UNISONIC TECHNOLOGIES CO., LTD MGBR5L100 Preliminary DIODE MOS GATED BARRIER RECTIFIER DESCRIPTION The UTC MGBR5L100 is a surface mount mos gated barrier rectifier,it uses UTC’s advanced technology to provide customers withlow forward voltage drop and high switching speed, etc. FEATURES * Low forward voltage drop * High switching speed SYMBOL SMA TO-252 DFN-8(5×6) ORDERING INFORMATION Ordering Number Lead Free Halogen Free MGBR5L100L-TN3-T MGBR5L100G-TN3-T MGBR5L100G-K08-5060-R MGBR5L100L-SMA-R MGBR5L100G-SMA-R Note: Pin Assignment: A: Anode K: Cathode www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd Package TO-252 DFN-8(5×6) SMA 1 A A K Pin Assignment 2 3 4 5 6 7 8 K A - - - - A A NC K K K K A - - - - - - Packing Tube Tape Reel Tape Reel 1 of 4 QW-R204-039.d MGBR5L100 Preliminary DIODE MARKING Package MARKING TO-252 DFN-8(5×6) SMA Cathode Band for uni-directional Only UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw UTC 5L100 Date Code L: Lead Free G: Halogen Free 2 of 4 QW-R204-039.d MGBR5L100 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load,derate current by 20%. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VRM 100 V Working Peak Reverse Voltage VRWM 100 V Repetitive Peak Reverse Voltage VRRM 100 V RMS Reverse Voltage VR(RMS) 70 V Average Rectified Output Current TC=80°C IO 5 A Non-Repetitive Peak Forward Surge Current 8.3ms IFSM 100 A Single Half Sine-Wave Superimposed on Rated Load Operating Junction Temperature TJ -65 ~ +150 °C Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA (Note 3) PARAMETER Junction to Ambient Junction to Case SYMBOL TO-252 DFN-8(5×6) SMA TO-252 DFN-8(5×6) SMA θJA θJC RATINGS 32 72 75 2.5 2.4 35 UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS(TA=25°C,unless otherwise specified.) PARAMETER Reverse Breakdown Voltage (Note 1) SYMBOL V(BR)R TEST CONDITIONS IR=0.5mA IF=5A, TJ=25°C Forward Voltage Drop VFM IF=5A, TJ=125°C VR=100V, TJ=25°C Leakage Current (Note 1) IRM VR=100V, TJ=125°C Notes: 1. Short duration pulse test used to minimize self-heating effect. 2. Thermal resistance junction to case mounted on heatsink. 3. Mounted on an FR4 PCB, single-sided copper, with 100 cm2 copper pad area. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 100 TYP MAX UNIT V 0.80 V 0.75 V 250 μA 25 mA 3 of 4 QW-R204-039.d MGBR5L100 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R204-039.d