NTCS0402E3.....T Datasheet

NTCS0402E3.....T
www.vishay.com
Vishay BCcomponents
SMD 0402, Glass Protected NTC Thermistors
FEATURES
• TCR ranging from - 6.5 %/K at - 40 °C to - 2 %/K
at 150 °C
• Tolerance on R25 down to 1 %
• Suitable for wave or reflow soldering
• NiSn terminations
• Fully glass coated and protected
• cUL recognized for safety applications 
(file E148885)
• AEC-Q200 qualified
QUICK REFERENCE DATA
PARAMETER
VALUE
UNIT
4.7K to 100K

± 1; ± 2; ± 3; ± 5
%
3490 to 4075
K
Tolerance on B25/85-value
±3
%
Maximum dissipation at 25 °C
70
mW
Thermal time constant 
5
s
 2.0
mW/K
- 40 to + 150
°C
 1.2
mg
Resistance value at 25 °C
Tolerance on R25-value
B25/85-value
Dissipation factor D
Operating temperature range 
at zero power
Weight
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Temperature sensing, protection and compensation in
automotive,
industrial,
telecom
and
consumer
applications. Examples are:
- Battery chargers
- Power suppliers
- Office equipment
- LCD compensation
- In-car entertainment
DESCRIPTION
Size 0402 chip thermistors with a negative temperature
coefficient. The device has no marking.
PACKAGING
Available in 8 mm punched paper tape on reel package of
10 000 units.
DESIGN-IN SUPPORT
For complete Curve Computation, visit:
www.vishay.com/resistors-non-linear/ntc-curve-list/
ELECTRICAL DATA AND ORDERING INFORMATION
R25-VALUE
(k)
TOLERANCE ON R25
(%)
B25/85-VALUE
(K)
SAP MATERIAL AND ORDERING NUMBER ... (1)
4.7
± 3;± 5
3595
NTCS0402E3472*MT
10
± 1; ± 2; ± 3; ± 5
3490
NTCS0402E3103*LT
10
± 3;± 5
3950
NTCS0402E3103*HT
15
± 3;± 5
3965
NTCS0402E3153*HT
22
± 3;± 5
3590
NTCS0402E3223*MT
33
± 3;± 5
3670
NTCS0402E3333*MT
47
± 1; ± 2; ± 3; ± 5
4075
NTCS0402E3473*XT
68
± 3;± 5
3910
NTCS0402E3683*HT
100
± 1; ± 2; ± 3; ± 5
3950
NTCS0402E3104*HT
Note
(1) Replace * in SAP by J for ± 5 %, H for ± 3 %, G for ± 2 %, F for ± 1 % tolerance on R .
25
Revision: 04-Feb-13
Document Number: 29003
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NTCS0402E3.....T
www.vishay.com
Vishay BCcomponents
DIMENSIONS in millimeters
W
T
W
T
L2 AND L3
MIN.
L4
MIN.
1.0 ± 0.15
0.5 ± 0.15
0.5 ± 0.15
0.1
0.3
L3
L4
L2
L1
L1
SOLDERING CONDITIONS
This SMD thermistor is only suitable for wave or reflow soldering, in accordance with JEDEC J-STD-020. The maximum
temperature of 260 °C during 40 s should not be exceeded.
Typical examples of a soldering processes that will provide reliable joints without damage, are shown below.
Lead (Pb)-free Reflow Soldering Profile
Reflow Soldering
10 s
300
≈ 245 °C
215 °C
200
Temperature (°C)
Temperature (°C)
250
10 s
180 °C
130 °C
150
40 s
100
2 K/s
50
0
0
50
100
150
40 s max.
300
260 °C
250
235 °C
200
≈ 170 °C
20 s min.
150
≈ 60 s
6 K/s
max.
limit
normal
≈ 120 °C
100
2 K/s
max.
50
0
250
200
260 °C
≈ 245 °C
0
50
Time (s)
100
150
200
250
300
350
Time (s)
Recommended solder land pattern dimensions (mm)
0.5
0.5
1.5
PACKAGING
TAPE SPECIFICATIONS
All tape specifications are in accordance with IEC 60286-3. Basic dimensions are given below. Carrier tape material is paper.
DIMENSIONS OF PAPER TAPE in millimeters
T
P0
P2
D0
E1
F
W
B0
A0
P1
JWB288
T1
PARAMETER
A0 (1)
B0 (1)
W
E1
F
D0
P0 (2)
P1
P2
T tape thickness
T1 cover tape
DIMENSION
0.65
1.15
8.0
1.75
3.5
1.55
4.0
4.0
2.0
0.8
< 0.1
TOLERANCE
± 0.1
± 0.1
± 0.2
± 0.1
± 0.05
± 0.05
± 0.1
± 0.1
± 0.05
Max.
-
Notes
(1) Measured 0.3 mm above base pocket
(2) P pitch cumulative error over any 10 pitches ± 0.2 mm
0
Revision: 04-Feb-13
Document Number: 29003
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NTCS0402E3.....T
www.vishay.com
Vishay BCcomponents
For complete Curve Computation, visit: www.vishay.com/resistors-non-linear/ntc-curve-list/
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R25 AT 4.7 k, 10 k, AND 15 k
PART NUMBER
NTCS0402E3472*MT
TOPER
(°C)
RT
()
TCR
(%/K)
PART NUMBER
NTCS0402E3103*HT
PART NUMBER
NTCS0402E3103*LT
PART NUMBER
NTCS0402E3153*HT
RT
()
TCR
(%/K)
RT
()
TCR
(%/K)
RT
()
TCR
(%/K)
- 40
117 852
- 6.08
356 276
- 6.74
214 064
- 5.72
347 696
- 5.86
- 35
87 377
- 5.89
255 727
- 6.53
161 527
- 5.55
260 574
- 5.68
- 30
65 415
- 5.69
185 491
- 6.32
122 938
- 5.38
197 004
- 5.51
- 25
49 435
- 5.51
135 931
- 6.12
94 353
- 5.21
150 213
- 5.34
- 20
37 700
- 5.33
100 611
- 5.92
73 003
- 5.05
115 482
- 5.18
- 15
29 003
- 5.16
75 193
- 5.73
56 928
- 4.90
89 489
- 5.02
- 10
22 501
- 4.99
56 726
- 5.54
44 729
- 4.75
69 880
- 4.87
-5
17 599
- 4.83
43 185
- 5.37
35 402
- 4.61
54 973
- 4.73
0
13 873
- 4.68
33 166
- 5.19
28 217
- 4.47
43 555
- 4.59
5
11 019
- 4.53
25 688
- 5.03
22 643
- 4.33
34 747
- 4.45
10
8815.0
- 4.39
20 059
- 4.87
18 290
- 4.21
27 904
- 4.32
15
7101.0
- 4.26
15 787
- 4.71
14 867
- 4.08
22 552
- 4.20
20
5758.6
- 4.13
12 519
- 4.56
12 157
- 3.96
18 338
- 4.08
25
4700.0
- 4.00
10 000
- 4.42
10 000
- 3.85
15 000
- 3.96
30
3859.7
- 3.88
8044.1
- 4.28
8271.8
- 3.74
12 340
- 3.85
35
3188.4
- 3.76
6514.5
- 4.15
6879.3
- 3.63
10 207
- 3.74
40
2648.9
- 3.65
5310.0
- 4.03
5751.0
- 3.53
8487.0
- 3.64
45
2212.7
- 3.55
4355.3
- 3.90
4831.9
- 3.43
7092.9
- 3.54
50
1858.0
- 3.44
3593.7
- 3.79
4079.3
- 3.34
5956.9
- 3.44
55
1568.1
- 3.34
2982.4
- 3.67
3460.0
- 3.25
5026.4
- 3.35
60
1329.9
- 3.25
2488.8
- 3.56
2947.8
- 3.16
4260.5
- 3.26
65
1133.1
- 3.16
2088.0
- 3.46
2522.3
- 3.08
3627.1
- 3.18
70
969.76
- 3.07
1760.7
- 3.36
2167.2
- 2.99
3100.9
- 3.09
75
833.56
- 2.98
1492.1
- 3.26
1869.5
- 2.92
2661.8
- 3.01
80
719.47
- 2.90
1270.4
- 3.17
1618.9
- 2.84
2293.9
- 3.94
85
623.48
- 2.83
1086.7
- 3.08
1407.2
- 2.77
1984.3
- 3.86
90
542.38
- 2.75
933.57
- 2.99
1227.5
- 2.70
1722.7
- 2.79
95
473.58
- 2.68
805.43
- 2.91
1074.5
- 2.63
1500.9
- 2.72
100
414.98
- 2.61
697.71
- 2.83
943.67
- 2.56
1312.0
- 2.66
105
364.89
- 2.54
606.77
- 2.75
831.46
- 2.50
1150.7
- 2.59
110
321.91
- 2.47
529.68
- 2.68
734.86
- 2.44
1012.4
- 2.53
115
284.90
- 2.41
464.07
- 2.61
651.44
- 2.38
893.49
- 2.47
120
252.92
- 2.35
408.01
- 2.54
579.17
- 2.32
790.85
- 2.41
125
225.20
- 2.29
359.94
- 2.47
516.36
- 2.27
702.01
- 2.36
130
201.09
- 2.24
318.56
- 2.41
461.60
- 2.22
624.86
- 2.30
135
180.07
- 2.18
282.83
- 2.35
413.73
- 2.16
557.68
- 2.25
140
161.67
- 2.13
251.88
- 2.29
371.77
- 2.11
499.00
- 2.20
145
145.53
- 2.08
224.96
- 2.23
334.88
- 2.07
447.62
- 2.15
150
131.33
- 2.03
201.49
- 2.18
302.36
- 2.02
402.49
- 2.10
Revision: 04-Feb-13
Document Number: 29003
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NTCS0402E3.....T
www.vishay.com
Vishay BCcomponents
For complete Curve Computation, visit: www.vishay.com/resistors-non-linear/ntc-curve-list/
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R25 AT 22 k, 33 k, AND 47 k
TOPER
(°C)
PART NUMBER
NTCS0402E3223*MT
PART NUMBER
NTCS0402E3333*MT
PART NUMBER
NTCS0402E3473*XT
RT
()
TCR
(%/K)
RT
()
TCR
(%/K)
RT
()
TCR
(%/K)
- 40
501 412
- 5.84
831 939
- 6.14
1 514 773
- 6.19
- 35
376 174
- 5.66
615 449
- 5.92
1 114 829
- 6.07
- 30
284 754
- 5.48
460 194
- 5.71
825 417
- 5.95
- 25
217 417
- 5.31
347 596
- 5.51
615 030
- 5.82
- 20
167 386
- 5.15
265 065
- 5.33
461 300
- 5.69
- 15
129 900
- 4.99
203 964
- 5.15
348 340
- 5.55
- 10
101 585
- 4.84
158 295
- 4.99
264 846
- 5.41
-5
80 030
- 4.70
123 854
- 4.83
202 753
- 5.27
0
63 497
- 4.56
97 656
- 4.68
156 285
- 5.14
5
50 725
- 4.43
77 566
- 4.54
121 288
- 5.00
10
40 787
- 4.30
62 041
- 4.40
94 762
- 4.87
15
33 004
- 4.17
49 955
- 4.27
74 529
- 4.74
20
26 868
- 4.06
40 479
- 4.15
58 997
- 4.61
25
22 000
- 3.94
33 000
- 3.03
47 000
- 4.48
30
18 115
- 3.83
27 059
- 3.91
37 675
- 4.36
35
14 997
- 3.73
22 311
- 3.81
30 384
- 4.24
40
12 480
- 3.62
18 494
- 3.70
24 649
- 4.13
45
10 437
- 3.53
15 408
- 3.60
20 111
- 4.01
50
8770.6
- 3.43
12 900
- 3.51
16 500
- 3.90
55
7404.3
- 3.34
10 850
- 3.41
13 611
- 3.80
60
6278.7
- 3.25
9167.3
- 3.33
11 286
- 3.69
65
5347.1
- 3.17
7778.9
- 3.24
9406.7
- 3.59
70
4572.5
- 3.09
6628.2
- 3.16
7878.8
- 3.50
75
3925.6
- 3.01
5670.2
- 3.08
6630.6
- 3.40
80
3383.3
- 2.94
4869.3
- 3.01
5606.0
- 3.31
85
2926.6
- 2.86
4197.0
- 2.94
4760.9
- 3.22
90
2540.7
- 2.79
3630.4
- 2.87
4060.8
- 3.14
95
2213.2
- 2.73
3151.1
- 2.80
3478.2
- 3.06
100
1934.4
- 2.66
2744.1
- 2.73
2991.2
- 2.98
105
1696.1
- 2.60
2397.3
- 2.67
2582.5
- 2.90
110
1491.8
- 2.54
2100.7
- 2.61
2238.1
- 2.83
115
1316.1
- 2.48
1846.4
- 2.55
1946.8
- 2.75
120
1164.4
- 2.42
1627.5
- 2.50
1699.4
- 2.68
125
1033.1
- 2.37
1438.5
- 2.44
1488.5
- 2.62
130
919.03
- 2.31
1274.9
- 2.39
1308.2
- 2.55
135
819.74
- 2.26
1132.8
- 2.34
1153.4
- 2.49
140
733.03
- 2.21
1009.1
- 2.29
1020.1
- 2.43
145
657.10
- 2.16
901.13
- 2.24
904.86
- 2.37
150
590.44
- 2.12
806.58
- 2.19
805.02
- 2.31
Revision: 04-Feb-13
Document Number: 29003
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
NTCS0402E3.....T
www.vishay.com
Vishay BCcomponents
For complete Curve Computation, visit: www.vishay.com/resistors-non-linear/ntc-curve-list/
RESISTANCE VALUES AT INTERMEDIATE TEMPERATURES WITH R25 AT 68 k , AND 100 k
TOPER
(°C)
PART NUMBER
NTCS0402E3683*HT
PART NUMBER
NTCS0402E3104*HT
RT
()
TCR
(%/K)
RT
()
TCR
(%/K)
- 40
2 179 612
- 6.65
3 238 142
- 6.57
- 35
1 573 200
- 6.40
2 344 882
- 6.35
- 30
1 149 311
- 6.16
1 716 473
- 6.13
- 25
849 224
- 5.94
1 269 493
- 5.93
- 20
634 231
- 5.74
948 194
- 5.74
- 15
478 461
- 5.54
714 901
- 5.56
- 10
364 399
- 5.35
543 869
- 5.38
-5
280 036
- 5.18
417 320
- 5.21
0
217 046
- 5.01
322 855
- 5.05
5
169 589
- 4.86
251 741
- 4.90
10
133 529
- 4.71
197 771
- 4.75
15
105 906
- 4.56
156 492
- 4.61
20
84 582
- 4.43
124 685
- 4.48
25
68 000
- 4.30
100 000
- 4.35
30
55 015
- 4.18
80 711
- 4.22
35
44 778
- 4.06
65 539
- 4.11
40
36 656
- 3.95
53 530
- 3.99
45
30 173
- 3.84
43 967
- 3.88
50
24 968
- 3.74
36 306
- 3.78
55
20 766
- 3.64
30 135
- 3.68
60
17 354
- 3.54
25 138
- 3.58
65
14 570
- 3.45
21 069
- 3.48
70
12 288
- 3.36
17 740
- 3.39
75
10 407
- 3.28
15 003
- 3.31
80
8851.1
- 3.20
12 742
- 3.22
85
7557.3
- 3.12
10 867
- 3.14
90
6477.3
- 3.05
9303.8
- 3.07
95
5572.1
- 2.98
7996.1
- 2.99
100
4810.3
- 2.91
6897.4
- 2.92
105
4166.9
- 2.84
5970.8
- 2.85
110
3621.4
- 2.77
5186.3
- 2.78
115
3157.3
- 2.71
4519.8
- 2.72
120
2761.2
- 2.65
3951.5
- 2.66
125
2421.9
- 2.59
3465.3
- 2.60
130
2130.4
- 2.54
3048.0
- 2.54
135
1879.2
- 2.48
2688.7
- 2.48
140
1662.0
- 2.43
2378.3
- 2.43
145
1473.7
- 2.38
2109.4
- 2.37
150
1310.1
- 2.33
1875.8
- 2.32
Revision: 04-Feb-13
Document Number: 29003
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000