PART NAME PART No. EXTRUDED ALUMINUM ENCLOSURE .012 0.30 .134 3.40 .115 2.92 DETAIL B 4.315 109.60 R.020 typ. 0.50 1.811 46 EXTRUSION 0.12[3] THROUGH 0.236[6] X 90 4X 4.055 103 3.937 100 END PANEL - NOT TO SCALE .103 2.62 .103 2.62 R.012 0.30 .459 11.66 .356 9.04 .012 0.30 .103 2.62 A .079 2 1.642 41.70 1.811 46 1.193 30.30 1.114 28.30 4.134 105 1.035 26.30 1.598 40.60 2X D .079 2 .115 3X 2.92 R.012 TYP. 0.30 .012 TYP. 0.30 R.020 2X 0.50 .157 4 .079 2 .118 3 .197 4.99 .591 15 B .315 8 .393[10] X .157[4] SLOT .374 9.50 SECTION D-D SCALE 1 : 1 4 PLACES D NOTES: 4.055 103 1- MATERIAL: EXTRUSION/END PANELS - ALUMINUM 5.236 133 EXTRUSION PROFILE DETAIL A SCALE 2.6 : 1 END PANELS 2X 0.059[1.5] THICK R.039 4X 1 .079 2 1.252 31.80 2/9/15 1.598 40.60 .103 2.62 .115 2.92 REVISION DATE EXT-9167 .236 6 2- FINISH: BLACK 3- DIMENSIONS ARE INCH[MM] 4- TOLERANCE ON PROFILE/END PANELS = +/- .020[.50] TOLERANCE ON CUT LENGTH = +/- .062[1.57] 5- SUPPLIED WITH TWO END PANELS AND EIGHT M2.5 X 8mm STAINLESS STEEL - BLACK ZINC PLATE - FLATHEAD PHILLIPS SCREWS FOR MOUNTING THE PANELS