TP-108 RF Pulse Transformer, 350 - 1125 MHz Rev. V3 Features • • • • • FP-1 50 Ohms Unbalanced to Dual 100 Ohms Unbalanced Unbalanced or 200 Ohms Balanced Low Insertion Loss Accessible Center Tap for DC Bias MIL-STD-202 Screening Available Description The transformer coupled balun can provide a wide frequency range. DC isolation from primary coil to secondary coil is also a feature of this device. Schematic/Pin Configuration . Electrical Specifications: TA = -55°C to +85°C Parameter Test Conditions Frequency Units Min Typ Max Impedance Input - 50 Ohms Unbalanced Output - 200 Ohms Balanced — — — — — Insertion Loss — 500 - 1000 MHz dB — — 1.0 VSWR — 500 MHz - 1000 MHz 350 MHz - 1125 MHz Ratio Ratio — — — — 1.5:1 2.5:1 350 MHz - 1125 MHz Watts — — 3.0 Input Power 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. TP-108 RF Pulse Transformer, 350 - 1125 MHz Rev. V3 Typical Performance Curves Ordering Information Part Number Package TP-108 PIN FP-1 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.