Crystal Clock Oscillators 97SMO(K) (+1.8V, +2.5V, +2.8V, +3.0V or +3.3V FIXED MODELS) 97SMO(K) STANDARD SMD CLOCK OSCILLATORS STANDARD SPECIFICATIONS Item Generic part number Frequency range Frequency stability (0˚C to +70˚C) over all conditions Operating Conditions Operating temperature 0˚C to +70˚C (standard) -40˚C to +85˚C (W) Input voltage (VDD) 97SMO(K) +1.8V※2 ±5%, +2.5V※3 ±5%, +2.8V ±5%, +3.0V ±10% or +3.3V ±10% VIH : 70%VDD min. VIL : 20%VDD max.※4 Stand-by control voltage (Pin#1) 7.0±0.2 Absolute Max. Ratings Supply voltage Storage temperature Input current (Pin#1 = Open or VIH) #2 1.4 3.68 1.3±0.2 #1 1.4 #2 1.2 2.6 1.2 #1 -0.5V to +7.0V DC -55˚C to +125˚C 20 mA max. (VDD = +1.8V) 26 mA max. (VDD = +2.5V) 55 mA max. (VDD = +2.8V, +3.0V & +3.3V) 10μA max. (Pin#1=VIL) #4 #3 5.08 PIN 1 2 3 4 CONNECTION "L" OPEN or "H" GND Z OUTPUT VDD Z : high impedance OUTPUT WAVEFORM TR TF VOH ("1"Level) VDD 90% or 80% VDD VOL ("0"Level) GND 10% or 20% VDD OV DC Stand-by current※2 Output (-40˚C to +85˚C) Symmetry Rise and fall times "0" level "1" level Load Disable delay time Enable delay time Startup time Aging Reflow condition 40% to 60% at 50%VDD level 10 ns max. (10%VDD to 90%VDD level) VOL : 10%VDD max. VOH : 90%VDD min. 15 pF max. (CMOS) 150 ns max. 10 ms max. 10 ms max. ±5 ppm max. at +25˚C ±3˚C for first year +250˚C ±10˚C for 10 seconds +170˚C ±10˚C for 1 to 2 minutes (preheating) 50% VDD t T Symmetry=t/T×100(%) TEST CIRCUIT Test Point VDD #3 #4 OUTPUT TRI-STATE GND #1 E/D SW V 0.01μF∼0.1μF DC Power Supply PACKAGE DATA Package Item A VDD (※1) Final exact part number to be determined with frequency, frequency stability, operating temperature and input voltage. e.g. 97SMO(K3.3VP) 16.000 MHz. (※2) Frequency range is 1.0 MHz to 50.0 MHz. (※3) Frequency range is 1.0 MHz to125.0 MHz. (※4) Internal crystal oscillation to be halted (Pin#1 = VIL). CL #2 CL : including fixture and probe capacitance. Metal Base Ceramic Sealing Seam Terminal Tungsten (metalized) Terminal plating SOLDERING PATTERN 3.28 RoHS 1.8 Gold / Nickel TAPE SPECIFICATIONS (surface) / (under) 4.0±0.1 2.0±0.1 L Compliant (Pb-free) φ1.5 +-0.1 0 2.0 A D 1.8 97SMO(K) Lid 1.75±0.1 #3 5.0±0.2 #4 2.2 J 2.0 0.01μF ∼ 0.1μF 5.08 84 C CLK OSC Actual Size Specifications 97SMO(K)※1 1.000 MHz to 166.000 MHz 97SMO(KL) : ±100 ppm 97SMO(KM) : ±50 ppm 97SMO(KN) : ±30 ppm 97SMO(KP) : ±25 ppm 97SMO(KQ) : ±20 ppm B M A B C D F J F L M Reel Dia. Qty/Reel 7.65 5.75 16.0 7.5 8.0 2.0 0.3 2.2 178 1000pcs