LH1526AB, LH1526AAC, LH1526AACTR www.vishay.com Vishay Semiconductors Dual 1 Form A Solid-State Relay FEATURES DIP S1 S2 SMD • Dual channel 1 form A • Extremely low operating current S1' • • • • • • • • • • S2' S1 S1' S2 7 6 8 S2' 5 i179034_2 1 2 3 4 High speed operation Isolation test voltage 5300 VRMS Current limit protection High surge capability DC only option Clean bounce free switching Low power consumption High reliability monolithic receptor Surface mountable Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC APPLICATIONS DESCRIPTION • General telecom switching - Telephone line interface - On/off hook - Ring relay - Break switch - Ground start • Battery powered switch applications • Industrial controls - Microprocessor control of solenoids, lights, motors, heaters, etc. • Instrumentation The LH1526 relay are two SPST normally open switches that can replace electromechanical relays in many applications. The relays require a minimal amount of LED drive current to operate, making it ideal for battery powered and power consumption sensitive applications. The relay is constructed using a GaAIAs LED for actuation control and an integrated monolithic die for the switch output. The die is, fabricated in a high-voltage dielectrically isolated technology, comprised of a photodiode array, switch-control circuitry, and MOSFET switches. In addition, the relay employs current-limiting circuitry, enabling it to pass lightning surge testing as per ANSI/TIA-968-B and other regulatory surge requirements when overvoltage protection is provided. The relay can be configured for AC/DC or DC-only operation. Note • See “solid-state relays” (application note 56) AGENCY APPROVALS UL1577: file no. E52744 system code H, double protection CSA: certification no. 093751 BSI/BABT: certification no. 7980 FIMKO: 25419 ORDERING INFORMATION L H 1 5 PART NUMBER 2 6 A # ELECTR. VARIATION PACKAGE # PACKAGE CONFIG. T TAPE AND REEL 7.62 mm SMD > 0.1 mm UL, CSA, BSI, FIMKO SMD-8, tubes LH1526AAC SMD-8, tape and reel LH1526AACTR DIP-8, tubes Rev. 1.9, 25-Jul-11 DIP R LH1526AB 1 Document Number: 83825 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LH1526AB, LH1526AAC, LH1526AACTR www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT LED input ratings: continuous forward current IF 50 mA LED input ratings: reverse voltage VR 8 V INPUT OUTPUT IL 50 μA Output operation: DC or peak AC load voltage VL 400 V Continuous DC load current, one pole operation IL 125 mA Continuous DC load current, two poles operation IL 100 mA °C SSR Ambient operating temperature range Tamb - 40 to + 85 Storage temperature range Tstg - 40 to + 150 °C Tsld 260 °C VISO 5300 VRMS Pdiss 600 mW Pin soldering temperature (1) Input to output isolation test voltage t = 10 s max. t = 1 s, IISO = 10 μA max. Power dissipation Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT 0.3 0.5 mA INPUT LED forward current, switch turn-on IL = 70 mA, t = 10 ms IFon LED forward current, switch turn-off VL = ± 350 V, t = 100 ms IFoff 0.001 0.1 IF = 1.5 mA VF 0.80 1.15 1.40 IF = 1.5 mA, IL = ± 50 mA RON 17 25 36 IF = 0 mA, VL = ± 100 V ROFF IF = 1.5 mA, t = 5 ms, VL = ± 7 V ILMT IF = 0 mA, VL = ± 100 V IO IF = 0 mA, VL = ± 400 V IO LED forward voltage mA V OUTPUT On-resistance: AC/DC, each pole Off-resistance Current limit Off-state leakage current Output capacitance Switch offset 5000 170 G 210 270 0.04 200 mA nA 1 μA IF = 0 mA, VL = 1 V CO 37 IF = 0 mA, VL = 50 V CO 13 pF IF = 5 mA VOS 0.25 μV VISO = 1 V CIO 0.8 pF pF TRANSFER Capacitance (input to output) Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Turn-on time Turn-off time Rev. 1.9, 25-Jul-11 TEST CONDITION SYMBOL IF = 1.5 mA, IL = 50 mA ton MIN. 1 IF = 5 mA, IL = 50 mA ton 0.5 IF = 1.5 mA, IL = 50 mA toff 0.2 IF = 5 mA, IL = 50 mA toff 1.1 2 TYP. MAX. UNIT ms 1 ms ms 1.5 ms Document Number: 83825 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LH1526AB, LH1526AAC, LH1526AACTR www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 50 Change in On-resistance (%) Normalized to 25 °C 120 Load Current (mA) 100 80 60 IFon = 5 to 10 mA 40 IFon = 2 mA IFon = 1 mA 20 0 - 40 17333 IFon = 0.5 mA IFon = 0.3 mA - 20 0 20 40 60 Ambient Temperature (°C) LED Forward Voltage (V) LED Forward Voltage (V) IF = 50 mA 1.3 1.2 IF = 1 mA 1.1 IF = 2 mA - 20 IF = 5 mA IF = 10 mA 0 20 40 60 Ambient Temperature, TA (°C) - 20 0 20 40 60 80 Ambient Temperature, TA (°C) 1.10 1.00 0.90 0.80 - 20 0 20 40 60 80 Ambient Temperature, TA (°C) Fig. 5 - LED Dropout Voltage vs. Temperature 40 Change in Current Limit (%) Normalized to 25 °C LED Forward Current for Switch Turn-on (%), Norm. to 25 °C - 30 ilh1526ab_04 1300 IL = 100 mA 900 700 500 300 100 - 20 0 20 40 60 IF = 5 mA, t = 5 ms 30 20 10 0 - 10 - 20 - 30 - 40 - 40 80 ilh1526ab_05 Ambient Temperature (°C) - 20 0 20 40 60 80 Ambient Temperature, TA (°C) Fig. 6 - Current Limit vs. Temperature Fig. 3 - LED Current for Switch Turn-on vs. Temperature Rev. 1.9, 25-Jul-11 - 20 0.70 - 40 80 Fig. 2 - LED Voltage vs. Temperature 17332 0 - 10 Fig. 4 - On-Resistance vs. Temperature IF = 20 mA 1.4 - 100 - 40 10 1.20 1.5 1100 20 ilh1526ab_03 1.6 ilh1526ab_01 30 - 40 - 40 80 Fig. 1 - Recommended Operating Conditions 1.0 - 40 IL = 50 mA 40 3 Document Number: 83825 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LH1526AB, LH1526AAC, LH1526AACTR Vishay Semiconductors 9 3.5 Off-State Leakage Current (nA) AC/DC On-resistance Variation (%) Normalized to Datasheet RON Specification at IF = 5 mA www.vishay.com 8 7 6 5 4 3 2 1 0 0.0 ilh1526ab_06 1.0 2.0 3.0 4.0 2.0 1.5 70 °C 1.0 50 °C 0.5 0.0 0 LED Forward Current (mA) 50 100 150 200 250 300 350 400 Load Voltage (V) ilh1526ab_09 Fig. 10 - Leakage Current vs. Applied Voltage at Elevated Temperatures 70 0.6 RL = 600 Ω 60 0.5 Insertion Loss (dB) Capacitance (pF) 85 °C 2.5 5.0 Fig. 7 - Variation in On-Resistance vs. LED Current 50 40 30 20 0.4 0.3 0.2 0.1 10 0 0 ilh1526ab_07 20 40 60 80 0.0 102 100 103 ilh1526ab_10 Applied Voltage (V) 104 105 Frequency (Hz) Fig. 11 - Insertion Loss vs. Frequency Fig. 8 - Switch Capacitance vs. Applied Voltage 100 Off-State Leakage Current (pA) 100 VP = 10 V RL = 50 Ω 80 Isolation (dB) 3.0 60 40 20 0 102 ilh1526ab_08 103 104 105 106 107 IF = 0 mA 80 70 60 50 40 30 20 10 0 0 Frequency (Hz) 50 100 150 200 250 300 350 400 ilh1526ab_11 Load Voltage (V) Fig. 12 - Leakage Current vs. Applied Voltage Fig. 9 - Output Isolation Rev. 1.9, 25-Jul-11 90 4 Document Number: 83825 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LH1526AB, LH1526AAC, LH1526AACTR Vishay Semiconductors 3.0 8 6 Turn-on Time (ms) Change in Breakdown Voltage (%) Normalized to 25 °C www.vishay.com 4 2 0 -2 -4 85 °C 25 °C - 40°C 1.2 0.6 0.0 -8 - 40 - 20 0 20 40 60 0 80 ilh1526ab_15 Ambient Temperature, TA (°C) Fig. 13 - Switch Breakdown Voltage vs. Temperature 15 Change in Turn-off Time (%) Normalized to 25 °C IF = 5 mA 4 3 2 1 ilh1526ab_13 30 40 50 60 70 80 90 Ambient Temperature, TA (°C) 16 20 5 0 -5 - 10 ilh1526ab_17 Fig. 14 - Switch Offset Voltage vs. Temperature - 20 0 20 40 60 80 Ambient Temperature, TA (°C) Fig. 17 - Turn-off Time vs. Temperature 60 3.0 IF= 5 mA IL = 50 mA 50 12 8 IF = 5 mA IL = 50 mA 10 - 15 - 40 0 20 4 LED Forward Current (mA) Fig. 16 - Turn-on Time vs. LED Current 5 Switch Offset Voltage (µV) 1.8 -6 ilh1526ab_12 85 °C 2.4 40 30 Turn-off Time (ms) Change in Turn-on Time (%) Normalized to 25 °C 2.4 20 10 0 - 10 - 20 25 °C 1.8 1.2 - 40 °C 0.6 - 30 - 40 - 40 ilh1526ab_14 0.0 - 20 0 20 40 60 80 0 Ambient Temperature, TA (°C) ilh1526ab_18 Fig. 15 - Turn-on Time vs. Temperature Rev. 1.9, 25-Jul-11 4 8 12 16 20 LED Forward Current (mA) Fig. 18 - Turn-off Time vs. LED Current 5 Document Number: 83825 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LH1526AB, LH1526AAC, LH1526AACTR www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters DIP pin one ID 4 3 2 1 5 6 7 8 6.81 6.48 ISO method A 9.91 9.63 1.14 0.76 7.62 typ. 0.79 4° typ. 3.81 3.30 1.27 6.35 5.84 10° 0.89 0.51 0.56 0.46 3° to 9° 0.30 0.20 2.54 typ. 3.30 2.79 i178008 SMD pin one ID 0.76 6.81 6.48 R 0.25 2.54 1.78 8 min. 11.05 9.91 9.63 10.03 9.52 0.79 typ. ISO method A 1.14 0.78 1.52 3.81 3.30 radius 7.80 7.52 3° to 7° 4° typ. 10° 0.25 0.10 8 typ. 1.02 0.51 1.27 typ. 2.54 typ. i178009 0.3 typ. PACKAGE MARKING (example) LH1526 V YWW H 68 Note • Tape and reel suffix (TR) is not part of the package marking. Rev. 1.9, 25-Jul-11 6 Document Number: 83825 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000