For more information, please visit the product page | For information on related products, view External Power Supplies date 08/30/2013 page 1 of 3 MODEL: PJ-006B-SMT │ DESCRIPTION: DC POWER JACK FEATURES • • • • 2.5mm center pin 4 A rating vertical orientation surface mount (SMT) RoHS SPECIFICATIONS parameter conditions/description min rated input voltage typ rated input current contact resistance1 between terminal and mating plug between terminal in a closed circuit insulation resistance at 500 Vdc voltage withstand at 50/60Hz for 1 minute any direction for 10 seconds -25 life A mΩ mΩ 500 Vac 3 kg 500 g 85 °C 5,000 flammability rating UL94V-0 RoHS 2011/65/EU Notes: 4 50 30 MΩ 0.3 operating temperature units Vdc 100 insertion/withdrawal force terminal strength max 18 cycles 1. When measured at a current of less than 1 A 2. Add suffix “-TR” to the model number for tape & reel packaging SOLDERABILITY parameter conditions/description reflow soldering see reflow profile min cui.com typ max units 260 265 °C For more information, please visit the product page | For information on related products, view External Power Supplies CUI Inc │ MODEL: PJ-006B-SMT │ DESCRIPTION: DC POWER JACK date 08/30/2013 │ page 2 of 3 MECHANICAL DRAWING units: mm[inches] tolerance: X.X ±0.3mm X.XX ±0.2mm 9.00 0.35 PLATING copper alloy nickel plated terminal 1 copper alloy silver plated terminal 2 copper alloy silver plated terminal 3 copper alloy silver plated plastic (housing) LCP plastic (bottom cover) PA10T 13.20 0.52 2.50 0.10 6.30 0.25 MATERIAL center pin R2.25 0.09 10.90 0.43 10.60 0.42 6.25 0.25 0.80 0.03 14.27 0.56 14.10 0.56 4.50 0.18 4.20 0.17 5.00X4.50 2.00 0.08 (2 PLCS) 3.85 0.15 1.25 0.05 1 3.10 0.12 1 9.00 0.35 4.50 0.18 2 3 4.55 0.18 6.25 0.25 2.25 0.09 4.50X4.90 (2 PLCS) 2.50 0.10 (2 PLCS) 1.25 0.05 4.75 0.19 4.80 0.19 3 2 2.65 0.10 5.0 0.20 PCB LAYOUT TOP VIEW 1 3 2 SCHEMATIC MATING PLUG Jack Insertion Depth: 8.95mm Note: All specifications measured at 5~35°C, humidity at 40~85%, under standard atmospheric pressure, unless otherwise noted. cui.com Model PJ-006B-SMT Center Pin Ø2.5 mm For more information, please visit the product page | For information on related products, view External Power Supplies CUI Inc │ MODEL: PJ-006B-SMT │ DESCRIPTION: DC POWER JACK date 08/30/2013 │ page 3 of 3 REVISION HISTORY rev. description date 1.0 initial release 12/12/2005 1.01 added missing dimensions 10/18/2007 1.02 housing material changed 02/09/2011 1.03 added TR package option 11/07/2012 applied new spec template, updated rating 08/30/2013 1.04 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.