MKP338 6 Y2 www.vishay.com Vishay BCcomponents Interference Suppression Film Capacitor - Class Y2 Radial MKP 300 VAC - Line to Ground Application FEATURES • • • • 7.5 mm to 27.5 mm lead pitch AEC-Q200 qualified (rev. C) Robust design Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Standard line bypass (between line and ground) Y2 applications • Line bypass application for continuous operation See also application note: www.vishay.com/doc?28153 QUICK REFERENCE DATA 0.001 μF to 0.47 μF (preferred values acc. to E6) ± 20 %, ± 10 %, ± 5 % 300 VAC; 50 Hz to 60 Hz 1000 VDC 55/105/56/C for product volumes 1750 mm3 55/105/56/B for volumes 1750 mm3 105 °C IEC 60384-14 and EN 60384-14 IEC 60065 requires pass. flamm. class B for volumes > 1750 mm3 UL 60384-14; ENEC; CSA E 384-14-95 Polypropylene film Metallized film Series construction Capacitance range (E12 series) Capacitance tolerance Rated AC voltage Permissible DC voltage Climatic testing class acc. to IEC 60068-1 Maximum application temperature Reference standards Dielectric Electrodes Construction Triple construction Encapsulation Leads Marking Plastic case, epoxy resin sealed, flame retardant class UL 94 V-0 Tinned wire C-value; tolerance; rated voltage; sub-class; manufacturer’s type designation; code for dielectric material; manufacturer location, year and week; manufacturer’s logo or name; safety approvals Note • For more detailed data and test requirements, contact [email protected] DIMENSIONS l w h lt P Revision: 25-Sep-15 Ø dt Document Number: 28114 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP338 6 Y2 www.vishay.com Vishay BCcomponents COMPOSITION OF CATALOG NUMBER TYPE AND PITCHES 7.5 mm 10.0 mm 338 6 15.0 mm Y2 22.5 mm 27.5 mm BFC2 2222 (*) MULTIPLIER (nF) 0.1 2 1 3 10 4 100 5 CAPACITANCE (numerically) 338 338 6X 6X XX X XX X Example: 104 = 10 x 10 = 100 nF (except special numbers) (*) old ordering code TYPE PACKAGING Loose in box 338 6 Y2 Taped ammo Taped reel Loose in box TYPE 338 6 Y2 Taped ammo Taped reel PACKAGING STANDARD DIMENSIONS Lead length 3.5 mm + 1 mm/- 0.5 mm (pitch 7.5 mm and 10 mm) Lead length 3.5 mm ± 0.3 mm (pitch > 10 mm) Lead length 5 mm ± 1 mm Lead length 25 mm ± 2 mm Pitch 7.5 mm only; H = 18.5 mm; P0 = 12.7 mm Pitch 7.5 mm to 15 mm; H = 18.5 mm Lead length 3.5 mm + 1 mm/- 0.5 mm (pitch 7.5 mm and 10 mm) Lead length 3.5 mm ± 0.3 mm (pitch > 10 mm) Lead length 5 mm ± 1 mm Lead length 25 mm ± 2 mm Pitch 7.5 mm only; H = 18.5 mm; P0 = 12.7 mm Pitch 7.5 mm to 15 mm; H = 18.5 mm ALTERNATIVE PITCH SIZES AND TOLERANCES Packaging like 20 % and alternative pitch sizes Alternative pitch size C-TOL. PREFERRED TYPES BFC2 338 60 BFC2 338 62 BFC2 338 64 BFC2 338 66 BFC2 338 68 20 % BFC2 338 61 10 % C-TOL. 5% 10 %/20 % BFC2 338 63 BFC2 338 65 BFC2 338 67 BFC2 338 68 PREFERRED TYPES See tables for details Note (1) For detailed tape specification refer to “Packaging Information” www.vishay.com/doc?28139 SPECIFIC REFERENCE DATA DESCRIPTION VALUE Rated AC voltage (URAC) 300 V Permissible DC voltage (URDC) 1000 V Tangent of loss angle C 470 nF Rated voltage pulse slope (dU/dt)R at 420 VDC R between leads, for C 0.33 μF at 100 V; 1 min RC between leads, for C > 0.33 μF at 100 V; 1 min R between leads and case; 100 V; 1 min at 1 kHz at 10 kHz 10 x 10-4 20 x 10-4 100 V/μs > 15 000 M > 5000 s > 30 000 M Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s 3400 V; 1 min Withstanding (AC) voltage between leads and case 2100 V; 1 min Maximum application temperature 105 °C Note (1) See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169 Revision: 25-Sep-15 Document Number: 28114 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP338 6 Y2 www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION - PITCH 7.5 mm CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING URAC (V) CAP. (μF) 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (3) SHORT LEADS LONG LEADS AMMOPACK REEL Ø = 500 mm (1)(2) lt = 3.5 mm lt = lt = 5.0 mm H = 18.5 mm; H = 18.5 mm; + 1 mm / SPQ 25.0 mm SPQ SPQ SPQ P0 = 12.7 mm ± 1.0 mm P0 = 12.7 mm - 0.5 mm ± 2.0 mm PITCH = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm; C-tol. = ± 20 % (URDC = 1000 V) 60102 62102 64102 66102 60122 62122 64122 66122 60152 62152 64152 66152 4.0 x 9.0 x 10.0 0.4 1500 1000 1250 60182 62182 64182 66182 60222 62222 64222 66222 60272 62272 64272 66272 60332 62332 64332 66332 5.0 x 10.5 x 10.0 0.4 1000 1250 1000 60392 62392 64392 66392 60472 62472 64472 66472 6.0 x 11.5 x 10.0 0.8 750 1000 750 60562 62562 64562 66562 68129 68131 68132 68133 68134 68135 68136 68137 68138 68139 2500 2000 1900 PITCH = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm; C-tol. = ± 10 % (URDC = 1000 V) 0.0010 61102 63102 65102 0.0012 61122 63122 65122 61152 63152 61182 63182 0.0022 61222 63222 65222 0.0027 61272 63272 65272 0.0033 61332 63332 61392 63392 61472 61562 63472 63562 0.0015 0.0018 300 0.0039 0.0047 0.0056 4.0 x 9.0 x 10.0 0.4 5.0 x 10.5 x 10.0 0.4 6.0 x 11.5 x 10.0 0.8 1500 1000 750 65152 65182 65332 65392 65472 65562 1250 68179 68181 68182 68183 68184 68185 2500 67332 67392 1000 68186 68187 2000 67472 67562 750 68188 68189 1900 1000 67102 67122 67152 67182 67222 67272 1250 1000 PITCH = 7.5 mm ± 0.4 mm; dt = 0.50 mm ± 0.05 mm; C-tol. = ± 5 % (URDC = 1000 V) 0.0010 68215 68225 68216 68226 68217 68227 0.0018 68218 68228 68238 0.0022 68219 68229 68239 68339 68351 0.0027 68221 68231 68241 68341 68352 68222 68232 0.0012 0.0015 0.0033 0.0039 0.0047 4.0 x 9.0 x 10.0 0.4 5.0 x 10.5 x 10.0 0.4 6.0 x 11.5 x 10.0 0.8 68223 68233 68224 68234 68235 68335 68236 1500 1000 750 68237 68242 68243 68244 68346 68336 1000 68337 68347 1250 68338 1250 1000 68342 68343 68344 68348 2500 68349 1000 750 68353 68354 68355 2000 1900 Notes • SPQ = Standard Packing Quantity (1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139 0 (2) Reel diameter = 365 mm is available on request (3) Weight for short lead product only Revision: 25-Sep-15 Document Number: 28114 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP338 6 Y2 www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION - PITCH 10 mm CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING URAC (V) CAP. (μF) 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (3) SHORT LEADS LONG LEADS REEL Ø = 500 mm (1)(2) AMMOPACK lt = 3.5 mm lt = lt = 5.0 mm H = 18.5 mm; H = 18.5 mm; + 1 mm / SPQ 25.0 mm SPQ SPQ SPQ P0 = 12.7 mm ± 1.0 mm P0 = 12.7 mm - 0.5 mm ± 2.0 mm PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-tol. = ± 20 % (URDC = 1000 V) 68392 68401 68409 68393 68402 68411 68394 68403 68412 68395 68404 68413 4.0 x 10.0 x 12.5 0.6 1000 1250 68396 68405 68414 68397 68406 68415 68398 68407 68416 68399 68408 68417 68101 68106 68112 5.0 x 11.0 x 12.5 0.82 68102 68107 1000 68113 1000 68103 68108 68114 68104 68109 68115 6.0 x 12.0 x 12.5 1.1 750 750 68105 68111 68116 68418 68419 68421 68422 68423 68424 68425 68426 68141 68142 68143 68144 68145 1400 1100 900 PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-tol. = ± 10 % (URDC = 1000 V) 0.0010 68436 68445 68454 68463 0.0012 68437 68446 68455 68464 0.0015 68438 68447 68456 68465 0.0018 68439 68448 68457 68441 68449 0.0027 68442 68451 68459 0.0033 68443 68452 68461 0.0039 68444 68453 68462 68471 0.0047 68159 68164 68168 68191 68161 68165 0.0022 300 0.0056 0.0068 0.0082 4.0 x 10.0 x 12.5 0.6 5.0 x 11.0 x 12.5 0.82 6.0 x 12.0 x 12.5 1.1 68162 68166 68163 68167 1000 1000 750 68458 68169 68171 68172 68466 1250 68467 - - 1000 68468 68469 68192 68193 750 1400 68194 1100 900 PITCH = 10.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-tol. = ± 5 % (URDC = 1000 V) 0.0010 68481 68489 68498 68507 0.0012 68482 68491 68499 68508 0.0015 68483 68492 68501 68509 0.0018 68484 68493 68502 68485 68494 0.0027 68486 68495 68504 0.0033 68487 68496 68505 0.0039 68488 68497 68506 68515 0.0047 68245 68249 68254 68357 68246 68251 0.0022 0.0056 0.0068 0.0082 4.0 x 10.0 x 12.5 0.6 5.0 x 11.0 x 12.5 0.82 6.0 x 12.0 x 12.5 1.1 68247 68252 68248 68253 1000 1000 750 68503 68255 68256 68257 68511 1250 68512 - 1000 750 - 1400 68513 68514 68358 68359 68361 1100 900 Notes • SPQ = Standard Packing Quantity (1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139 0 (2) Reel diameter = 365 mm is available on request (3) Weight for short lead product only Revision: 25-Sep-15 Document Number: 28114 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP338 6 Y2 www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION - PITCH 15 mm CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING URAC (V) CAP. (μF) DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (3) SHORT LEADS LONG LEADS lt = 3.5 mm lt = 5.0 mm SPQ ± 0.3 mm ± 1.0 mm REEL Ø = 500 mm (1)(2) AMMOPACK lt = H = 18.5 mm; H = 18.5 mm; 25.0 mm SPQ SPQ SPQ P0 = 12.7 mm P0 = 12.7 mm ± 2.0 mm PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-tol. = ± 20 % (URDC = 1000 V) 0.0068 0.0082 0.010 5.0 x 11.0 x 17.5 1.0 60682 62682 60822 62822 60103 62103 64682 1000 64822 64103 0.012 60123 62123 64123 0.015 60153 62153 64153 60183 62183 0.018 6.0 x 12.0 x 17.5 1.4 1000 64183 68146 68147 1000 - - 68148 68149 68151 1000 1100 68152 900 PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-tol. = ± 20 % (URDC = 1000 V) 0.022 0.027 0.033 0.039 0.047 0.056 7.0 x 13.5 x 17.5 1.8 8.5 x 15.0 x 17.5 2.4 10.0 x 16.5 x 17.5 3.0 60223 62223 60273 62273 60333 62333 60393 62393 60473 62473 60563 62563 750 750 500 64223 64273 64333 64393 64473 64563 68153 500 500 68154 - - 68155 68156 68157 450 68158 800 650 600 PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-tol. = ± 10 % (URDC = 1000 V) 0.0068 61682 63682 65682 68202 0.0082 61822 63822 65822 68203 61103 63103 0.010 300 5.0 x 11.0 x 17.5 1.0 1000 65103 - - 68204 0.012 61123 63123 0.015 61153 63153 65153 68206 61183 63183 65183 68207 0.018 6.0 x 12.0 x 17.5 1.4 65123 1000 1100 68205 900 PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-tol. = ± 10 % (URDC = 1000 V) 0.022 0.027 0.033 0.039 0.047 7.0 x 13.5 x 17.5 1.8 8.5 x 15.0 x 17.5 2.4 10.0 x 16.5 x 17.5 3 61223 63223 61273 63273 61333 63333 61393 63393 61473 63473 65223 750 65273 68208 500 - 65333 500 65393 65473 68209 - 68211 68212 450 68213 800 650 600 PITCH = 15.0 mm ± 0.4 mm; dt = 0.60 mm ± 0.06 mm; C-tol. = ± 5 % (URDC = 1000 V) 0.0068 0.0082 5.0 x 11.0 x 17.5 1.0 0.010 0.012 0.015 6.0 x 12.0 x 17.5 1.4 68258 68284 68309 68381 68259 68285 68311 68382 68261 68286 68262 68287 68313 68384 68263 68288 68314 68385 1000 68312 1000 - - 1100 68383 900 PITCH = 15.0 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-tol. = ± 5 % (URDC = 1000 V) 0.018 0.022 0.027 0.033 0.039 7.0 x 13.5 x 17.5 1.8 8.5 x 15.0 x 17.5 2.4 10.0 x 16.5 x 17.5 3.0 68264 68289 68315 68265 68291 68316 68266 68292 68267 68293 68268 68294 750 68317 68386 500 68318 500 68319 68387 - - 68388 68389 450 68391 800 650 600 Notes • SPQ = Standard Packing Quantity (1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139 0 (2) Reel diameter = 365 mm is available on request (3) Weight for short lead product only Revision: 25-Sep-15 Document Number: 28114 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP338 6 Y2 www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION - PITCH 22.5 mm CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING URAC (V) CAP. (μF) DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (3) SHORT LEADS LONG LEADS lt = 3.5 mm lt = 5.0 mm SPQ ± 0.3 mm ± 1.0 mm REEL Ø = 500 mm (1)(2) AMMOPACK lt = H = 18.5 mm; H = 18.5 mm; 25.0 mm SPQ SPQ SPQ P0 = 12.7 mm P0 = 12.7 mm ± 2.0 mm PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-tol. = ± 20 % (URDC = 1000 V) 0.047 7.0 x 16.5 x 26.0 0.068 8.5 x 18.0 x 26.0 68125 68124 68126 60683 62683 10.0 x 19.5 x 26.0 6.8 12.0 x 22.0 x 26.0 7.8 0.12 0.15 68127 200 3.8 0.082 0.10 68123 2.9 0.056 250 68128 64683 200 60823 62823 60104 62104 60124 62124 250 64823 200 64104 - - - - - - - 200 64124 150 60154 - 62154 200 64154 PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-tol. = ± 10 % (URDC = 1000 V) 0.047 7.0 x 16.5 x 26.0 2.9 0.056 8.5 x 18.0 x 26.0 300 0.082 68177 68176 68178 61683 63683 61823 63823 200 250 65683 65823 6.8 0.10 0.12 12.0 x 22.0 x 26.0 68175 68174 3.8 0.068 10.0 x 19.5 x 26.0 68173 61104 63104 61124 63124 7.8 0.15 - - 200 65104 65124 150 61154 63154 200 65154 PITCH = 22.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-tol. = ± 5 % (URDC = 1000 V) 0.047 7.0 x 16.5 x 26.0 2.9 0.056 8.5 x 18.0 x 26.0 68269 68295 68271 68296 3.8 0.068 68321 68322 250 200 68272 68297 68323 68273 68298 68324 68274 68299 0.082 10.0 x 19.5 x 26.0 6.8 12.0 x 22.0 x 26.0 7.8 0.10 0.12 68325 - 200 150 68275 68301 68326 Notes • SPQ = Standard Packing Quantity (1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139 0 (2) Reel diameter = 365 mm is available on request (3) Weight for short lead product only Revision: 25-Sep-15 Document Number: 28114 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP338 6 Y2 www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION - PITCH 27.5 mm CATALOG NUMBER BFC2 338 6X XXX AND PACKAGING URAC (V) CAP. (μF) DIMENSIONS wxhxl (mm) LOOSE IN BOX MASS (g) (3) SHORT LEADS LONG LEADS lt = 3.5 mm lt = 5.0 mm SPQ ± 0.3 mm ± 1.0 mm REEL Ø = 500 mm (1)(2) AMMOPACK lt = H = 18.5 mm; H = 18.5 mm; 25.0 mm SPQ SPQ SPQ P0 = 12.7 mm P0 = 12.7 mm ± 2.0 mm PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-tol. = ± 20 % (URDC = 1000 V) 0.18 0.22 0.27 0.33 0.39 0.47 13.0 x 23.0 x 31.0 9.2 15.0 x 25.0 x 31.0 12.3 18.0 x 28.0 x 31.0 16.1 21.0 x 31.0 x 31.0 20.3 60184 62184 60224 62224 60274 62274 60334 62334 60394 62394 60474 62474 100 100 100 50 64184 64224 64274 64334 64394 64474 125 125 - - - - - - - - 100 75 PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-tol. = ± 10 % (URDC = 1000 V) 300 0.18 13.0 x 23.0 x 31.0 9.2 61184 63184 0.22 15.0 x 25.0 x 31.0 12.3 61224 63224 18.0 x 28.0 x 31.0 16.1 21.0 x 31.0 x 31.0 20.3 0.27 0.33 0.39 0.47 61274 63274 61334 63334 61394 63394 61474 63474 65184 100 65224 65274 65334 50 65394 65474 125 100 - - 75 PITCH = 27.5 mm ± 0.4 mm; dt = 0.80 mm ± 0.08 mm; C-tol. = ± 5 % (URDC = 1000 V) 0.15 0.18 0.22 0.27 0.33 0.39 13.0 x 23.0 x 31.0 9.2 15.0 x 25.0 x 31.5 12.3 18.0 x 28.0 x 31.5 16.1 21.0 x 31.0 x 31.0 20.3 68276 68302 68277 68303 68278 68304 68279 68305 68281 68306 68282 68307 68327 68328 100 125 68329 68331 100 - - 68332 50 68333 75 Notes • SPQ = Standard Packing Quantity (1) H = in-tape height; P = sprocket hole distance; for detailed specifications refer to packaging information: www.vishay.com/doc?28139 0 (2) Reel diameter = 365 mm is available on request (3) Weight for short lead product only APPROVALS SAFETY APPROVALS Y2 VOLTAGE VALUE FILE NUMBERS LINK 300 VAC 1 nF to 470 nF FI 2013002 www.vishay.com/doc?28212 UL 60384-14 300 VAC 1 nF to 470 nF E354331 CSA-E384-14-95 300 VAC 1 nF to 470 nF E354331 CB-test certificate 300 VAC 1 nF to 470 nF FI 7754 EN 60384-14 (ENEC) (= IEC 60384-14 ed-3) www.vishay.com/doc?28189 www.vishay.com/doc?28213 The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the ENEC-agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg; Netherlands; Norway; Portugal; Slovenian; Spain; Switzerland and United Kingdom. Revision: 25-Sep-15 Document Number: 28114 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP338 6 Y2 www.vishay.com Vishay BCcomponents MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting in printed circuit boards by means of automatic insertion machines. For detailed tape specifications refer to packaging information: www.vishay.com/doc?28139 Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: • For pitches 15 mm capacitors shall be mechanically fixed by the leads • For larger pitches the capacitors shall be mounted in the same way and the body clamped Space Requirements on Printed-Circuit Board The maximum space for length (Imax.), width (wmax.), and height (hmax.) of film capacitors to take in account on the printed-circuit board is shown in the drawings: • For products with pitch 15 mm, w = l = 0.3 mm; h = 0.1 mm • For products with 15 mm < pitch, 27.5 mm, w = l = 0.5 mm; h = 0.1 mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. wmax. = W + Δ Eccentricity Imax. = I + Δ CBA116 hmax. = h + Δ Seating plane SOLDERING CONDITIONS For general soldering conditions and wave soldering profile, we refer to the application note: “Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171 Storage Temperature Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Revision: 25-Sep-15 Document Number: 28114 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP338 6 Y2 www.vishay.com Vishay BCcomponents CHARACTERISTICS 4 2 Dissipation factor (x 10-4) ΔC/C (%) 103 typical 0 102 nF 20 > 2 nF C 20 2 C≤ F < 47 n F n ≤ 47 nF < C 0 nF 1 0 ≤ 1 C max. -2 101 -4 min. -6 0 - 50 100 50 Tamb (°C) 100 1 10 Capacitance as a function of ambient temperature (typical curve) 102 103 104 f (Hz) 105 Tangent of loss angle as a function of frequency (typical curve) 10 102 1n 4.7 F nF 10 nF 2 101 f (MHz) Impedance (Ω) 103 101 47 nF 10 0n F 47 0n F Y2 100 0 10 10-1 10-2 104 105 106 107 f (Hz) 108 10-1 1 Impedance as a function of frequency (typical curve) 10 1000 C (nF) 10 000 100 Resonant frequency as a function of capacitance (typical curve) 103 AC voltage (V) AC current (mA) 103 470 nF 102 100 nF 47 nF 10 2 101 10 nF 4.7 nF 100 Tamb ≤ 105 °C 101 1 10 102 3 10 4 10 f (Hz) Max. RMS voltage as a function of frequency Revision: 25-Sep-15 5 10 10-1 101 1 nF Tamb ≤ 105 °C 2 10 10 3 104 f (Hz) 105 Max. RMS current as a function of frequency Document Number: 28114 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP338 6 Y2 www.vishay.com Vishay BCcomponents RC (s) 106 105 104 0 20 40 60 80 100 Tamb (°C) Insulation resistance as a function of ambient temperature APPLICATION NOTES • For Y2 electromagnetic interference suppression in standard line bypass applications (between line and ground) (50 Hz / 60 Hz) with a maximum mains voltage of 300 VAC. • For series impedance applications we refer to the application note: www.vishay.com/doc?28153 • For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact [email protected] • These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse program must be used. • The maximum ambient temperature must not exceed 105 °C. • Rated voltage pulse slope: if the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 420 VDC and divided by the applied voltage. INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-14 and Specific Reference Data”. GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) As specified in chapters “General Data” of this specification Initial measurements Capacitance Tangent of loss angle: at 10 kHz 4.3 Robustness of terminations Tensile: load 10 N; 10 s Bending: load 5 N; 4 x 90° 4.4 Resistance to soldering heat No pre-drying Method: 1A Solder bath: 280 °C ± 5 °C Duration: 10 s Revision: 25-Sep-15 No visible damage Document Number: 28114 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP338 6 Y2 www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.19 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min ± 0.5 min Recovery time: min. 1 h, max. 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance |C/C| 5 % of the value measured initially Tangent of loss angle Increase of tan 0.008 Compared to values measured initially Insulation resistance As specified in section “Insulation Resistance” of this specification SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 Initial measurements Capacitance Tangent of loss angle: at 10 kHz 4.20 Solvent resistance of the marking: Isopropylalcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 min ± 0.5 min 4.6 A = -55 °C B = +105 °C 5 cycles Duration t = 30 min Rapid change of temperature No visible damage Legible marking 4.6.1 Inspection Visual examination No visible damage 4.7 Mounting: see section “Mounting” of this specification Procedure B4: Frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s2 (whichever is less severe) Total duration 6 h 4.7.2 Final inspection Visual examination No visible damage 4.9 Mounting: see section “Mounting” for more information Pulse shape: half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms Vibration Shock 4.9.2 Final measurements Revision: 25-Sep-15 Visual examination No visible damage Capacitance |C/C| 5 % of the value measured initially Tangent of loss angle Increase of tan 0.008 Compared to values measured initially Insulation resistance As specified in section “Insulation Resistance” of this specification Document Number: 28114 11 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP338 6 Y2 www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.11 Climatic sequence 4.11.1 Initial measurements Capacitance measured in 4.4.2 and 4.9.2 Tangent of loss angle: measured initially in C1A and C1B 4.11.2 Dry heat Temperature: 105 °C Duration: 16 h 4.11.3 Damp heat cyclic Test Db First cycle 4.11.4 Cold Temperature: -55 °C Duration: 2 h 4.11.5 Damp heat cyclic Test Db remaining cycles 4.11.6 Final measurements Visual examination No visible damage Legible marking Capacitance |C/C| 5 % of the value measured in 4.11.1. Tangent of loss angle Increase of tan 0.008 Compared to values measured in 4.11.1 Voltage proof 2250 VDC; 1 min between terminations No permanent breakdown or flash-over Insulation resistance 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C2 4.12 Damp heat steady state 56 days, 40 °C, 90 % to 95 % RH, no load Capacitance 4.12.1 Initial measurements Tangent of loss angle at 1 kHz 4.12.3 Final measurements Visual examination No visible damage Legible marking Capacitance |C/C| 5 % of the value measured in 4.12.1. Tangent of loss angle Increase of tan 0.007 Compared to values measured in 4.12.1. Voltage proof 2250 VDC; 1 min between terminations No permanent breakdown or flash-over Insulation resistance 50 % of values specified in section “Insulation Resistance” of this specification Revision: 25-Sep-15 Document Number: 28114 12 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP338 6 Y2 www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C3 4.13.1 Initial measurements Capacitance Tangent of loss angle: at 10 kHz 4.13 Impulse voltage 3 successive impulses, full wave, peak voltage: X1: 5 kV Max. 24 pulses 4.14 Endurance Duration: 1000 h 1.7 x URAC at 105 °C Once in every hour the voltage is increased to 1000 VRMS for 0.1 s via resistor of 47 ± 5 % 4.14.7 Final measurements No selfhealing breakdowns or flash-over Visual examination No visible damage Legible marking Capacitance |C/C| 10 % compared to values measured in 4.13.1. Tangent of loss angle Increase of tan 0.008 Compared to values measured in 4.13.1. Voltage proof 2250 VDC; 1 min between terminations 2100 VAC; 1 min between terminations and case No permanent breakdown or flash-over Insulation resistance 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C4 4.15 Charge and discharge 10 000 cycles charged to 420 VDC Discharge resistance: 420 V DC R = ---------------------------------------1.5 x C (dU/dt) 4.15.1 Initial measurements Capacitance Tangent of loss angle: at 10 kHz 4.15.3 Final measurements Capacitance |C/C| 10 % compared to values measured in 4.15.1. Tangent of loss angle Increase of tan 0.008 Compared to values measured in 4.15.1. Insulation resistance 50 % of values specified in section “Insulation Resistance” of this specification Revision: 25-Sep-15 Document Number: 28114 13 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP338 6 Y2 www.vishay.com Vishay BCcomponents GROUP C INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C5 4.16 Radio frequency characteristic Resonance frequency 0.9 times the value as specified in section “Resonant Frequency” of this specification Bore of gas jet: Ø 0.5 mm Fuel: Butane Test duration for actual volume V in mm3: V 250: 10 s 250 < V 500: 20 s 500 < V 1750: 30 s V > 1750: 60 s One flame application After removing test flame from capacitor, the capacitor must not continue to burn for more than 10 s. No burning particle must drop from the sample. SUB-GROUP C6 4.17 Passive flammability Class B 12 mm ~ 8 mm 45.0 ° SUB-GROUP C7 4.18 Active flammability Revision: 25-Sep-15 20 cycles of 5 kV discharges on the test capacitor connected to URAC. The cheese cloth around the capacitors shall not burn with a flame. No electrical measurements are required. Document Number: 28114 14 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000