NTHS Series www.vishay.com Vishay Dale NTC Thermistors, SMD 0402, 0603, 0805, 1206 Chip FEATURES • Extended resistance values available in standard sizes • Wraparound Ni barrier terminations with 100 % Sn • Allows design flexibility for use with hybrid circuitry • High-density monolithic construction with glass overcoat • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS QUICK REFERENCE DATA PARAMETER Temperature sensing, protection and compensation in industrial, telecom and consumer applications. Examples are: VALUE UNIT 4.7K to 350K Ω ± 1, ± 2, ± 3, ± 5, ± 10 % B25/75 -value 3477 to 4247 K • LCD compensation B25/85 -value 3486 to 4261 K • In-car entertainment ±3 % -40 to +125 (150) °C Resistance value at 25 °C Tolerance on R25-value Tolerance on B25/85 - value, B25/75 -value Operating temperature range at zero power (intermittent) • Battery chargers • Power suppliers • Office equipment DESIGN-IN SUPPORT For complete curve computation please visit the “My Vishay NTC curve” at: www.vishay.com/thermistors/curve-computation-list/ or sent your part number to [email protected] to obtain a calculation spreadsheet. NTHS PRODUCT DATA AND R25 RESISTANCE RANGE AVAILABILITY R25 ± TOL. AVAILABILITY CURVE B25/75 (K) B25/85 (K) TCR (%/K) NTHS0402 (kΩ) NTHS0603 (kΩ) NTHS0805 (kΩ) 2 3477 3486 -3.84 10 to 12 6.8 to 12 4.7 to 10 6 to 10 3, 5, 10 11 3691 3715 -4.13 30 to 34 22 to 32 15 to 30 20 to 33 3, 5, 10 1 3964 3974 -4.39 68 to 100 (1) 50 to 100 33 to 78 38 to 100 1, 2, 3, 5, 10 5 3964 3974 -4.39 47 to 50 40 to 50 25 to 47 30 to 44 3, 5, 10 17 4064 4073 -4.50 250 150 to 220 100 to 200 100 to 220 3, 5, 10 4 4247 4262 -4.67 3, 5, 10 NTHS1206 (kΩ) 350 250 to 350 200 to 300 200 to 330 Maximum dissipation at 25 °C in mW 80 125 210 280 Dissipation factor in mW/K 2.0 3.0 3.5 4.0 Thermal time constant in s 5 8 10 13 Note (1) Only R tolerance values ± 3 %, ± 5 %, and ± 10 % are available for NTHS0402N01N types. 25 STANDARD RESISTANCE VALUES at 25 °C in Ω 4.7K 6.8K 12K 20K 30K 47K 68K 150K 220K 5.0K 10K 15K 22K 33K 50K 100K 200K 250K 330K Note • Most popular and available values. Revision: 24-Nov-15 Document Number: 33008 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NTHS Series www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION Global Part Numbering: NTHS1206N02N1002JE (preferred part number format) N T H S GLOBAL MODEL CONDUCTOR TYPE NTHS0402 NTHS0603 NTHS0805 NTHS1206 Nickel barrier 1 2 0 6 N 0 2 N 1 0 0 2 J E CURVE CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE PACKAGING 01 02 04 05 11 17 N 1002 = 10K F=±1% G=±2% H=±3% J=±5% K = ± 10 % F = Lead (Pb)-free, bulk E = Lead (Pb)-free, T/R (2K pcs, full) U = Lead (Pb)-free, T/R (5K pcs, full) DIMENSIONS in inches (millimeters) BW t L W PART NUMBER L W BW tmax. NTHS0402 0.040 ± 0.004 (1.02 ± 0.10) 0.022 ± 0.006 (0.56 ± 0.15) 0.010 ± 0.004 (0.25 ± 0.10) 0.028 (0.71) NTHS0603 0.063 ± 0.008 (1.60 ± 0.20) 0.031 ± 0.008 (0.80 ± 0.20) 0.010 ± 0.006 (0.25 ± 0.15) 0.039 (1.00) NTHS0805 0.079 ± 0.008 (2.01 ± 0.20) 0.049 ± 0.008 (1.25 ± 0.20) 0.012 ± 0.006 (0.30 ± 0.15) 0.057 (1.45) NTHS1206 0.126 ± 0.008 (3.20 ± 0.20) 0.063 ± 0.008 (1.60 ± 0.20) 0.018 ± 0.008 (0.46 ± 0.20) 0.071 (1.80) Note • Thickness of the part is depending on the resistance value and curve Revision: 24-Nov-15 Document Number: 33008 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000