2 1 THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. PART NUMBER MATERIAL SEE DETAIL H100X122H1T-2 GMUHS B H200X122H1T-2 GMUHS A H100X122H2T-2 GMUHS B H200X122H2T-2 GMUHS A DETAIL A 1.00 [25.4] 2.00 [50.8] 1.00 [25.4] 2.00 [50.8] DETAIL B "B" "A" TYP. TUBING LENGTH "B" "A" TYP. .75 19.0 "A" +/-.062 NOTES: 1. MILLIMETER ARE IN [ .75 19.0 INSIDE NOMINAL DIA. "B" +/-.062 3.50 [88.9] MARKER ACROSS TUBING COLOR PKG. QTY. SEE STYLE 2 WHITE 500 A 1 WHITE 250 A 2 YELLOW 500 A 1 YELLOW 250 A 3/4 in. [19.0 mm] ]. HEAT SHRINK TUBING STYLE A B B 1.22 31.0 .062 TYP. 1.708 1.6 43.4 .062 1.6 TYP. REPEAT 1 FOLD PERFORATION, TYP. TEAR PERFORATION, TYP. BUTT-CUT PERFORATION, TYP. CLEAR CARRIER CLEAR POLYESTER TAPE TITLE H***X122H*T-2 A A TWO-SIDED HEAT SHRINK LABEL CUSTOMER DRAWING ITEM REVISION NAME I00472XF/03 DATASET FILE NAME I00472XF_DC_C10742/03C MATERIAL: 2 D10100DA/16 1 0 1/22/14 RVU SEWH MSAD UPDATE THE CURRENT PANDUIT LOGO. CHANGING PKG. QTY. TO ALLOW ROLL TO FIT SCWE INTO STD. PKG. 500 WAS 1000. 250 WAS 500. 8/21/09 RVU GAECN01410 5832 UNLESS OTHERWISE SPECIFIED, DIMENSIONAL TOLERANCES ARE: IN [mm] .X .XX 7/7/09 RVU DATE BY .XXX .020 [5.08] ANGLES HEAT SHRINK TUBING, GMUHS31 DRAWING NUMBER: SCWE DRAWING RELEASE. 5791 THIRD ANGLE PROJECTION DRAWN BY REV .12 [3.05] .062 [1.57] CHK APR DESCRIPTION 2 ECN RVU DATE CHK 7/7/09 C10642 SIZE SCALE NTS SCWE 1 SHT 1 OF 1 A