Model No. Rev. FYM-23882C/DX-XX A PRODUCT SPECIFICATION Model No.： ：FYM-23882C/DX-XX Descriptions & Features: ■2.3 inch (60.20mm) Matrix height, Dot Matrix Display ■8*8Array with X-Y Select. ■Case mold type. ■RoHS compliant. ■Low current operation ■Low power consumption. ■Easy mounting on P.C. board or socket. CUSTOMER APPROVED SIGNATURES APPROVED BY NINGBO FORYARD OPTOELECTRONICS CO.,LTD Add:NO.115 Qixin Road Ningbo Zhejiang China Tel: 0086-574-87933652 87927870 87922206 Fax: 0086-574-87927917 E-mail:[email protected] ( General) CHECKED BY PREPARED BY Zip:315051 Http://www.foryard.com Http://www.foryard.com Page： 1/5 Model No. Rev. FYM-23882C/DX-XX A Model No.： ：FYM-23882C/DX-XX ■ -XX: REF Surface / Epoxy color Color Number REF Surface Color Epoxy Color 0 ○ White 1 2 ○ Black ○ Gray ○ Water Clear ○ White ○ Red 3 ○ Red 4 ○ Green ○ Green ○ Yellow ■ Mechanical Dimensions Notes: 1. All pins are Φ0.60[.024]mm 2. Dimension in millimeter [inch], tolerance is ±0.25 [.010] and angle is ±1° unless otherwise noted. 3. Bending≤Length*1%. 4.The specifications,characteristics and technical data described in the datasheet are subject to change without prior notice. Http://www.foryard.com Page： 2/5 Model No. Rev. FYM-23882C/DX-XX A Model No.： ：FYM-23882C/DX-XX ■ All Light On Dot Feature & Pin Position ■ Internal Circuit Diagrams Http://www.foryard.com Page： 3/5 Model No. Rev. FYM-23882C/DX-XX A Model No.： ：FYM-23882C/DX-XX ■ Absolute maximum ratings (Ta=25℃) Par ameter Symbol Test Condition VR IF Pd Ipeak Topr Tstr IR=30 — — Duty=0.1mS,1KHz — — Reverse Voltage Forward Current Power Dissipation Pulse Current Operating Temperature Storage Temperature Value Min Max 5 — — — -40 -40 — 30 100 150 +85 +85 ■ Electrical-Optical Characteristics ● Color Code & Chip Characteristics:(Test Condition:IF=20mA) Emitting Color Standard brightness H Red S Hi Red D Super Red E Orange A Amber Y Yellow G Green Dice Material Peak Wave Length(λP) Unit V mA mW mA ℃ ℃ (Ta=25℃) Spectral Luminous Forward Line Voltage(VF) Unit:V Intensity halfwidth(∆ (Iv) λ1/2) Unit:mcd Max Typ 700nm 90nm 660nm 20nm 650nm 20nm 625nm 35nm 610nm 35nm 590nm 35nm 570nm 10nm 430nm 60nm 460nm 470nm 520nm 36nm X=0.29,Y=0.30 CCT:9500K 2.00 1.80 1.90 1.90 1.90 1.90 1.90 3.40 2.80 2.80 2.80 2.80 2.50 2.50 2.50 2.50 2.50 2.50 2.50 4.40 3.80 3.80 3.80 3.80 1 15~20 26~38 14~20 13~18 13~18 14~18 0.7~1(mw) 6~12(mw) 6~12(mw) 4~6(mw) 20~30 640nm 20nm 635nm 20nm 625nm 20nm 610nm 20nm 590nm 20nm 570nm 30nm 520nm 36nm 505nm 36nm 460nm 30nm UB Ultra Blue InGaN 470nm 30nm InGaN X=0.29,Y=0.30 CCT:9500K UW Ultra White Dot-to-Dot Luminous Intensity ratio(Iv-M) 1.5:1 1.90 1.90 1.90 1.90 1.90 1.90 2.80 2.80 2.80 2.80 2.80 2.50 2.50 2.50 2.50 2.50 2.50 3.80 3.80 3.80 3.80 3.80 30~60 60~100 60~120 40~100~150 50~140~190 30~60~80 260~310 260~310 80~90~120 80~90~120 180~200 B Blue PG Pure Green W White Ultra brightness UHR Ultra Hi Red UR Ultra Red UE Ultra Orange UA Ultra Amber UY Ultra Yellow UG Ultra Green PG Ultra Pure Green BG Ultra Bluish Green GaP AlGaAs/SH AlGaAs/DH GaAsP GaAsP GaAsP GaP InGaN InGaN InGaN AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP InGaN InGaN Note: 1.Luminous Intensity is based on the Foryard standards. 2.Pay attention about static for InGaN Http://www.foryard.com Page： 4/5 Model No. Rev. FYM-23882C/DX-XX A Model No.： ：FYM-23882C/DX-XX ■ Packing Diagram 8PCS/Foam FORYARD O P TO E L E C T R O NI C S RoHS Part NO: FYM-23882XX-XX Q'TY: 24 PCS Date:xxxx/xx/xx PASS QC QC: xxxxxxxxxx 3Foams/Bag 56.0 31 .0 OUTSIDE LABEL 17.0 54.0 FORYARD 36.0 O P T O E L E C T R O N I C S 14 .5 4Bags/Box www.foryard.com 4Boxes/Carton FORYARD O P T O E L E C T R O N I C S LED PN:FYM-23882X-XX Qty: 448 PCS Date:xxxx/xx/xx GW: 23KG PASS QC: QC NW: 25KG xxxxxxxxxx RoHS ATTENTION OUTSIDE LABEL Note: The specifications are subject to change without notice. Please contact us for updated information. Http://www.foryard.com Page： 5/5