UNISONIC TECHNOLOGIES CO., LTD MBR0560 Preliminary DIODE 0.5 AMP SCHOTTKY RECTIFIER + DESCRIPTION - The UTC MBR0560 is a Schottky Rectifier with high current capacity, ultra low thermal resistance and low forward voltage. The UTC MBR0560 is suitable for surface mount applications. SOD-123 + FEATURES - * Ultra Low Thermal Resistance * High Current Capability * Low Forward Voltage SOD-123S ORDERING INFORMATION Ordering Number MBR0560G-CA2-R MBR0560G-CA2S-R Note: Pin Assignment: A: Anode K: Cathode Package SOD-123 SOD-123S Pin Assignment 1 2 K A K A Packing Tape Reel Tape Reel MBR0560G-CA2-R (1)Packing Type (1) R: Tape Reel (2)Package Type (2) CA2: SOD-123, CA2S: SOD-123S (3)Green Package (3) G: Halogen Free and Lead Free MARKING www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-036.b MBR0560 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS (TJ=25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Maximum Repetitive Peak Reverse Voltage VRRM 60 V Working Peak Reverse Voltage VRWM 60 V Maximum DC Blocking Voltage VR 60 V Average Rectified Output Current TC=125°C IO 0.5 A Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load IFSM 5.5 A (JEDEC Method) Operating Temperature TOPR -55 ~ +150 °C Storage Temperature TSTG -55 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL CHARACTERISTICS (PER LEG) PARAMETER SYMBOL SOT-123 Typical Thermal Resistance θJL SOT-123S Note: FR-4 PCB, 2 oz Copper. Minimum recommended pad layout. RATINGS 20 30 (Note) UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS (PER LEG) (TA=25°C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS Reverse Breakdown Voltage V(BR)R IR=0.50mA Forward Voltage Drop VFM IF=0.5A, TC=25°C Leakage Current IRM Rated DC Voltage, TC=25°C Junction Capacitance (Note 2) CJ Notes: 1. Pulse Test: Pulse width ≤ 300µs, Duty cycle ≤ 2%. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 60 TYP MAX UNIT V 0.7 V 200 μA 30 pF 2 of 3 QW-R601-036.b MBR0560 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-036.b