PCRT1 - Installation Instructions

© Panduit Corp. 2014
PA25513A01
Rev. 04 10-2014
PCRT1
PCRT1
TOOL ARMS
LOCK, TOGGLE
[SHOWN IN THE “CLOSED”
(LOCKED) POSITION]
• The open arms allow the operator to pass over cabling that
interferes with plug accessibility
• PCRT1 can be used “open” (unlocked) for copper patch
cord plugs
• PCRT1 can be used “closed” (locked) for fiber optic patch
cord connectors
• PCRT1 can be used by either right or left handed operators
ERGONOMIC GRIPS
PCRT1 is supplied with three different style
connector boots:
• (2) for LC/SC fiber optic patch cord connectors, color: black
• (2) for ST fiber optic patch cord connectors, color: black
• (1) for PVIQ copper patch cord plugs, color: off-white
OPERATION
1. If working with fiber optic patch cord connectors, apply desired
boots to the tool arms.
2. Place the arms on the fiber optic patch cord connector or copper
patch cord plug-latch (see figures below); the tool grip is
squeezed lightly to obtain a firm grip on the connector/plug.
3. Pulling the tool in a backwards direction will remove the
connector/plug from the module.
4. To install connector/plug, place connector/plug in arms, lightly
squeeze grip (tool will hold connector/plug-latch), and push
connector/plug into module with latch on the bottom.
Shown with
LC Fiber Optic Connector
Shown with
ST Fiber Optic Connector
Shown with
PVIQ Copper Plug
Page: 1 of 2
LC / SC
BOOTS
SHOWN
NOTE: No boots are required for
installing or removing
standard RJ45 copper
patch cord plugs.
Shown with
RJ45 Copper Plug
WARNING:
PATCH CORD REMOVAL TOOL
When using this tool (as with any tool)
in a static sensitive area, the operator
should use an industry approved, standard
grounding wrist strap system.
Part No.:
PCRT1
FOR INSTALLING OR REMOVING:
COPPER PATCH CORD PLUGS AND
FIBER OPTIC PATCH CORD CONNECTORS
www.panduit.com
Technical Support:
1-888-506-5400, ext. 86914
E-mail:
[email protected]
Panduit United Arab Emmerites
Dubai Internet City, Dubai
Tel: +971 4 3625435 /6 • Fax: +971 4 3908830
E-mail: [email protected]
Panduit Europe, EMEA Service Center
Almelo, Netherlands
Panduit China, Beijing
Xuanwumen Xidajie Xicheng District
Beijing, China
Tel: 8610 6641 0371 • Fax: 8610 6641 0375
Toll Free Customer Service:
North China: 10800 6500 211
South China: 10800 2650 211
E-mail: [email protected]
Tel: +31 (0) 546-580-452 • Fax: +31 (0) 546 580 441
EU Website: www.panduit.com/emea
E-mail: [email protected]
Panduit Latin America Headquarters
Guadalajara, Jalisco, Mexico
Tel: +52 (33) 3777-6000 • Fax: +52 (33) 3777-6010
Página web: www.panduit.com
Correo electrónico: [email protected]
Panduit Singapore - Sales Office
Singapore, Republic of Singapore
Tel: 65 6379 6700 • Fax: 65 6379 6759
E-mail: [email protected]
Panduit Australia, Melbourne (Head Office)
Dandenong, VIC
Aus. Tel: 1-800-PANDUIT / 1-800-726-384
Fax: 1-800-637-889
Email: [email protected]
PCRT1 TOOL shown with KPCRT1-FL Flashlight Kit
NOTE:
In the interest of higher quality and value, Panduit products are
continually being improved and updated. Consequently, pictures
may vary from the enclosed product.
Page: 2 of 2
REPLACEMENT KITS AVAILABLE
(Sold Separately)
KPCRT1-FL Flashlight Kit
KPCRT1-TK PCRT1 Replacement TIp Kit