PC FILE NAME: PDP-30 1.0 0.039 1 COPYRIGHT 2008 BY CUI INC. SCALE: 1:2 2 3 1.5 0.059 (2 PLCS) 50.0 1.969 1.0 19.5 0.768 24.3 0.957 OUTER HOOD METAL SLEEVE CLAMP PIN/BODY PLASTIC RING METAL COVER SPRING INNER HOOD STRAIN RELIEF ABS Brass Brass Brass/PBT POM Brass Steel ABS PVC MATERIAL Nickel Nickel Nickel Silver PLATING SPECIFICATIONS: RATING: PINS 1&2: 20V DC @ 7.5A PIN 3: 20V DC @ 1A INSULATION RESISTANCE: 50M OHMS MIN: 250V DC VOLTAGE WITHSTAND: 250V AC R.M.S. FOR 1 MINUTE LIFE: 5,000 CYCLES 12.0 0.472 10.0 0.394 14.0 0.551 0.2 10.8 0.425 6.0 0.236 0.5 36.0 1.417 0.5 REV. A ZRJ DRAWN BY: PDP-30 APPROVED BY: 3-PIN POWER DIN PLUG PART NO. TITLE: UNITS: 20050 SW 112th Ave. Tualatin, OR 97062 Phone: 503-612-2300 800-275-4899 Fax: 503-612-2383 Website: www.cui.com TOLERANCE: ±0.2mm UNLESS OTHERWISE SPECIFIED 7.8 0.307 6.5 0.256 DESCRIPTION NEW DRAWING A 2:1 SCALE: MM [INCHES] REV: RoHS DATE 12/1/2008 For more information, please visit the product page. 2 outer hood 3 metal sleeve 4 clamp 5 pin body PC FILE NAME: plastic ring PDP-30 6 7 metal cover 8 spring 9 inner hood COPYRIGHT 2008 BY CUI INC. strain relief 1 1 2 3 6 4 5 7 ZRJ DRAWN BY: PDP-30 APPROVED BY: 3-PIN POWER DIN PLUG PART NO. TITLE: 8 UNITS: A 1:1 SCALE: MM [INCHES] REV: 9 For more information, please visit the product page. PC FILE NAME: PDP-30 2 5 4 COPYRIGHT 2008 BY CUI INC. 4 7 8 9 ZRJ DRAWN BY: PDP-30 APPROVED BY: 3-PIN POWER DIN PLUG PART NO. TITLE: UNITS: REV: A 1:1 SCALE: MM [INCHES] STEP 3 push pin body (4) and plastic ring (5) into metal sleeve (2) STEP 2 solder wires to contacts on pin body (4) STEP 1 insert strain relief (9), inner hood (8), and spring (7) onto cable For more information, please visit the product page. PC FILE NAME: PDP-30 1 5 6 3 COPYRIGHT 2008 BY CUI INC. 2 7 8 8 9 9 ZRJ DRAWN BY: PDP-30 APPROVED BY: 3-PIN POWER DIN PLUG PART NO. TITLE: UNITS: REV: A 1:1 SCALE: MM [INCHES] STEP 6 push outer hood (1) and inner hood/ strain relief (8,9) together STEP 5 push spring (7) up to plastic ring (5), assemble inner hood (8) and strain relief (9) together STEP 4 crimp the clamp (3) onto wires, assemble metal cover (6) onto metal sleeve (2) For more information, please visit the product page.