LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT LED TAPE AND REEL Pb Lead-Free Parts L3WK9Q53/TR1-P-WW-A01 DATA SHEET DOC. NO : QW0905-L3WK9Q53/TR1-P-WW-A01 REV. : A DATE : 04 - Jun. - 2010 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/13 PART NO. L3WK9Q53/TR1-P-WW-A01 Features: 1. Top view white LED. 2. white SMT package. 3. Leadframe package with individual 6 pin. 4.Wide viewing angle. 5.Soldering methods:IR reflow soldering. 6.Feature of the device:more light due to higher optical efficiency;extremely wide viewing angle;ideal for backlighting and coupling in light guide. Descriptions: The L3WK9Q53 SMD has wide viewing angle,low power consumption and white LEDs are devices which are materialized by combing blue LEDs and special phos phors.This feature makes the LED ideal for light guide application. Applications: 1. LCD back light. 2. Mobile phones. 3. Indicators. 4. Switch lights. 5. Lighting. Device Selection Guide: PART NO L3WK9Q53/TR1-P-WW-A01 COLOR MATERIAL InGaN/GaN Emitted Lens White Yellow Diffused LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/13 PART NO. L3WK9Q53/TR1-P-WW-A01 Package Dimensions 5.4 1.0 1 6 2 5 3 4 5.0 1.0 0.9 0.9 0.9 0.9 0.9 0.9 4.1 Soldering Terminal 5.0 1.6 1.0 1 6 2 5 3 4 1.0 Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. Recommended Soldering Pad Dimensions 6.8 2.0 2.0 1.2 0.4 0.4 Note : The tolerances unless mentioned is ± 0.1mm,Unit=mm. 1.2 1.2 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/13 PART NO. L3WK9Q53/TR1-P-WW-A01 Absolute Maximum Ratings at Ta=25 ℃ Symbol Ratings UNIT Forward Current IF 90 mA Peak Forward Current Duty 1/10@10KHz IFP 300 mA Power Dissipation PD 360 mW Reverse Current @5V Ir 50 μA Electrostatic Discharge ESD 500 V Operating Temperature Topr - 20 ~ + 80 ℃ Storage Temperature Tstg - 30 ~ + 100 ℃ Parameter Typical Electrical & Optical Characteristics (Ta=25 ℃) Items Min. Luminous Flux Symbol Min. Typ. ---- 10.7 15 ---- lm IF=60mA X 0.383 ---- 0.487 ---- IF=60mA Y 0.36 ---- 0.454 ---- IF=60mA VF 2.8 3.2 4.0 V IF=60mA 2θ 1/2 ---- 120 ---- deg IF=60mA Max. UNIT CONDITION Chromaticity Coordinates Forward Voltage Viewing Angle Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2.The luminous intensity data did not including ±15% testing tolerance. 3.The color coordinates measurememt allowance is ±0.01 testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 4/13 PART NO. L3WK9Q53/TR1-P-WW-A01 Luminous Intensity Classification BIN CODE F17 F18 F19 F20 Flux(lm) at60mA Min. Max. 10.7 13.9 18.1 23.5 13.9 18.1 23.5 30.6 Forward Voltage Classification BIN CODE 1 2 3 4 5 6 7 8 Vf(v) at60mA Min. Max. 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L3WK9Q53/TR1-P-WW-A01 Page 5/13 Chromaticity Coordinates Specifications For Bin Grading Color Coordiante at60mA CCT(K) 2670~2850 2850~3050 3050~3250 3250~3500 3500~3800 BIN CODE 1 2 3 4 X Y X Y X Y X Y MM 0.471 0.451 0.461 0.433 0.477 0.437 0.487 0.454 MN 0.461 0.433 0.453 0.416 0.467 0.420 0.477 0.437 MO 0.453 0.416 0.444 0.399 0.458 0.403 0.467 0.416 MP 0.458 0.403 0.444 0.399 0.436 0.384 0.449 0.338 NM 0.454 0.446 0.471 0.451 0.46 0.43 0.444 0.426 NN 0.444 0.426 0.46 0.43 0.453 0.416 0.438 0.412 NO 0.438 0.412 0.453 0.416 0.444 0.399 0.429 0.394 NP 0.429 0.394 0.444 0.399 0.436 0.384 0.422 0.379 PM 0.438 0.44 0.454 0.446 0.444 0.426 0.43 0.421 PN 0.43 0.421 0.444 0.426 0.438 0.412 0.424 0.407 PO 0.424 0.407 0.438 0.412 0.429 0.394 0.416 0.389 PP 0.416 0.389 0.429 0.394 0.422 0.379 0.41 0.374 QM 0.421 0.433 0.438 0.44 0.43 0.421 0.414 0.414 QN 0.414 0.414 0.43 0.421 0.424 0.407 0.409 0.4 QO 0.409 0.4 0.424 0.407 0.416 0.389 0.402 0.382 QP 0.402 0.382 0.416 0.389 0.41 0.374 0.396 0.367 RM 0.402 0.423 0.421 0.433 0.414 0.414 0.397 0.406 RN 0.397 0.406 0.414 0.414 0.409 0.4 0.392 0.391 RO 0.392 0.391 0.409 0.4 0.402 0.382 0.387 0.374 RP 0.387 0.374 0.382 0.396 0.367 0.383 0.36 0.402 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L3WK9Q53/TR1-P-WW-A01 Page 6/13 CIE Chromaticity Diagram RM PN QN RN QO RO QP PR PP PO NP NO MM NM PM QM MN NN MO MP LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 7/13 PART NO. L3WK9Q53/TR1-P-WW-A01 Typical Electro-Optical Characteristics Curve WK CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Relative Intensity @60mA Normalize @20mA Forward Current(mA) 1000 100 10 1 01 2.5 2.0 1.5 1.0 0.5 0.0 1.0 3.0 2.0 4.0 5.0 1 10 Fig.4 Relative Intensity vs. Temperature 1.2 Relative Intensity@20mA Intensity@60mA Normalize @25 ℃ Forward Voltage@20mA Voltage@60mA Normalize @25 ℃ Fig.3 Forward Voltage vs. Temperature 1.1 1.0 0.9 0.8 -20 0 20 40 60 80 3.0 2.5 2.0 1.5 1.0 0.5 0.0 100 -40 Fig.5 Luminous Spectrum(Ta=25 ℃) DC Forward Current [mA] 100 Intensity 80 60 40 20 0 600 Wavelength (nm) 700 0 20 40 60 80 100 Fig.6 Forward Current vs. Temperature SPECTRAL RADIANCE 500 -20 Ambient Temperature(℃) Ambient Temperature( ℃) 400 1000 Forward Current(mA) Forward Voltage(V) -40 100 800 80 70 Thermal Resistance : @ 0.5 ° C/mA 60 50 40 30 20 10 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature Ta (℃) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 8/13 PART NO. L3WK9Q53/TR1-P-WW-A01 Carrier Type Dimensions 4.0 2.0 ψ1.5 8.0 1.95 1.75 5.5 12.0 9.3 ±0.3 5.4 Polarity Note : The tolerances unless mentioned is ±0.1mm,Angle ± 0.5. Unit=mm. • Packing Specifications 0.2 0.8 0.6 Aluminum Moist-Proof bag Label 0.8 0.6 0.2 0.4 0.4 Label Part No. Description Quantity/Reel L3WK9Q53/TR1-P-WW-A01 12.0mm tape,7"reel 1000 PCS LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L3WK9Q53/TR1-P-WW-A01 Page 9/13 Label Explanation LIGITEK ELECTRONICS CO., LTD. Pb PART : L3WK9Q53/TR1/A-P-WW-A01 BIN : Luminous Flux LOT : GS1-060108 QTY(PCS): 1000 HUE : Chromaticity Coordinates (CIE_x , CIE_y) BIN/HUE : F18/QP VF:3-3.1 3 - 3.1 : Forward Voltage Reel Dimensions 0.2 0.4 0.8 0.8 0.6 0.2 0.4 0.6 2.0±0.5 ψ13.5±1.0 178±1.5 60.0±1.0 13.0±1.0 16.0±1.0 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L3WK9Q53/TR1-P-WW-A01 Page 10/13 Box Explanation 1. 4 BAG / INNER BOX 2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm H W L 3. 10 INNER BOXES / CARTON 4. CARTON SIZE : L X W X H 49cm X 46cm x 29cm L W H LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 11/13 PART NO. L3WK9Q53/TR1-P-WW-A01 Recommended Soldering Conditions 1. Hand Solder Basic spec is ≦ 320 ℃ 3 sec one time only. 2. Wave Solder Soldering heat Max. 260 ℃ 245± 5℃ within 5 sec 120 ~ 150℃ Preheat 120 ~ 180 sec 3 PB-Free Reflow Solder 1~5° C/sec Preheat 180~200 ° C 1~5° C/sec 260° C MaX. 10sec.Max 6° C/sec Above 220 ° C 60 sec.Max. 120 sec.Max. Note: 1.Reflow soldering should not be done more than two times. 2.When soldering,do not put stress on the LEDs during heating. 3.After soldering,do not warp the circuit board. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L3WK9Q53/TR1-P-WW-A01 Page 12/13 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 ℃~35℃,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 ℃ ~ 35℃,RH60%, they should be treated at 60 ℃± 5 ℃fo r 15hrs. Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40 % of its desired value. Circuit model A Circuit model B LED LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. L3WK9Q53/TR1-P-WW-A01 Page 13/13 Reliability Test: (1)Test items and results Classification Test Item Test Condition Sample Size Operating Life Test 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=60mA 3.t=1000 hrs 22 High Temperature Storage Test 1.Ta=105 ℃± 5℃ 2.t= 500 hrs 22 Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs 22 High Temperature High Humidity Storage Test 1.IR-Reflow In-Board, 2 Times 2.Ta= 8 5℃± 5℃ 3.RH=90 %~95 % 4.t= 500 hrs±2hrs 22 1.IR-Reflow In-Board,2 times 2.Ta=105 ℃ ±5℃& -40 ℃± 5℃ (30min) ( 30min) 3.total 100 cycles 22 1.T.Sol=260 ℃±5℃ 2.Dwell Time= 10 Max . 22 1.105 ℃ ~ 25 ℃ ~ - 40 ℃ 30mins 15mins 30mins 2.10 0 Cyeles 22 Endurance Test Thermal Shock Test Environmental Test Reflow Soldering Test Temperature Cycling (2)Criteria for judging the damage Criteria for Judgement Item Symbol Test Conditions Min. Max. Forward Voltage Vf If=60mA - U.S.L x1.2 Reverse Current Ir Vr=5V - U.S.L x2.0 Luminous Intensity Iv If=60mA L.S.L x 0.5 - Note: 1.U.S.L.:Upper Standard Level. 2.L.S.L.:Lower Standard Level.