POWER TRANSFORMER CHASSIS MOUNT : TOROIDAL MEDICAL SERIES VPM36-6940 Description: The toroidal construction inherently reduces stray fields, increases efficiency and minimizes size compared to traditional EI transformers. The addition of a Flux Band further reduces the remaining stray fields. The shield between Primary and Secondary improves safety, reduces common mode signals and minimizes leakage current. Built with a Class F (155°) insulation system. A 140°C self-resetting thermal switch is included in each primary. Electrical Specifications (@25C) 1. Maximum Power: 250VA 2. Input Voltages: 100, 120, 220, 240VAC, 50/60Hz 3. Output Voltages: 18VAC @13.88A or 36VAC CT @ 6.94A 4. Voltage Regulation: 6.2% TYP from full load to no load 5. Temperature Rise: 55°C TYP 6. Hipot: 4000VAC, Primary to Secondary, Primary & Secondary to Shield & mounting surface 7. Efficiency: 93% TYP. @ full load Photo for illustration only RoHS 2011/65/EU Agency File: UL: File E122529, UL 60601-1/(R) 2012 Medical Electrical Equipment – Part 1 CE: ES 60601-1 (IEC 60601-1:2005, MOD) cUL: C22.2 No. 60601-1:14, Medical Electrical Equipment – Part 1 CB Certified. OD Dimensions: Inches (mm) O.D. I.D. HT.* 4.8 (123) 1.8(45) 2.4(60) *Add 0.188 (3) to the height for mounting hardware Weight: 2.5Kg BOLT MOUNTING METAL PLATE Mounting: FLAT WASHER RUBBER PAD Transformer is provided with one metal mounting plate, two rubber pads, M6 x 65mm bolt, nut, spring and flat washer. Connections: H Transformer is provided with 8” (203mm) long, 0.25” (6.35mm) stripped and tinned, stranded UL 1015 lead wire. Primaries are 20AWG, Secondaries are 14AWG, and Shield is 20AWG. The GRN/YEL shield lead is typically grounded. Do not lift transformer by leads! Input Options: 100VAC: Input to Gray & Blue, jumper White & Brown, jumper Blue & Violet. 120VAC: Input to White & Blue, jumper White & Brown, jumper Blue & Violet. 220VAC: Input to Gray & Violet, jumper Blue & Brown 240VAC: Input to White and Violet, jumper Blue & Brown Output Options: 18VAC: Output from Black & Red, jumper Black & Orange, jumper Red to Yellow 36VAC: Output from Black & Yellow, jumper Red & Orange PRI Primary and secondary windings are designed to be connected in series or parallel. Windings are not intended to be used independently. RoHS Compliance: Meets the requirements of 2011/65/EU, known as the RoHS 2 initiative. 460 Harley Knox Blvd. Perris, California 92571 NUT RUBBER PAD WHT GRY BLK BLU RED BRN ORG VIO YEL GRN/YEL * At printing, this document is considered “uncontrolled”. Contact Triad Magnetics’ website for current version Web: www.TriadMagnetics.com Phone 951-277-0757 Fax 951-277-2757 SPRING WASHER SCHEMATIC Publish Date: March 2, 2016 SEC