Datasheet

For more information, please visit the product page
|
For information on related products, view External Power Supplies
date
05/09/2016
page
1 of 3
MODEL: PJ-068B-SMT │ DESCRIPTION: MID MOUNT DC POWER JACK
FEATURES
•mid mount for low profile applications
•fully shielded
•high current rating
RoHS
SPECIFICATIONS
parameter
conditions/description
min
typ
rated input voltage
rated input current
contact resistance1
between terminal and mating plug
between terminal in a closed circuit
insulation resistance
at 500 Vdc
voltage withstand
at 50/60Hz for 1 minute
5
A
50
30
mΩ
mΩ
MΩ
0.3
terminal strength
any direction for 10 seconds
operating temperature
-25
life
500
Vac
3
kg
500
g
85
°C
5,000
flammability rating
UL94V-0
RoHS
2011/65/EU
units
Vdc
100
insertion/withdrawal force
Notes:
max
24
cycles
1. When measured at a current of less than 100 mA / 1 kHz
2. Add suffix “-TR” to the model number for tape & reel packaging
SOLDERABILITY
parameter
conditions/description
min
typ
max
units
reflow soldering
see reflow profile
255
260
265
°C
270
260
250
240
217
180
120
120
60
50
°C
70
60
140
120
250
180
240
Time (second)
cui.com
340
300
380
360
430
420
480
For more information, please visit the product page
|
For information on related products, view External Power Supplies
CUI Inc │ MODEL: PJ-068B-SMT │ DESCRIPTION: MID MOUNT DC POWER JACK
date 05/09/2016 │ page 2 of 3
MECHANICAL DRAWING
units: mm[inches]
TOLERANCE:
X.X ±0.2mm
X.XX ±0.1mm
X.XXX ±0.05mm
SHIELD A
SHIELD B
MATERIAL
PLATING
cetner pin
brass
silver
terminal 1
brass
silver
terminal 2
copper alloy
silver
terminal 3
brass
silver
stopper
cold rolled steel
nickel
shield-A
brass
nickel
shield-B
stainless steel
plastic
PA6T
10.0 0.394
11.8 0.465
4.15 0.163
0.9 0.035
(4 PLCS)
STOPPER
9.1 0.358
2.3 0.091
(4 PLCS)
3.7 0.146
4.55 0.179
1.00 0.039
10.9 0.429
4.25 0.167
0.2
0.75 0.030
(2 PLCS)
4.25 0.167
0.2
5.90 0.232
11.1 0.437
13.8 0.543
9.7
1.00X2.40 (2 PLCS)
1.50X2.90 (2 PLCS)
1.20
1.60 0.063
(2 PLCS)
1.40 0.055
3.05
0.70X1.80
1.20X2.30
2
2
1.90
6.05
12.6 0.496
0.3
12.6
5.4
5.7
5.7 0.224
5.45 0.215
1.40
1
13.10
13.1 0.516
0.3
1
3
3
4.35
PCB EDGE
1.00 0.039
PCB LAYOUT
TOP VIEW
MATING PLUG
Jack Insertion Depth: 8.2 mm
cui.com
3.05
(2 PLCS)
9.9
10.9
12.6
R0.5 (2 PLCS)
1.20X1.90
0.70X1.40
1
3
2
Schematic
Model
Center Pin
PJ-068B-SMT
Ø2.5 mm
For more information, please visit the product page
|
For information on related products, view External Power Supplies
CUI Inc │ MODEL: PJ-068B-SMT │ DESCRIPTION: MID MOUNT DC POWER JACK
date 05/09/2016 │ page 3 of 3
REVISION HISTORY
rev.
description
date
1.0
initial release
05/04/2011
1.01
updated spec, added jack insertion depth
10/23/2012
1.02
added TR package option
11/29/2012
increased voltage rating
05/09/2016
1.03
The revision history provided is for informational purposes only and is believed to be accurate.
Headquarters
20050 SW 112th Ave.
Tualatin, OR 97062
800.275.4899
Fax 503.612.2383
cui.com
[email protected]
CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website.
CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is
assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use.
CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical
component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to
affect its safety or effectiveness.