Photoelectric sensors FLDK 110G1903/S42 Copy counters dimension drawing 30 50 45 LED M16 x 0,75 65 ° 56 laser beam 6 24 M6 ø 6 110 98 13 13,5 9 8,5 15 M8 x 1 22 general data photo measuring distance Sd 0 ... 120 mm optimum operating distance 70 mm object speed < 5 m/sec sensitivity single sheet/edge thickness 0,25 mm sync. input yes measuring point visible red laser line 2 mm light source pulsed red laser diode wave length 650 nm laser class 2 edge indicator LED yellow power on indication LED green electrical data voltage supply range +Vs 10 ... 30 VDC current consumption max. (no load) 200 mA output circuit push-pull short circuit protection yes reverse polarity protection yes connection diagram S42 (2) (6) (8) 200mA 10 Ω polyfuse (7) +VS output ground mechanical data width / diameter 30 mm type rectangular housing material PA 6 connector base (main connector) DIN 45326, 8 pin front (optics) glass laser warning Wavelength: 620...680nm Max. av. Output: < 1mW IEC 60825-1, Ed. 2, 2007 CLASS 2 LASER PRODUCT Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice No. 50, dated June 24, 2007 ambient conditions operating temperature 0 ... +50 °C protection class IP 54 FLDK 110G1903/S42 LASER RADIATION DO NOT STARE INTO BEAM www.baumer.com 24/4/2015