For more information, please visit the product page. date 11/28/2012 page 1 of 3 MODEL: SJ-3506-SMT │ DESCRIPTION: MID MOUNT AUDIO JACK FEATURES • mid mount for low profile applications • shielded • Two switch configuration, one normally open, one isolated and normally closed SPECIFICATIONS parameter conditions/description min typ rated input voltage rated input current contact resistance between terminal and mating plug between terminal in a closed circuit1 insulation resistance at 500 Vdc voltage withstand at 50/60Hz for 1 minute 1 A 50 30 mΩ mΩ MΩ 0.3 terminal strength any direction for 10 seconds operating temperature -25 life 500 Vac 3 kg 500 g 85 °C 5,000 RoHS units Vdc 100 insertion/withdrawal force Notes: max 12 cycles yes 1. When measured at a current of less than 100 mA / 1 kHz 2. Add suffix “-TR” to the model number for tape and reel packaging. SOLDERABILITY parameter conditions/description min typ max units reflow soldering see reflow profile 255 260 265 °C 270 260 250 240 217 180 150 120 60 50 °C 70 60 140 120 250 180 240 Time (second) cui.com 340 300 380 360 430 420 480 For more information, please visit the product page. CUI Inc │ MODEL: SJ-3506-SMT │ DESCRIPTION: MID MOUNT AUDIO JACK date 11/28/2012 │ page 2 of 3 MECHANICAL DRAWING units: mm[inches] tolerance: X.X ±0.2mm X.XX ±0.1mm X.XXX ±0.05mm MATERIAL PLATING terminal 1 copper alloy gold flash terminal 2 copper alloy gold flash terminal 3 copper alloy gold flash terminal 4 copper alloy gold lfash terminal 5 copper alloy gold flash terminal 6 copper alloy gold flash shield copper alloy nickel plated bushing brass nickel plated plastic PA6T 15.2 0.598 12.8 0.504 3.00 0.118 6.40 0.252 0.20 0.008 2.30 0.091 0.25 0.010 4.60 0.181 2.0 0.079 6.00 0.236 0.80 0.031 (8 PLCS) 3.600 0.142 9.7 0.382 0.50 0.020 9.6 0.378 1.85 0.073 0.2 (2 PLCS) 11.80 0.465 5.88 0.231 0.2. (2 PLCS) 6 9.0 0.354 0.50 0.020 (2 PLCS) 0.70 0.028 11.5 0.453 (2 PLCS) 1 2 9.7 0.382 5.88 0.231 (2 PLCS) 1.85 0.073 (2 PLCS) 5.00 0.197 6.0 0.236 2 1 3 6 R0.5 0.020 MAX (2 PLCS) 5 4 10.25 0.404 Model No. Schematic PCB LAYOUT TOP VIEW SJ-3506-SMT SHIELDING 1 2 6 3 4 5 11.8 0.465 9.0 0.354 11.5 0.453 (2 PLCS) 13.3 0.524 PIN 1 sleeve 2 tip 3 ring 4 isolated ring 5 isolated ring switch (N-O) 6 tip switch 4 5 ø3.5 mating plug cui.com 3 1.00X0.70 (8 PLCS) 1.50X1.20 (8 PLCS) For more information, please visit the product page. CUI Inc │ MODEL: SJ-3506-SMT │ DESCRIPTION: MID MOUNT AUDIO JACK date 11/28/2012 │ page 3 of 3 REVISION HISTORY rev. description date 1.0 initial release 06/28/2011 1.01 added TR package option, updated schematic 11/28/2012 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.