Datasheet

UNISONIC TECHNOLOGIES CO., LTD
MBR20120C
Preliminary
DIODE
20A SCHOTTKY BARRIER
RECTIFIER

DESCRIPTION
The UTC MBR20120C is a 20A schottky barrier rectifier, it uses
UTC’s advanced technology to provide the customers with high surge
capability, high efficiency, high current capability, low power loss and
low forward voltage drop, etc.
The UTC MBR20120C is suitable for free wheeling and polarity
protection, etc.

FEATURES
* High surge capability
* High efficiency
* Low power Loss and low forward voltage drop


SYMBOL
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
MBR20120CL-TA3-T
MBR20120CG-TA3-T
MBR20120CL-TF3-T
MBR20120CG-TF3-T
Note: Pin Assignment: A: Anode
K: Cathode

Package
TO-220
TO-220F
Pin Assignment
1
2
3
A
K
A
A
K
A
Packing
Tube
Tube
MARKING
www.unisonic.com.tw
Copyright © 2014 Unisonic Technologies Co., Ltd
1 of 3
QW-R202-010.a
MBR20120C

Preliminary
DIODE
ABSOLUTE MAXIMUM RATING (TA=25°C, unless otherwise specified)
PARAMETER
SYMBOL
RATINGS
UNIT
Peak Repetitive Reverse Voltage
VRRM
120
V
Working Peak Reverse Voltage
VRWM
120
V
DC Blocking Voltage
VR
120
V
RMS Reverse Voltage
VR(RMS)
84
V
10
Per Leg
Average Forward Rectified Output
A
IO
Current (TC=125°C)
Total
20
Non-Repetitive Peak Forward Surge Current 8.3ms Single
IFSM
150
A
half sine-wave
Junction Temperature
TJ
-55~+150
°C
Storage Temperature
TSTG
-55~+150
°C
Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. Pulse width≤300μs, duty cycle≤2%.

THERMAL CHARACTERISTICS (PER LEG)
PARAMETER
SYMBOL
θJA
Junction to Ambient
Junction to Case

TO-220
TO-220F
θJC
RATINGS
62.5
2
2.2
UNIT
°C/W
°C/W
ELECTRICAL CHARACTERISTICS(Note 2)
PARAMETER
SYMBOL
Instantaneous Forward Voltage Drop
VF
Instantaneous Reverse Current
IR
TEST CONDITIONS
IF=10A, TC=25°C
IF=10A, TC=125°C
IF=20A, TC=25°C
IF=20A, TC=125°C
Rated DC Voltage, TC=25°C
Rated DC Voltage, TC=125°C
MIN
TYP MAX UNIT
0.88
0.78
V
0.95
0.85
100 μA
15
mA
Notes: 1. 2.0μs Pulse Width, f = 1.0KHz.
2. Pulse Test: Pulse Width=380µs, Duty Cycle ≤ 2.0%.
3. Applied VR = 4.0V and f = 1.0MHz.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 3
QW-R202-010.a
MBR20120C
Preliminary
DIODE
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 3
QW-R202-010.a