UNISONIC TECHNOLOGIES CO., LTD PYE01NBT-C0 LIGHT EMITTING DIODE YELLOW HIGH POWER LED FEATURES * Very long operating life * Energy efficient APPLICATIONS * Automotive exterior and interior lighting * Architectural lighting * Electronic signs and signals MECHANICAL DIMENSIONS Note:Dimensions shown in mm www.unisonic.com.tw Copyright © 2008 Unisonic Technologies Co., Ltd 1 of 4 QW-R125-018.A PYE01NBT-C0 LIGHT EMITTING DIODE ORDERING INFORMATION Ordering Number PYE01NBT-C0 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 4 QW-R125-018.A PYE01NBT-C0 LIGHT EMITTING DIODE ABSOLUTE MAXIMUM RATINGS (Ta=25℃) PARAMETER SYMBOL RATINGS UNIT DC Forward Current IF 350 mA Forward Pulse Current (Note1) IFP 500 mA Reverse Voltage VR 5 v Viewing Angle 2θ1/2 120 ° -40℃ ~ +80℃ ℃ Operation Temperature TOPR -40℃ ~ +80℃ ℃ Storage Temperature TSTG Note: 1. Pulse width 0.1msec max. Duty cycle1/10 2. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL CHARACTERISTICS PARAMETER Luminous Flux Forward Voltage Reverse Current Dominant Wavelength Viewing Angle SYMBOL LX VF IR λD 2θ1/2 TEST CONDITIONS IF=350mA IF=350mA VR=5V IF=350mA IF=350mA MIN 30 2.2 TYP 35 2.4 585 590 120 MAX UNIT lm V uA nm ° 2.6 10 595 RELIABILITY ITEMS AND CONDITIONS NO. 1 2 ITEMS Resistance to Soldering Heat Thermal Shock 7 8 9 Temperature Cycle Hi-Temp. Storage Low-Temp. Storage Hi-Temperature/ Hi-Humidity Test Operating Life Life Time 1 Life Time 2 10 ON/OFF Test 3 4 5 6 TEST CONDITIONS NOTE RESULT 260℃±5℃ 10Sec. Pass 50Cycles Pass 100Cycles Pass 100℃ 1000Hrs Pass -40℃ 1000Hrs Pass 60℃/90%RH 1000Hrs Pass IF =350mA 500mA@ROOM TEMP 350mA@--40℃ IF=700mA Pulse width 0.1msec max. Duty cycle1/10 1000Hrs 1000Hrs 1000Hrs Pass Pass Pass 100,000 Cycles Pass -20℃ ~ 100℃ 10Min. 5Sec. 10Min. -40℃ 25℃ 100℃ 30Min. 5Min. 30Min. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 4 QW-R125-018.A PYE01NBT-C0 Relative Intensity (%) Normalized Relative Luminous Fiux Normalized Spectral Intensity TYPICAL CHARACTERISTICS Current (mA) LIGHT EMITTING DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R125-018.A