8-Port IndustrialNet DIN Rail Mount Copper Patch Panel Part Number: CDPP8** © Panduit Corp. 2012 INSTALLATION INSTRUCTIONS PN557 CDPP8** 2 1 Orient base as shown Latches Base DIN Rail 3 Latches Base DIN Rail ** Denotes color. For Technical Support: www.panduit.com/resources/install_maintain.asp Page 1 of 2 INSTALLATION INSTRUCTIONS © Panduit Corp. 2012 4 Faceplate Single port Mini-Com modules (sold separately) Orient modules as shown. PN557 5 Route cables up or down through slot. Note: Reference module instruction sheets for termination instructions. 6 7 #6-32 x 3/8" screws Labels Label Covers Torque screws to 5 - 8 lb-in. Optional Surface Mounting 1 2 Use mounting screws to secure the base to the surface. #10-32 screws recommended. Latches Base 6-3/8" E-mail: [email protected] For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp www.panduit.com Page 2 of 2 Phone: 866-405-6654