PART No. A BODY 4.20in 106.7mm 4.88in 123.8mm PANEL A COVER HOLE PLUG 2PLCS. C 6.47in 164.3mm SECTION A-A 8/12/2010 1.00in 25.4mm .62in 15.6mm .14in 3.4mm SECTION C-C ASSEMBLY SECTION B-B 2.95in 74.9mm 6.01in 152.5mm INSIDE LENGTH MIN. 3.78in 96.1mm 4.90in 124.4mm 4.57in 116.1mm FLOOR PANEL .52in 13.2mm 5.01in 127.3mm 5.01in 127.3mm 3.55in 90.1mm 6.10in 154.9mm INSIDE LENGTH MAX. M5 x 0.8 THREADED BRASS INSERT 2 PLCS. .14in 3.4mm WALL THICKNES TYP. B 6.10in 154.9mm INSIDE WIDTH MAX. 4.88in 123.8mm PANEL 6.47in 164.4mm 4.25in 108.0mm 7.04in 178.7mm M5 x 0.8 THREADED BRASS INSERT 4 PLCS. B 7.74in 196.5mm C 7.74in 196.5mm 7.04in 178.7mm 6.47in 164.3mm 4.25in 108.0mm REVISION DATE NFL-6630 3.23in 82.1mm FIBERGLASS NEMA BOX 6.01in 152.5mm INSIDE WIDTH MIN. PART NAME TOLERANCES: .02" (0.5mm) [UNLESS OTHERWISE SPECIFIED] in .31 m m 7.9 LOT S . 15 63in .9m SLO m T NOTE: WALL MOUNTING BRACKETS AND SCREWS SUPPLIED - UNASSEMBLED. MATERIAL: BODY & COVER - FIBERGLASS REINFORCED POLYESTER (SMC) PANEL - 14 GA. (2mm) THK. COLD ROLLED STEEL MOUNTING BRACKETS - 12 GA. (2.5mm) 304 STAINLESS STEEL HINGE - 18 GA. (1.2mm) THK. 304 STAINLESS STEEL LATCH - 17 GA. (1.3mm) THK. STAINLESS STEEL GASKET - SILICONE SPONGE FINISH: BODY & COVER - LIGHT GREY PANEL - WHITE POLYESTER POWDER COAT MOUNTING BRACKETS & HINGE - NATURAL