For more information, please visit the product page. rev. page 1 of 3 date 01/08/2008 DESCRIPTION: sine wave PART NUMBER: SES10 ELECTRICAL SPECIFICATIONS output waveform output signals current consumption frequency response output phase difference supply voltage output resolution (ppr) Sine Wave A phase, A,B phase ≤30 mA (LED: maximum 20mA) 0~20 KHz A, B phase difference 90° ± 45° 5 V dc ± 10% 100, 200 MECHANICAL SPECIFICATIONS max shaft load, radial: axial: starting torque max rotational speed shock resistance vibration proof weight cable 1.9N (200gf) 1.9N (200gf) 0.3 x 10-3 N·m (3 gf·cm) 6000 RPM 500m/s2 (about 50G) 3 times each on XYZ 55 Hz, double amplitude 1.5mm, 2 hours each on XYZ 10g (with 130mm cable) Vinyl wire (AWG 30) 130mm ENVIRONMENTAL SPECIFICATIONS operating temp storage temp humidity 0° to +50° C -20° to +80° C 90% max. non collecting ORDERING INSTRUCTIONS SES10 - XXXXX Resolution (PPR): 100 = 100 PPR 200 = 200 PPR Output Phase: A = Single Phase AB = Two-Phase 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2383 For more information, please visit the product page. rev. DESCRIPTION: sine wave PART NUMBER: SES10 CIRCUIT CONNECTIONS 270Ω +5V RED Collector BROWN 200Ω ~3kΩ A/B out 0V A=WHITE B=GREEN BLACK OUTPUT WAVEFORM Clockwise rotation viewed from front 1Vpp T T ± T 4 8 20050 SW 112th Ave. Tualatin, Oregon 97062 phone 503.612.2300 fax 503.612.2383 page 2 of 3 date 01/08/2008 PC FILE NAME: SES 10 13.0 0.512 COPYRIGHT 2007 BY CUI INC. Cable Color Output Type Green Black Red Brown White Anode Collector Emitter A Emitter B Cathode 10.0 0.394 10.0 0.394 13.0 0.512 Cable length 130 - - 8.0 0.315 2-M2 Depth 3 REV. A - JMS DRAWN BY: SES 10 APPROVED BY: Incremental Encoder PART NO. TITLE: UNITS: 20050 SW 112th Ave. Tualatin, OR 97062 Phone: 503-612-2300 800-275-4899 Fax: 503-612-2383 Website: www.cui.com TOLERANCE: ±0.3mm UNLESS OTHERWISE SPECIFIED DESCRIPTION NEW DRAWING A 2:1 SCALE: MM [INCHES] REV: RoHS DATE 7/27/2007 For more information, please visit the product page.