PAN-WAY TYPE LDS SURFACE RACEWAY JUNCTION BOX Part Number(s): LDS3, LDS5, LMD3, LMD5 INSTALLATION INSTRUCTIONS © Panduit Corp. 2011 1. PN62 2. 2A. The mounting hardware used to secure the raceway shall be appropriate for the mounting surface. Fill Capacity Table For: Voice Grade 24 AWG UTP and Data Grade 24 AWG UTP Cables Data Grade Cables Voice Grade Cables 24 AWG UTP CM/CMR Raceway Type 24 AWG UTP CM 4 pr 25pr DIA.: 0.190” Cat.5- 4 pr Cat.6 DIA.:0.217” DIA.: 0.422” DIA.: 0.275” 40% FILL 20% FILL LDS3 1 2 0 0 0 1 0 1 LDS5 2 5 0 0 2 4 1 2 20% FILL 40% FILL 20% FILL 40% FILL 20% FILL 40% FILL POWER CABLING - ADDITIONAL INSTRUCTIONS 3. Installation/removal REQUIRES individual routing of wires. 3A. 16" 2" Fill Capacity Table For: Electrical Cables Electrical Raceway Type Mounting Strap #8 PANHEAD LDS3: Use LMD3 LDS5: Use LMD5 12 AWG 10 AWG THHN THHN THHN T90 T90 T90 DIA: 0.105" DIA: 0.122" DIA: 0.153" LDS3 9 6 4 LDS5 12 8 5 * WIRES NOT BUNDLED E-mail: [email protected] For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp 14 AWG www.panduit.com Page 1 of 1 Fax: (815) 836-0394 Rev. 03