Control Transformer Class 2 TCT50-02E07AB Description: Triad control transformers come with tamper resistant shrouds for safety and a steel bracket welded to the bottom of the transformer for ease of mounting. These transformers are design and have the safety agency recognition for application where a Class 2 transformer is necessary. Some of the applications would include, but not limited to HVAC, Control boards, Lighting, etc. Picture for illustration only!! Electrical Specifications (@25C): 1. Maximum Power: 50VA 2. Input: 240V, 50/60 Hz, (Fuse: 0.375A Max) 3. Output: 24V @ 2.08Amps, (Fuse: 3.0A Max) 4. Voltage Regulation: 15% TYP @ full load to no load 5. Temperature Rise: <40°C TYP 6. Hipot: 1500VAC – Input to Output, Input & Output to Core 7. Recommended Fusing: UL Listed, 3AG time-delay type. Fuse can be use on primary or secondary. 1.80±.0.04 0.19+0.01,-0 Construction: Three flange bobbin construction with primaries and secondaries wound side by side for low capacitive coupling. Unit weight is 2.0lbs. Agency File: 3.13±0.02 UL: File E65390, UL 5085-3 (1585), Class 2 Transformer cUL: File E65390, UL 5085-3 (1585) For Canadian Use (CSA 22.2, No.66.3-06) 2.22±0.04 Input: Quick Disconnect tabs, 0.5 x 0.25 x 0.032 Output: Quick Disconnect tabs, 0.5 x 0.25 x 0.032 Schematic: 240V 24V 2.6±0.02 COM COM RoHS Compliance: As of manufacturing date February 2005, all standard products meet the requirements of 2011/65/EU, known as the RoHS initiative. As of April 7, 2008, UL standards 506 and 1585 will be migrated to UL 5085-2 and 5085-3, respectively. * Upon printing, this document is considered “uncontrolled”. Please contact Triad Magnetics’ website for the most current version. Web: www.TriadMagnetics.com Phone 951-277-0757 Fax 951-277-2757 460 Harley Knox Blvd. Perris, California 92571 0.87±0.04 2.74±0.04 Publish Date: December 4, 2013 2.17±0.04 1.55±0.02 Connections: 3.64±0.02