UNISONIC TECHNOLOGIES CO., LTD UAD92 DIODE SILICON DIODE DESCRIPTION The UTC UAD92 is a silicon diode, it uses UTC’s advanced technology to provide customers with high average output current. FEATURES * Low VF * Super high speed switching SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free UAD92L-02-T47-T UAD92G-02-T47-T UAD92L-02-T3P-T UAD92G-02-T3P-T Package TO-247 TO-3P Pin Assignment 1 2 3 A K A A K A Packing Tube Tube UAD92L-02-T47-T (1)Packing Type (1) T: Tube (2)Package Type (2) T47: TO-247, T3P: TO-3P (3)VRRM (3) 02: 200V (4)Green Package (4)L: Lead Free, G: Halogen Free and Lead Free MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-078.F UAD92 DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified.) PARAMETER Repetitive Peak Reverse Voltage SYMBOL VRRM Average Output Current 50Hz Square Wave Per Leg (Note 1) Duty=1/2, TC=115°C Total RATINGS 200 10 IO UNIT V A 20 Non-Repetitive Forward Sine Wave, 10ms 1shot IFSM 100 A Surge Current (Note 2) Operating Junction Temperature TJ 150 °C Storage Temperature TSTG -40~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL RESISTANCE PARAMETER Junction to Case SYMBOL TO-247 TO-3P θJC RATINGS 1.5 1.45 UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS (TA =25°C, unless otherwise specified.) PARAMETER SYMBOL TEST CONDITIONS Forward Voltage (Note 2) VF IF=10A Reverse Current (Note 2) IR VR=VRRM Reverse Recovery Time (Note 2) trr IF=0.1A, IR=0.2A, Irec=0.05A Notes: 1. Out put current of center tap full wave connection. 2. Rating per element UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 0.95 V 200 μA 0.04 μs 2 of 3 QW-R601-078.F UAD92 DIODE TYPICAL CHARACTERISTICS Peak Repetitive Reverse Voltage 120 100 80 60 40 20 0 0 50 100 150 200 250 300 350 400 Peak Repetitive Reverse Voltage, VRRM (V) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-078.F