News Release www.linear.com Programmable Hex Voltage Supervisor Has 1% Threshold Accuracy & Built-In EEPROM MILPITAS, CA – April 22, 2014 – Linear Technology Corporation introduces the LTC2933 programmable voltage supervisor with built-in EEPROM for simultaneous, accurate monitoring of up to six voltage rails from 0.2V to 13.9V. Requiring no external resistors to set thresholds, the LTC2933 provides an I2C/SMBus interface to access onboard EEPROM, so users can quickly configure the device and review faults or violation history through the easy-to-use LTpowerPlayTM graphical user interface. Six voltage monitoring channels, including one highvoltage channel, offer a choice of input ranges, and 1% guaranteed threshold accuracy over temperature. The LTC2933’s tight 1% power supply threshold accuracy reduces the required system voltage margin, compared to less accurate voltage supervisors. Each channel of the LTC2933 can be programmed to one of 256 available overvoltage (OV) and undervoltage (UV) fault or warning thresholds, which can be disabled for margining purposes. This highly configurable device offers two general purpose inputs (GPIs) that can be configured as manual reset, UV disable, margin enable, or auxiliary comparator inputs. In addition, three general purpose inputs/outputs (GPIOs) can be mapped to respond to any combination of these user-defined inputs, power supply faults, as /ALERT outputs per the SMBus standard, or as interrupts to provide maximum design flexibility. The output type (opendrain or weak pull-up), polarity, and delay-on-release response time can be individually selected for all GPIO pins. A well-regulated 3.3V output can be used to monitor negative supplies. Three pin-selectable I2C addresses are also available. Programmable Hex Voltage Supervisor Has 1% Threshold Accuracy & Built-In EEPROM page 2 The LTC2933 is designed to increase system reliability in applications including network servers, data storage, telecommunications equipment, industrial control, and high availability computer systems. The LTC2933 uses an EEPROM to store configuration data that has been tested over temperature and guarantees at least 10 years of data retention. The LTC2933 is available today in commercial and industrial versions, supporting operating temperature ranges from 0°C to 70°C and -40°C to 85°C, respectively. The device is offered in a small RoHS-compliant 16-pin 5mm x 4mm DFN or narrow 16-lead SSOP package. Pricing starts at $4.85 each in 1,000 piece quantities. For more information, visit www.linear.com/product/LTC2933 Photo Caption: 1% Accurate Hex Voltage Supervisor with Programmable OV/UV Trip Thresholds Summary of Features: LTC2933 Supervises 6 Power Supplies I2C Adjustable UV & OV Trip Points Guaranteed Threshold Accuracy: ±1% I2C/SMBus Interface Internal EEPROM 256 Programmable Thresholds per Channel Up to Three Range Settings per Channel Two General Purpose Inputs Three General Purpose Inputs/Outputs Programmable Output Delays Supply Voltage Range, 3.4V to 13.9V Supply Voltage Power Sharing from V1 to V4 5mm x 4mm 16-Pin DFN & Narrow SSOP-16 Packages Programmable Hex Voltage Supervisor Has 1%Threshold Accuracy & Built-In EEPROM page 3 About Linear Technology Linear Technology Corporation, a member of the S&P 500, has been designing, manufacturing and marketing a broad line of high performance analog integrated circuits for major companies worldwide for over three decades. The Company’s products provide an essential bridge between our analog world and the digital electronics in communications, networking, industrial, automotive, computer, medical, instrumentation, consumer, and military and aerospace systems. Linear Technology produces power management, data conversion, signal conditioning, RF and interface ICs, µModule® subsystems, and wireless sensor network products. For more information, visit www.linear.com , LT, LTC, LTM, Linear Technology, the Linear logo and µModule are registered trademarks and LTpowerPlay is a trademark of Linear Technology Corp. All other trademarks are the property of their respective owners. Press Contacts: North America / Worldwide UK & Nordic John Hamburger, Director Marketing Communications [email protected] Tel: 408-432-1900 ext 2419 Alan Timmins [email protected] Tel: +44-1-252-629937 Doug Dickinson, Media Relations Manager [email protected] Tel: 408-432-1900 ext 2233