Analog Power AM30N02-40D N-Channel 20-V (D-S) MOSFET These miniature surface mount MOSFETs utilize High Cell Density process. Low rDS(on) assures minimal power loss and conserves energy, making this device ideal for use in power management circuitry. Typical applications are PWMDC-DC converters, power management in portable and battery-powered products such as computers, printers, battery charger, telecommunication power system, and telephones power system. • • • • PRODUCT SUMMARY VDS (V) rDS(on) m(Ω) 29 @ VGS = 4.5V 20 43 @ VGS = 2.5V ID (A) 34 22 Low rDS(on) Provides Higher Efficiency and Extends Battery Life Miniature TO-252 Surface Mount Package Saves Board Space High power and current handling capability Low side high current DC-DC Converter applications ABSOLUTE MAXIMUM RATINGS (TA = 25 oC UNLESS OTHERWISE NOTED) Symbol Limit Units Parameter VDS 20 Drain-Source Voltage V VGS ±12 Gate-Source Voltage a o TC=25 C ID Continuous Drain Current b Pulsed Drain Current a Continuous Source Current (Diode Conduction) a 40 IS 30 A 50.0 W TC=25 C P D TJ, Tstg -55 to 175 Operating Junction and Storage Temperature Range THERMAL RESISTANCE RATINGS Parameter Symbol a A IDM o Power Dissipation Maximum Junction-to-Ambient Maximum Junction-to-Case 34 RθJA RθJC Maximum o C Units 50 o 3.0 o C/W C/W Notes a. Surface Mounted on 1” x 1” FR4 Board. b. Pulse width limited by maximum junction temperature 1 November, 2003 - Rev. A PRELIMINARY Publication Order Number: DS-AM30N02-40_C Analog Power AM30N02-40D SPECIFICATIONS (TA = 25oC UNLESS OTHERWISE NOTED) Parameter Symbol Test Conditions VGS(th) IGSS VDS = VGS, ID = 250 uA Min Limits Unit Typ Max Static Gate-Threshold Voltage Gate-Body Leakage Zero Gate Voltage Drain Current On-State Drain Current A IDSS ID(on) A Drain-Source On-Resistance A Forward Tranconductance Diode Forward Voltage rDS(on) gfs VSD 0.7 VDS = 0 V, VGS = 20 V ±100 VDS = 16 V, VGS = 0 V 1 25 o VDS = 16 V, VGS = 0 V, TJ = 55 C VDS = 5 V, VGS = 4.5 V VGS = 4.5 V, ID = 17 A VGS = 2.5 V, ID = 11 A 34 uA A 29 43 VDS = 10 V, ID = 17 A IS = 34 A, VGS = 0 V V nA 22 1.1 mΩ S V Dynamicb Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall-Time Qg Qgs Qgd td(on) tr td(off) tf VDS = 10 V, VGS = 4.5 V, ID = 11 A VDD = 10 V, RL = 25 Ω , ID = 34 A, VGEN = 10 V 13.4 0.9 2.0 16 5 23 3 nC nS Notes a. Pulse test: PW <= 300us duty cycle <= 2%. b. Guaranteed by design, not subject to production testing. Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer. 2 November, 2003 - Rev. A PRELIMINARY Publication Order Number: DS-AM30N02-40_C Analog Power AM30N02-40D Package Information 3 November, 2003 - Rev. A PRELIMINARY Publication Order Number: DS-AM30N02-40_C