LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only RGB Power Light LED LGXRGB-501E-SI DATA SHEET DOC. NO : QW0905- LGXRGB-501E-SI REV : B DATE : 26 - Sep. - 2012 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Typical Applications Features *. Three chip(color) in one package for High Flux LED. *. Various colors for choice. *. More Energy Efficient than lncandescent and most Halogen lamps. *. Low voltage DC operated.. *. Instant light(less than 100 ns). *. Independent control of each color. *. LCD Backlights / Light Guides. *. Commercial and Residential Architectural lighting. *. Mini-accent / Uplighters / Downlighters / Orientation lighting *. Fiber Optic Alternative / Decorative / Entertainment lighting. *. Security / Garden lighting. *. Sign and channel Letter. *. No UV. *. IR reflow process compatible. Dimension 9.20±0.3 8.0±0.3 1.8 +1 6 - +2 5 - +3 4 - Cathode Mark 1.5 1.3 2.5 5.5 10.07±0.3 11.6±0.3 3.3 14.6±0.3 (Bottom) R A 1 6 K 1. Anode Red 2. Anode Green 3. Anode Blue 4. Cathode Blue 5. Cathode Green 6. Cathode Red G A 2 5 K B A 3 4 K Note:1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted 2.Specifications are subject to change without notice Page 1/9 Heat Sink LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Absolute Maximum Ratings at Ta=25 ℃ Ratings Symbol Parameter UNIT White IF 350 mA Total Power Dissipation PD 3.92 W Peak pulse current Duty 1/10@10KHz IFP 500 mA LED junction Temperature Tj 125 ℃ Reverse Current(VR=5V) Ir 100 μA Storage Temperature Tstg -40 ~ +120 ℃ Operating Temperature Topr -40 ~ +100 ℃ Manual Soldering Time at 260° C(Max) Tsol 5 seconds DC Forward Current for each color . Luminous Flux Characteristics at 350mA (Ratings At 25℃ Ambient) PART NO LGXRGB-501E/SI Luminous Flux @350mA(lm) Emission Color Units Min. Typ. Max. Red 18.1 22.3 39.8 Green 30.6 44.1 67.2 Blue 18.1 22.3 39.8 Page 2/9 lm LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only . Forward Voltage Characteristics at 350mA (Ratings At 25℃ Ambient) PART NO LGXRGB-501E-SI Vf Emission Color Min. Typ. Max. Red 2.0 2.5 3.2 Green 3.0 3.6 4.0 Blue 3.0 3.6 4.0 Units V Note : Forward Voltage is measured with an accuracy of±0.1V . Dominant Wavelength Characteristics at 350mA (Ratings At 25℃ Ambient ) PART NO LGXRGB-501E-SI Emission Color λD Units Min. Typ. Max. Red 619 ---- 629 Green 522 ---- 531 Blue 450 ---- 465 nm . Temperature Coefficient Of Forward Voltage&Thermal Resistance Junction To Board Characteristics at 350mA (Ratings At 25℃ Ambient ) PART NO Emission Color VF/ T Typ. Units Rth,j-B Typ. Units Red LGXRGB-501E-SI Green -2 mV/°C 18 ° C/W Blue . View Angle Characteristics at 350mA (Ratings At 25℃ Ambient ) PART NO Emission Color Lambertian Units 120 Degrees Red LGXRGB-501E-SI Green Blue Page 3/9 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Brightness Code For High Power LED Group R G B Luminous flux(lm) Min Max F19 18.1 23.5 F20 23.5 30.6 F21 30.6 39.8 F21 30.6 39.8 F22 39.8 51.2 F23 51.2 67.2 F19 18.1 23.5 F20 23.5 30.6 F21 30.6 39.8 Note : Flux is measured with an accuracy of ±10% Dominant Wavelength For High Power LED λD (nm) Group R G B Min Max All 619 629 C 522 525 D 525 528 E 528 531 A 450 455 B 455 460 C 460 465 Page 4/9 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Recommended Soldering Conditions Soldering Conditions: The LEDs can soldered in place using the reflow soldering method. Reflow Soldering (Lead-free Soder) Pre-heat Pre-heat time Peak temperature Soldering time Condition Hand Soldering 180 ~ 200 ° C 120sec. Max. 260° C Max. Temperature Soldering Time ≦ 260℃ 5 sec Max one time only. 10 sec. Max. refer to Temperature - profile PB-Free Reflow Solder 1~5°C/sec Preheat 180~200 ° C 1~5° C/sec 260°C MaX. 5sec.Max Above 220 °C 60 sec.Max. 120 sec.Max. Reflow Soldering should not be done more than two times. Page 5/9 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Fig.1 Forward current vs. Forward Voltage 400 Forward Current(mA) B R 300 G 200 100 0 2.0 2.5 3.0 3.5 4.0 4.5 Forward Voltage(V) Fig.2 Operating current vs. Ambient Temperature Forward Current(mA) 400 300 200 100 50 0 Rth(J-A)=30C/W Rth(J-A)=25C/W Rth(J-A)=20C/W Rth(J-A)=15C/W 25 50 75 100 Ambient Temperature( ° C) Page 6/9 125 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Fig.3 Forward current vs. Luminous Flux Relative Luminous Flux( %) 1.2 1.0 0.8 0.6 0.4 0.2 0 100 300 200 400 500 IF(mA) Fig.4 Junction Temperature vs. Forward Voltage 2.0 Relative Flux(%) 1.8 1.6 R 1.4 1.2 B 1.0 G 0.8 0.6 0.4 0.2 -20 0 20 40 60 80 Junction Temperature( ° C) Page 7/9 100 120 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Fig.5 Luminous Spectrum(Ta=25 ℃) Relative Luminous Flux SPECTRAL RADIANCE 1.0 G B R 0.5 0 400 450 500 550 600 650 700 Wavelength (nm) Fig.6 Directivity Radiation 0° -30° Red 30° Blue -60° 100% 75% 50% 60° Green 25% Page 8/9 0 25% 50% 75% 100% LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Reliability Test Item Description Stress Condition Test Duration RTOL Room Temperature Operation Life 25°C, Max. IF 1000 hours WHT Wet High Temperature 85° C/85%RH 1000 hours TC Temperature Cycling -40/+110°C, 30min dwell,<5min trans. 200 cycles TS Thermal Shock -40/+110°C, 20min dwell,<20min trans. 200 cycles HTSL High Temperature Storage Life 120° C 1000 hours LTSL Low Temperature Storage Life -40° C 1000 hours SHR Solder Heat Resistance 260±5° C, 5secs MS Mechanical Shock 1500G,0.5msec pulse, 5 shocks each 6 axis ND Natural Drop On concrete from 1.2m, 3xtimes RV Random Vibration 6G RMS from 10 to 2KHz, 10mins/axis VVF Variable Vibration Frequency 10-2000-10Hz, 20G 1 min, 1.5mm, 3timesx/axis Note : Failure criteria: Electrical failures VF shife >= 10% IR < 50uA@Vr = 5v Ligitek output Degradation %Iv shift >= 30%@1000hrs or 200cycle Visual failures Broken or damaged pockage or lead Dimension out of tolerance Page 9/9