UNISONIC TECHNOLOGIES CO., LTD SBL1060 Preliminary DIODE 10A SCHOTTKY BARRIER RECTIFIER DESCRIPTION The UTC SBL1060 is a schottky barrier rectifier, it uses UTC’s advanced technology to provide customers with low forward voltage drop and high efficiency, etc. The UTC SBL1060 is suitable for use in free wheeling diodes, high frequency switch power supply and polarity protection applications. FEATURES * Low forward voltage drop * Low power loss * High efficiency * High reliability SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free SBL1060L-TA3-T SBL1060G-TA3-T Note: Pin Assignment: A: Athode K: Cathode Package TO-220 Pin Assignment 1 2 3 A K A Packing Tube MARKING www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 3 QW-R202-024.a SBL1060 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VR 60 V Working Peak Reverse Voltage VRWM 60 V Peak Repetitive Reverse Voltage VRRM 60 V RMS Reverse Voltage VR(RMS) 42 V Average Forward Rectified Current IO 10 A Peak Forward Surge Current 8.3ms Single Half IFSM 250 A Sine-Wave Superimposed on Rated Load Per Diode Operating Junction Temperature TJ -65~+150 °C Storage Temperature TSTG -65~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS (TA =25°C, unless otherwise noted.) PARAMETER Junction to Ambient Junction to Case SYMBOL θJA θJC RATINGS 62.5 3.5 UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS (Note 1) (TA =25°C, unless otherwise noted.) PARAMETER Instantaneous Forward Voltage SYMBOL VF Instantaneous Reverse Current at Rated DC Blocking Voltage Per Diode IR TEST CONDITIONS IF=10A, TC=25°C TC=25°C TC=100°C Junction Capacitance (Note 2) CJ Notes: 1. Thermal resistance junction to case mounted on heatsink. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP 700 MAX UNIT 0.75 V 1.0 mA 50 mA pF 2 of 3 QW-R202-024.a SBL1060 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R202-024.a