For more information, please visit the product page. date 01/14/2013 page 1 of 2 MODEL: PPM-2-35135-S │ DESCRIPTION: DC POWER PLUG FEATURES • • • • designed for over-molding spring contacts smooth barrel 5A current rating SPECIFICATIONS parameter max units rated voltage conditions/description min typ 24 Vdc rated current 5 A 30 mΩ contact resistance insulation resistance at 500 Vdc voltage withstand for 1 minute 100 operating temperature MΩ -25 operating humidity RoHS compliant 500 Vac 70 °C 85 %RH yes MECHANICAL DRAWING units: mm tolerance: ±0.02 mm (unless otherwise noted) cui.com DESCRIPTION MATERIAL PLATING 1 insulator PBT 2 sleeve brass nickel 3 center contact phosphor bronze nickel 4 spacer POM For more information, please visit the product page. CUI Inc │ MODEL: PPM-2-35135-S │ DESCRIPTION: DC POWER PLUG date 01/14/2013 │ page 2 of 2 REVISION HISTORY rev. 1.0 description date initial release 01/14/2013 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.