UNISONIC TECHNOLOGIES CO., LTD MGBR20U50 Preliminary DIODE MOS GATED BARRIER RECTIFIER DESCRIPTION The UTC MGBR20U50 is a surface mount mos gated barrier rectifier, it uses UTC’s advanced technology to provide customers with low forward voltage drop and high switching speed etc. The UTC MGBR20U50 suitable for supply applications. FEATURES * Ultra low forward voltage drop * High switching speed SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free MGBR20U50L-TA2-T MGBR20U50G-TA2-T MGBR20U50G-K08-5060-R Note: Pin Assignment: A: Anode K: Cathode MGBR20U50L-TA2-T Package TO-220-2 DFN-8(5×6) Pin Assignment 1 2 3 4 5 6 7 8 K A - - - - - A A A NC K K K K Packing Tube Tape Reel (1)Packing Type (1) T: Tube, R: Tape Reel (2)Package Type (2) TA2: TO-220-2, K08-5060: DFN-8(5×6) (3)Green Package (3) L: Lead Free, G: Halogen Free and Lead Free MARKING TO-220-2 www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd DFN-8(5×6) 1 of 3 QW-R601-132.b MGBR20U50 Preliminary DIODE ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise specified) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. PARAMETER SYMBOL RATINGS UNIT DC Blocking Voltage VRM 50 V Working Peak Reverse Voltage VRWM 50 V Peak Repetitive Reverse Voltage VRRM 50 V Average Rectified Forward Current IO 20 A (Rated VR-20Khz Square Wave) - 50% Duty Cycle Peak Forward Surge Current - 1/2 60hz IFSM 300 A Peak Repetitive Reverse Surge Current (2uS-1Khz) IRRM 2 A Maximum Rate of Voltage Change ( at Rated VR ) dv/dt 10000 V/μS Operating Junction Temperature TJ -65~+150 °C Storage Junction Temperature TSTG -65~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER Junction to Ambient SYMBOL TO-220-2 DFN-8(5×6) θJA RATINGS 60 72 UNIT °C/W ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise specified) PARAMETER Reverse Breakdown Voltage (Note 1) SYMBOL V(BR)R TEST CONDITIONS IR=0.50mA IF=20A, TJ=25°C Forward Voltage VFM IF=20A, TJ=125°C VR=50V, TJ=25°C Reverse Current (Note 1) IRM VR=50V, TJ=125°C Notes: 1. Short duration pulse test used to minimize self-heating effect. 2. Thermal resistance junction to case mounted on heatsink. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 50 TYP MAX UNIT V 0.48 V 0.43 V 500 µA 100 mA 2 of 3 QW-R601-132.b MGBR20U50 Preliminary DIODE UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-132.b