Tlam OptoTECTM Series OT20,12,F0T,0406 Thermoelectric Module The Tlam OptoTEC™ Series is a miniature thermoelectric module (TEM) that uses a thermally conductive dielectric with copper exteriors as substrates. This product line has improved heat spreading, higher mechanical integrity and can provide cost savings over standard ceramic based TEMs with similar form factors in high volume. This product series has been created for applications to stabilize the temperature of sensitive optical components in telecom, photonics, medical and consumer markets. This product line is available in multiple configurations and surface finishing options. The Tlam OptoTEC™ Series is designed for lower current and lower heat-pumping applications and are easily customizatable to accomodate alternate sizes, heat pumping capacities, pretinning, unique circuit patterns, or solder posts, however MOQ applies. FEATURES APPLICATIONS • High Heat Spreading • Robust Mechanical Design • Precise Temperature Control • No Sound or Vibration • Cost Savings in High Volume • Laser Diodes • Consumer Medical Lasers • Optical Transceivers • Pump Lasers • Crystal Oscillators • Flexible Customization PERFORMANCE SPECIFICATIONS Hot side temperature (°C) 25 50 Qmax (watts) 1.6 1.8 Delta Tmax (°C) 67 77 Imax (amps) 2.0 2.0 Vmax (volts) 1.4 1.6 Module resistance (ohms) 0.63 0.71 Passed Telcordia GR-468-CORE Issue 2 Reliability Testing SUFFIX THICKNESS FLATNESS & (PRIOR TO TINNING) PARALLELISM HOT FACE COLD FACE LEAD LENGTH 22 0.104” +/- 0.005” NA / NA Pre-tinned Pre-tinned 2.0” GG 0.104” +/- 0.005” NA / NA Au Plated Au Plated 2.0” SEALING OPTION Americas: +1 888.246.9050 Europe: +46.31.704.67.57 Asia: +86.755.2714.1166 [email protected] www.lairdtech.com SUFFIX SEALANT COLOR TEMP RANGE DESCRIPTION RT RTV White -60 to 204 °C Non-corrosive, silicone adhesive sealant EP Epoxy Black -55 to 150 °C Low density syntactic foam epoxy encapsulant PERFORMANCE CURVES 0.6 Voltage (V) 1.2 0.9 1.8 2.0 1.6 1.2 0.8 0.4 1.5 1.2 0.9 0.6 0.3 0.3 0.0 80 70 60 50 40 30 20 10 0 Delta T (C) Qc (W) 1.5 0.0 80 70 60 50 40 30 20 10 0 Delta T (C) MECHANICAL DRAWING Solder Construction: 138°C BiSn Tlam Substrates OPERATING TIPS • Max operating temperature: 80°C • Do not exceed Imax or Vmax when operating module • Reference assembly guidelines for recommended installation • Solder tinning also available on Tlam substrates THR-DS-OT20,12,F0T,0406,11,W2.25 1013 Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2013 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.