LH1540ACD, LH1540ACDTR Datasheet

LH1540ACD, LH1540ACDTR
www.vishay.com
Vishay Semiconductors
1 Form A SOP Solid-State Relay
FEATURES
• High-speed operation
S'
S
• Isolation test voltage 2500 VRMS
NC
heat sink
S
8
• Current-limit protection
S'
• High surge capability
5
S
• Clean, bounce-free switching
S
• Extremely low power consumption
i179047
• High-reliability monolithic detector
1
2
3
• Surface-mountable
4
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
APPLICATIONS
DESCRIPTION
• PCMCIA type 2 cards
The LH1540 relay is an SPST normally open switch
(1 form A) in small-outline packages (SOP). It requires a
minimal amount of LED drive current to operate, making
them ideal for battery powered and power consumption
sensitive applications.
• Battery powered switch applications
• General telecom switching
• Telephone line interface
- On/off hook
- Ring relay
- Ground start
The relays are constructed using a GaAlAs LED for
actuation control and an integrated monolithic die for the
switch output. The die, fabricated in a high-voltage
dielectrically isolated BCDMOS technology, is comprised of
a photodiode array, switch-control circuitry, and MOSFET
switches. In addition, the relays employ current-limiting
circuitry enabling it to pass lightning surge testing as per
ANSI/TIA-968-B and other regulatory surge requirements
when overvoltage protection is provided.
• Programmable controllers
• Instrumentation
AGENCY APPROVALS
UL1577: file no. E52744 system code S
CSA:
certification 093751
DIN EN: 60747-5-2 (VDE 0884)/60747-5-5 (pending),
available with option 1
FIMKO: approval
ORDERING INFORMATION
SOP-#
L
H
1
5
PART NUMBER
4
0
A
C
ELECTR.
VARIATION
PACKAGE
PACKAGE
CONFIG.
T
R
TAPE AND
REEL
8.4 mm
UL, CSA, FIMKO
SOP-8, tubes
LH1540ACD
SOP-8, tape and reel
Rev. 1.7, 25-Jul-11
D
LH1540ACDTR
1
Document Number: 83843
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LH1540ACD, LH1540ACDTR
www.vishay.com
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
LED input ratings: continuous forward current
IF
50
mA
LED input ratings: reverse voltage
VR
5
V
VL
350
V
IL
110
mA
INPUT
OUTPUT
Output operation: DC or peak ac load voltage
IL  50 μA
Continuous DC load current: one pole
operating
SSR
Ambient operating temperature range
Tamb
- 40 to + 85
°C
Storage temperature range
Tstg
- 55 to + 150
°C
Tsld
260
°C
Input/output isolation voltage
VISO
2500
VRMS
Power dissipation
Pdiss
550
mW
Thermal resistance, junction to ambient
Rthja
200
C/W
Pin soldering temperature
t = 5 s max
Note
• Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
Maximum Ratings for extended periods of time can adversely affect reliability.
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
LED forward current for switch
turn-on
IL = 100 mA, t = 10 ms
IFon
0.6
1
mA
LED forward current for switch
turn-off
VL = ± 300 V, t = 100 ms
IFoff
0.001
0.1
IF = 1.5 mA
VF
0.80
1.15
1.40
V
IF = 1.5 mA, IL = ± 50 mA
RON
12
18
25

IF = 1.5 mA, t = 5 ms,
VL = 7 V
ILMT
170
210
270
mA
0.7
200
nA
1
A
INPUT
LED forward voltage
mA
OUTPUT
On-resistance: pin 5 (±) to 8 (±)
Current limit
Output off-state leakage current
IF = 0 mA, VL = ± 100 V
IF = 0 mA, VL = ± 350 V
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluations. Typical values are for information only and are not part of the testing requirements.
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Turn-on time
Turn-off time
TEST CONDITION
SYMBOL
IF = 1.5 mA, IL = 50 mA
ton
MIN.
TYP.
0.6
MAX.
UNIT
IF = 5 mA, IL = 50 mA
ton
0.3
1
ms
IF = 1.5 mA, IL = 50 mA
toff
0.7
IF = 5 mA, IL = 50 mA
toff
0.7
1.2
ms
TYP.
MAX.
UNIT
20
mA
ms
ms
RECOMMENDED OPERATING CONDITIONS
PARAMETER
LED forward current for switch
turn-on
Rev. 1.7, 25-Jul-11
TEST CONDITION
SYMBOL
MIN.
Tamb = - 40 °C to + 85 °C
IFon
1.5
2
Document Number: 83843
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
LH1540ACD, LH1540ACDTR
www.vishay.com
Vishay Semiconductors
FUNCTIONAL DESCRIPTION
Figure 1 shows the switch characteristics of the relays. The
relay exhibits an on-resistance that is exceptionally linear
through the origin and up to the knee current (IK). Beyond IK,
the incremental resistance decreases, minimizing internal
power dissipation. Overload currents are clamped at ILMT by
the internal current-limit circuitry. The current-limiting
circuitry exhibits a negative temperature coefficient, thereby
reducing the current- limit value when relay temperature is
increased. An extended clamp condition, which increases
relay temperature, decreases the current-limit value,
resulting in a current fold back characteristic. When the
overload is removed, the relay resumes its normal
on-resistance characteristic.
+I
210 mA
ILMT
10 Ω
IK
60 mA
16 Ω
- 1.5 V
-V
16 Ω
1.5 V
+V
60 mA
IK
10 Ω
ILMT
- 210 mA
-I
ilh1540acd_01
Fig. 1 - Typical AC/DC on Characteristics
In a 1 form A relay, to turn the relay on, forward current is
applied to the LED. The amount of current applied
determines the amount of light produced for the photodiode
array. This photodiode array develops a drive voltage for the
MOSFET switch outputs. For high temperature or high-load
current operations, more LED current is required.
PACKAGE DIMENSIONS in millimeters
8.53 ± 0.25
7.39 ± 0.25
0.38 ± 0.05
ISO method A
0.93 ± 0.05
1.07 ref.
40°
3.62
1.88
0° to 10°
10°
1.09
0.84
0.15 typ.
10°
Pin 1 I.D.
0.000
0.005
10°
5.84
5.59
1.27 typ.
10°
0.41 typ.
1
8
2
7
3
6
4
5
lead
coplanarity
0.08 max.
5.72
5.46
i178023
PACKAGE MARKING (example)
LH1540
V YWW S 68
Note
• Tape and reel suffix (TR) is not part of the package marking.
Rev. 1.7, 25-Jul-11
3
Document Number: 83843
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000