For more information, please visit the product page | For information on related products, view External Power Supplies date 12/19/2012 page 1 of 3 SERIES: PJ-064X │ DESCRIPTION: DC POWER JACK FEATURES • mounting hardware includes nut and washer • panel mount • metal bushing RoHS PART NUMBER KEY PJ-064 X Base Number Center Pin Diameter A = ø2.0 mm B = ø2.5 mm SPECIFICATIONS parameter conditions/description min rated input voltage typ max 24 units Vdc rated input current 5 A contact resistance 30 mΩ 500 Vac insulation resistance at 500 Vdc voltage withstand for 1 minute 100 MΩ insertion/withdrawl force 0.2 3.0 kgf operating temperature -25 70 °C life 5,000 cycles SOLDERABILITY parameter conditions/description min typ max units hand soldering for 3~5 seconds at 295 300 305 °C wave soldering for 3~5 seconds at 245 250 255 °C cui.com For more information, please visit the product page | For information on related products, view External Power Supplies CUI Inc │ SERIES: PJ-064X │ DESCRIPTION: DC POWER JACK date 12/19/2012 │ page 2 of 3 MECHANICAL DRAWING units: mm[inches] TOLERANCE: ±0.3mm (unless otherwise specified) PLATING brass nickel terminal 1 brass silver terminal 2 phosphor bronze silver terminal 3 brass silver bushing brass nickel insulator red vulcanite fiber plastic PBT nut brass nickel washer steel nickel 11.00 0.433 0.10 5.70 0.224 0.10 refer to schematic 5/16X32W MATERIAL center pin 5.70 0.224 0.20 4.10 0.161 0.10 2.70 0.106 10.40 0.409 0.20 7.80 0.307 0.20 3.80 0.150 0.10 12.40 0.488 0.20 16.40 0.646 0.10 3 1.40 0.055 (3 PLCS) 0.10 3.80 0.150 2 1 3.50 0.138 3.80 0.150 2.80 0.110 (3 PLCS) 0.10 10.00 0.394 2.10 0.083 3.80 0.150 3.80 0.150 3.50 0.138 3 2 1.00X2.20 (3 PLCS) 1 PCB LAYOUT TOP VIEW 5/16x32W 1 3 2 Schematic 10.10 0.398 8.10 0.319 MATING PLUG Jack Insertion Depth: 8.4mm 0.30 0.012 cui.com Model Center Pin PJ-064A ø2.0 mm PJ-064B ø2.5 mm For more information, please visit the product page | For information on related products, view External Power Supplies CUI Inc │ SERIES: PJ-064X │ DESCRIPTION: DC POWER JACK date 12/19/2012 │ page 3 of 3 REVISION HISTORY rev. description date 1.0 initial release 08/03/2010 1.01 new template applied 06/14/2012 1.02 updated voltage and current rating 12/19/2012 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.