WD ® R NE63 O F L5 2 D ED MEN L5260, E M O R EC SE E E Data Sheet NOT ESIG NS July 26, 2007 Dual 300MHz Current Feedback Amplifier with Enable The EL5293 and EL5293A represent dual current feedback amplifiers with a bandwidth of 300MHz. This makes these amplifiers ideal for today’s high speed video and monitor applications. With a supply current of just 4mA per amplifier and the ability to run from a single supply voltage from 5V to 10V, these amplifiers are also ideal for hand held, portable or battery powered equipment. The EL5293A also incorporates an enable and disable function to reduce the supply current to 100µA typical per amplifier. Allowing the CE pin to float or applying a low logic level will enable the amplifier. The EL5293 is offered in the industry-standard 8 Ld SOIC package and the space-saving 8 Ld MSOP package. The EL5293A is available in a 10 Ld MSOP package and all operate over the industrial temperature range of -40°C to +85°C. PART NUMBER FN7193.3 Features • 300MHz -3dB bandwidth • 4mA supply current (per amplifier) • Single and dual supply operation, from 5V to 10V • Fast enable/disable (EL5293A only) • Single (EL5193) and triple (EL5393) available • High speed, 1GHz product available (EL5191) • High speed, 6mA, 600MHz product available (EL5192, EL5292, and EL5392) • Pb-free plus anneal available (RoHS compliant) Applications • Battery-powered equipment • Hand-held, portable devices • Video amplifiers • Cable drivers • RGB amplifiers Ordering Information PART MARKING EL5293, EL5293A PACKAGE PKG. DWG. # • Test equipment • Instrumentation EL5293CS 5293CS 8 Ld SOIC MDP0027 • Current to voltage converters EL5293CS-T7* 5293CS 8 Ld SOIC MDP0027 Pinouts EL5293CS-T13* 5293CS 8 Ld SOIC MDP0027 EL5293CSZ (Note) 5293CSZ 8 Ld SOIC (Pb-free) MDP0027 EL5293CSZ-T7* (Note) 5293CSZ 8 Ld SOIC (Pb-free) MDP0027 EL5293CSZ-T13* (Note) 5293CSZ 8 Ld SOIC (Pb-free) MDP0027 EL5293CY V 8 Ld MSOP MDP0043 EL5293CY-T7* V 8 Ld MSOP MDP0043 EL5293CY-T13* V 8 Ld MSOP MDP0043 EL5293ACY Y 10 Ld MSOP MDP0043 EL5293ACY-T7* Y 10 Ld MSOP MDP0043 EL5293ACY-T13* Y 10 Ld MSOP MDP0043 OUTA 1 INA- 2 8 VS+ + 7 OUTB 6 INB- INA+ 3 NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. + VS- 4 5 INB+ EL5293A (10 LD MSOP) TOP VIEW INA+ 1 CEA 2 *Please refer to TB347 for details on reel specifications. 1 EL5293 (8 LD SOIC, MSOP) TOP VIEW 10 INA+ VS- 3 CEB 4 INB+ 5 9 OUTA 8 VS+ + - 7 OUTB 6 INB- CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2003, 2005, 2007. All Rights Reserved All other trademarks mentioned are the property of their respective owners. EL5293, EL5293A Absolute Maximum Ratings (TA = +25°C) Thermal Information Supply Voltage between VS+ and VS- . . . . . . . . . . . . . . . . . . . . . 11V Pin Voltages . . . . . . . . . . . . . . . . . . . . . . . . .VS- - 0.5V to VS+ +0.5V Maximum Continuous Output Current . . . . . . . . . . . . . . . . . . . 50mA Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C Ambient Operating Temperature . . . . . . . . . . . . . . . .-40°C to +85°C Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +125°C Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Curves Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below http://www.intersil.com/pbfree/Pb-FreeReflow.asp CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and result in failures not covered by warranty. Electrical Specifications PARAMETER VS+ = +5V, VS- = -5V, RF = 750Ω for AV = 1, RF = 375Ω for AV = 2, RL = 150Ω, TA = +25°C unless otherwise specified. DESCRIPTION CONDITIONS MIN (Note 2) TYP MAX (Note 2) UNIT AC PERFORMANCE BW -3dB Bandwidth AV = +1 300 MHz AV = +2 200 MHz 20 MHz 2200 V/µs BW1 0.1dB Bandwidth SR Slew Rate VO = -2.5V to +2.5V, AV = +2 tS 0.1% Settling Time VOUT = -2.5V to +2.5V, AV = -1 12 ns CS Channel Separation f = 5MHz 60 dB eN Input Voltage Noise 4.4 nV/√Hz iN- IN- Input Current Noise 17 pA/√Hz iN+ IN+ Input Current Noise 50 pA/√Hz dG Differential Gain Error (Note 1) AV = +2 0.03 % dP Differential Phase Error (Note 1) AV = +2 0.04 ° 1900 DC PERFORMANCE VOS Offset Voltage TCVOS Input Offset Voltage Temperature Coefficient Measured from TMIN to TMAX ROL Transimpediance -10 1 10 mV 5 µV/°C 300 600 kΩ INPUT CHARACTERISTICS CMIR Common Mode Input Range ±3 ±3.3 V CMRR Common Mode Rejection Ratio 42 50 dB +IIN + Input Current -60 1 80 µA -IIN - Input Current -35 1 35 µA RIN Input Resistance 45 kΩ CIN Input Capacitance 0.5 pF OUTPUT CHARACTERISTICS VO RL = 150Ω to GND ±3.4 ±3.7 V RL = 1kΩ to GND ±3.8 ±4.0 V Output Current RL = 10Ω to GND 95 120 mA ISON Supply Current - Enabled (per amplifier) No load, VIN = 0V 3 4 5 mA ISOFF Supply Current - Disabled (per amplifier) No load, VIN = 0V 100 150 µA PSRR Power Supply Rejection Ratio DC, VS = ±4.75V to ±5.25V IOUT Output Voltage Swing SUPPLY 2 55 75 dB FN7193.3 July 26, 2007 EL5293, EL5293A Electrical Specifications PARAMETER -IPSR VS+ = +5V, VS- = -5V, RF = 750Ω for AV = 1, RF = 375Ω for AV = 2, RL = 150Ω, TA = +25°C unless otherwise specified. (Continued) DESCRIPTION - Input Current Power Supply Rejection CONDITIONS DC, VS = ±4.75V to ±5.25V MIN (Note 2) TYP -2 MAX (Note 2) UNIT 2 µA/V ENABLE (EL5293A ONLY) tEN Enable Time 40 ns tDIS Disable Time 600 ns IIHCE CE Pin Input High Current CE = VS+ 0.8 6 µA IILCE CE Pin Input Low Current CE = VS- 0 -0.1 µA VIHCE CE Input High Voltage for Power-down VILCE CE Input Low Voltage for Power-down VS+ - 1 V VS+ - 3 V NOTE: 1. Standard NTSC test, AC signal amplitude = 286mVP-P, f = 3.58MHz 2. Parts are 100% tested at +25°C. Over-temperature limits established by characterization and are not production tested. 3 FN7193.3 July 26, 2007 EL5293, EL5293A Typical Performance Curves Non-Inverting Frequency Response (Gain) Non-Inverting Frequency Response (Phase) 6 90 AV=1 0 2 AV=2 AV=2 -2 Phase (°) Normalized Magnitude (dB) AV=1 AV=5 -6 -90 AV=5 -180 AV=10 AV=10 -10 -270 -14 1M RF=750Ω RL=150Ω 10M 100M -360 1M 1G RF=750Ω RL=150Ω 10M Frequency (Hz) Inverting Frequency Response (Gain) 90 AV=-1 2 AV=-1 AV=-2 0 -2 Phase (°) Normalized Magnitude (dB) 1G Inverting Frequency Response (Phase) 6 AV=-3 -6 -10 -90 AV=-2 AV=-3 -180 -270 -14 1M RF=500Ω RL=150Ω 10M 100M -360 1M 1G RF=500Ω RL=150Ω 10M Frequency Response for Various CIN- 2pF added 1pF added 2 -2 0pF added AV=2 RF=500Ω RL=150Ω 10M 100M Frequency (Hz) 4 1G Normalized Magnitude (dB) 6 6 -10 1M 1G Frequency Response for Various RL 10 -6 100M Frequency (Hz) Frequency (Hz) Normalized Magnitude (dB) 100M Frequency (Hz) 2 RL=100Ω -2 RL=500Ω RL=150Ω -6 -10 -14 1M AV=2 RF=500Ω 10M 100M 1G Frequency (Hz) FN7193.3 July 26, 2007 EL5293, EL5293A Typical Performance Curves (Continued) Frequency Response for Various CL Frequency Response for Various RF 6 AV=2 RL=150Ω RF=RG=500Ω 10 33pF 340Ω Normalized Magnitude (dB) Normalized Magnitude (dB) 14 22pF 6 15pF 2 8pF -2 620Ω -2 750Ω -6 1.2kΩ -10 0pF -6 1M 10M 100M -14 1M 1G AV=2 RG=RF RL=150Ω 10M Frequency (Hz) Group Delay vs Frequency 1G Frequency Response for Various Common-Mode Input Voltages 6 VCM=3V Normalized Magnitude (dB) 3 AV=2 RF=500Ω 2.5 Delay (ns) 100M Frequency (Hz) 3.5 2 1.5 AV=1 RF=750Ω 1 0.5 0 1M 10M 100M -2 VCM=-3V -6 -10 -14 1M 1G VCM=0V 2 AV=2 RF=500Ω RL=150Ω 10M Frequency (Hz) 100M 1G Frequency (Hz) Transimpedance (ROL) vs Frequency PSRR and CMRR vs Frequency 20 10M Phase 0 0 100k -180 10k Gain -270 1k Phase (°) -90 PSRR/CMRR (dB) 1M Magnitude (Ω) 475Ω 2 PSRR+ -20 PSRR-40 CMRR -60 -360 100 1k 10k 100k 1M 10M Frequency (Hz) 5 100M 1G -80 10k 100k 1M 10M 100M 1G Frequency (Hz) FN7193.3 July 26, 2007 EL5293, EL5293A Typical Performance Curves (Continued) -3dB Bandwidth vs Supply Voltage for Non-Inverting Gains -3dB Bandwidth vs Supply Voltage for Inverting Gains 400 250 RF=750Ω RL=150Ω AV=1 -3dB Bandwidth (MHz) -3dB Bandwidth (MHz) 350 300 250 200 AV=2 150 AV=5 100 200 AV=-1 150 AV=-2 100 AV=-5 50 50 RF=500Ω RL=150Ω AV=10 0 5 0 6 7 8 9 10 5 6 7 Total Supply Voltage (V) 9 10 Peaking vs Supply Voltage for Inverting Gains Peaking vs Supply Voltage for Non-Inverting Gains 4 2.5 RF=750Ω RL=150Ω AV=1 3.5 RF=500Ω RL=150Ω 2 Peaking (dB) 3 Peaking (dB) 8 Total Supply Voltage (V) 2.5 2 1.5 AV=2 1 1.5 AV=-1 1 AV=-2 0.5 0.5 0 5 AV=10 6 7 8 9 0 5 10 6 7 -3dB Bandwidth vs Temperature for Non-Inverting Gains 10 250 RF=750Ω RL=150Ω 400 200 -3dB Bandwidth (MHz) -3dB Bandwidth (MHz) 9 -3dB Bandwidth vs Temperature for Inverting Gains 500 AV=1 300 200 AV=2 100 AV=5 0 -40 8 Total Supply Voltage (V) Total Supply Voltage (V) AV=10 10 60 110 Ambient Temperature (°C) 6 160 AV=-1 AV=-2 150 100 AV=-5 50 0 -40 RF=500Ω RL=150Ω 10 60 110 160 Ambient Temperature (°C) FN7193.3 July 26, 2007 EL5293, EL5293A Typical Performance Curves (Continued) Peaking vs Temperature Voltage and Current Noise vs Frequency 2.5 1k RL=150Ω 2 Voltage Noise (nV/√Hz) Current Noise (pA/√Hz) Peaking (dB) AV=1 1.5 1 0.5 AV=-1 0 -0.5 -40 10 60 110 in+ 100 in10 en 1 100 160 1k 10k 100 10 10 8 Supply Current (mA) Output Impedance (Ω) 1M 10M Supply Current vs Supply Voltage Closed Loop Output Impedance vs Frequency 1 0.1 0.01 0.001 6 4 2 0 100 1k 10k 100k 1M 10M 100M 0 1G 2 4 6 8 10 12 Supply Voltage (V) Frequency (Hz) 2nd and 3rd Harmonic Distortion vs Frequency Two-Tone 3rd Order Input Referred Intermodulation Intercept (IIP3) -20 25 Input Power Intercept (dBm) AV=+2 VOUT=2VP-P RL=100Ω -30 Harmonic Distortion (dBc) 100k Frequency (Hz) Ambient Temperature (°C) -40 2nd Order Distortion -50 3rd Order Distortion -60 -70 -80 -90 1 10 Frequency (MHz) 7 100 20 AV=+2 RL=150Ω 15 10 5 0 -5 -10 10 AV=+2 RL=100Ω 100 Frequency (MHz) FN7193.3 July 26, 2007 EL5293, EL5293A Typical Performance Curves (Continued) Differential Gain/Phase vs DC Input Voltage at 3.58MHz Differential Gain/Phase vs DC Input Voltage at 3.58MHz 0.03 0.04 AV=2 RF=RG=500Ω RL=150Ω dG (%) or dP (°) 0.01 0.02 0 dG -0.01 -0.02 -0.01 -0.04 -0.03 0 0.5 dG 0 -0.02 -0.5 -0.04 -1 1 dP 0.01 -0.03 -0.05 -1 AV=1 RF=750Ω RL=500Ω 0.03 dP dG (%) or dP (°) 0.02 -0.5 DC Input Voltage 0 0.5 1 DC Input Voltage Output Voltage Swing vs Frequency THD<1% Output Voltage Swing vs Frequency THD<0.1% 10 10 Output Voltage Swing (VPP) Output Voltage Swing (VPP) RL=500Ω 8 RL=150Ω 6 4 2 AV=2 0 8 RL=500Ω 6 RL=150Ω 4 2 AV=2 0 1 10 1 100 10 Small Signal Step Response Large Signal Step Response VS=±5V RL=150Ω AV=2 RF=RG=500Ω 200mV/div 100 Frequency (MHz) Frequency (MHz) VS=±5V RL=150Ω AV=2 RF=RG=500Ω 1V/div 10ns/div 8 10ns/div FN7193.3 July 26, 2007 EL5293, EL5293A Typical Performance Curves (Continued) Settling Time vs Settling Accuracy Transimpedance (RoI) vs Temperature 25 625 AV=2 RF=RG=500Ω RL=150Ω VSTEP=5VP-P output 600 15 RoI (kΩ) Settling Time (ns) 20 10 575 550 5 0 0.01 0.1 525 -40 1 10 Settling Accuracy (%) PSRR and CMRR vs Temperature 110 160 110 160 ICMR and IPSR vs Temperature 90 2 80 PSRR ICMR/IPSR (µA/V) 60 50 CMRR 40 ICMR+ 1.5 70 PSRR/CMRR (dB) 60 Die Temperature (°C) 30 1 IPSR 0.5 ICMR- 0 20 10 -40 10 60 110 -0.5 -40 160 10 Die Temperature (°C) 60 Die Temperature (°C) Offset Voltage vs Temperature Input Current vs Temperature 2 60 40 Input Current (µA) VOS (mV) 1 0 -1 20 IB0 -20 IB+ -40 -2 -40 10 60 Die Temperature (°C) 9 110 160 -60 -40 10 60 110 160 Temperature (°C) FN7193.3 July 26, 2007 EL5293, EL5293A Typical Performance Curves (Continued) Positive Input Resistance vs Temperature Supply Current vs Temperature 60 5 50 Supply Current (mA) 4 RIN+ (kΩ) 40 30 20 3 2 1 10 0 -40 60 10 110 0 -40 160 10 Temperature (°C) Positive Output Swing vs Temperature for Various Loads 110 160 Negative Output Swing vs Temperature for Various Loads 4.2 -3.5 4.1 150Ω -3.6 1kΩ 4 -3.7 3.9 VOUT (V) VOUT (V) 60 Temperature (°C) 3.8 3.7 -3.8 -3.9 -4 150Ω 3.6 1kΩ -4.1 3.5 -40 10 60 110 -4.2 -40 160 10 Temperature (°C) 60 110 160 Temperature (°C) Output Current vs Temperature Slew Rate vs Temperature 130 4000 Sink Slew Rate (V/µS) IOUT (mA) 125 Source 120 115 -40 10 60 Die Temperature (°C) 10 110 160 3500 3000 2500 -40 AV=2 RF=RG=500Ω RL=150Ω 10 60 110 160 Die Temperature (°C) FN7193.3 July 26, 2007 EL5293, EL5293A Typical Performance Curves (Continued) Channel-to-Channel Isolation vs Frequency Enable Response 0 Gain (dB) -20 500mV/div -40 -60 5V/div -80 -100 100k 1M 10M 100M 400M 20ns/div Frequency (Hz) Package Power Dissipation vs Ambient Temperature - JEDEC JESD51-3 Low Effective Thermal Conductivity Test Board Disable Response 1 Power Dissipation (W) 0.9 500mV/div 5V/div 0.8 0.7 625mW 0.6 SO8 θJA=160°C/W 486mW 0.5 0.4 0.3 MSOP8/10 θJA=206°C/W 0.2 0.1 0 0 400ns/div 25 50 75 85 100 125 150 Ambient Temperature (°C) Package Power Dissipation vs Ambient Temperature - JEDEC JESD51-7 High Effective Thermal Conductivity Test Board 1 Power Dissipation (W) 909mW 0.8 870mW SO8 θJA=110°C/W 0.6 MSOP8/10 θJA=115°C/W 0.4 0.2 0 0 25 50 75 85 100 125 150 Ambient Temperature (°C) 11 FN7193.3 July 26, 2007 EL5293, EL5293A Pin Descriptions 8 LD SOIC, MSOP 10 LD MSOP PIN NAME 1 9 OUTA FUNCTION EQUIVALENT CIRCUIT Output, channel A VS+ OUT VSCircuit 1 2 10 INA- Inverting input, channel A VS+ IN+ IN- VSCircuit 2 3 1 INA+ Non-inverting input, channel A 2 CEA Chip enable, channel A (see circuit 2) VS+ CE VSCircuit 3 4 3 VS- Negative supply 4 CEB Chip enable, channel B (see circuit 3) 5 5 INB+ Non-inverting input, channel B (see circuit 2) 6 6 INB- Inverting input, channel B (see circuit 2) 7 7 OUTB Output, channel B (see circuit 1) 8 8 VS+ Positive supply Applications Information Product Description The EL5293 is a current-feedback operational amplifier that offers a wide -3dB bandwidth of 300MHz and a low supply current of 4mA per amplifier. The EL5293 works with supply voltages ranging from a single 5V to 10V and they are also capable of swinging to within 1V of either supply on the output. Because of their current-feedback topology, the EL5293 does not have the normal gain-bandwidth product associated with voltage-feedback operational amplifiers. Instead, its -3dB bandwidth to remain relatively constant as closed-loop gain is increased. This combination of high bandwidth and low power, together with aggressive pricing make the EL5293 the ideal choice for many low-power/high-bandwidth applications such as portable, handheld, or battery-powered equipment. 12 For varying bandwidth needs, consider the EL5191 with 1GHz on a 9mA supply current or the EL5192 with 600MHz on a 6mA supply current. Versions include single, dual, and triple amp packages with 5 Ld SOT23, 16 Ld QSOP, and 8 Ld or 16 Ld SOIC outlines. Power Supply Bypassing and Printed Circuit Board Layout As with any high frequency device, good printed circuit board layout is necessary for optimum performance. Low impedance ground plane construction is essential. Surface mount components are recommended, but if leaded components are used, lead lengths should be as short as possible. The power supply pins must be well bypassed to reduce the risk of oscillation. The combination of a 4.7µF tantalum capacitor in parallel with a 0.01µF capacitor has been shown to work well when placed at each supply pin. FN7193.3 July 26, 2007 EL5293, EL5293A For good AC performance, parasitic capacitance should be kept to a minimum, especially at the inverting input. (See the Capacitance at the Inverting Input section) Even when ground plane construction is used, it should be removed from the area near the inverting input to minimize any stray capacitance at that node. Carbon or Metal-Film resistors are acceptable with the Metal-Film resistors giving slightly less peaking and bandwidth because of additional series inductance. Use of sockets, particularly for the SOIC package, should be avoided if possible. Sockets add parasitic inductance and capacitance which will result in additional peaking and overshoot. Disable/Power-Down The EL5293A amplifier can be disabled placing its output in a high impedance state. When disabled, the amplifier supply current is reduced to < 300µA. The EL5293A is disabled when its CE pin is pulled up to within 1V of the positive supply. Similarly, the amplifier is enabled by floating or pulling its CE pin to at least 3V below the positive supply. For ±5V supply, this means that an EL5293A amplifier will be enabled when CE is 2V or less, and disabled when CE is above 4V. Although the logic levels are not standard TTL, this choice of logic voltages allows the EL5293A to be enabled by tying CE to ground, even in 5V single supply applications. The CE pin can be driven from CMOS outputs. Capacitance at the Inverting Input Any manufacturer’s high-speed voltage- or current-feedback amplifier can be affected by stray capacitance at the inverting input. For inverting gains, this parasitic capacitance has little effect because the inverting input is a virtual ground, but for non-inverting gains, this capacitance (in conjunction with the feedback and gain resistors) creates a pole in the feedback path of the amplifier. This pole, if low enough in frequency, has the same destabilizing effect as a zero in the forward open-loop response. The use of largevalue feedback and gain resistors exacerbates the problem by further lowering the pole frequency (increasing the possibility of oscillation). The EL5293 has been optimized with a 475Ω feedback resistor. With the high bandwidth of these amplifiers, these resistor values might cause stability problems when combined with parasitic capacitance, thus ground plane is not recommended around the inverting input pin of the amplifier. Feedback Resistor Values The EL5293 has been designed and specified at a gain of +2 with RF approximately 500Ω. This value of feedback resistor gives 200MHz of -3dB bandwidth at AV = 2 with 2dB of peaking. With AV = -2, an RF of approximately 500Ω gives 175MHz of bandwidth with 0.2dB of peaking. Since the EL5293 is a current-feedback amplifier, it is also possible to change the value of RF to get more bandwidth. As seen in the curve of Frequency Response for Various RF and RG, 13 bandwidth and peaking can be easily modified by varying the value of the feedback resistor. Because the EL5293 is a current-feedback amplifier, its gain-bandwidth product is not a constant for different closedloop gains. This feature actually allows the EL5293 to maintain about the same -3dB bandwidth. As gain is increased, bandwidth decreases slightly while stability increases. Since the loop stability is improving with higher closed-loop gains, it becomes possible to reduce the value of RF below the specified 475Ω and still retain stability, resulting in only a slight loss of bandwidth with increased closed-loop gain. Supply Voltage Range and Single-Supply Operation The EL5293 has been designed to operate with supply voltages having a span of greater than 5V and less than 10V. In practical terms, this means that the EL5293 will operate on dual supplies ranging from ±2.5V to ±5V. With singlesupply, the EL5293 will operate from 5V to 10V. As supply voltages continue to decrease, it becomes necessary to provide input and output voltage ranges that can get as close as possible to the supply voltages. The EL5293 has an input range which extends to within 2V of either supply. So, for example, on +5V supplies, the EL5293 has an input range which spans ±3V. The output range of the EL5293 is also quite large, extending to within 1V of the supply rail. On a ±5V supply, the output is therefore capable of swinging from--4V to +4V. Single-supply output range is larger because of the increased negative swing due to the external pull-down resistor to ground. Video Performance For good video performance, an amplifier is required to maintain the same output impedance and the same frequency response as DC levels are changed at the output. This is especially difficult when driving a standard video load of 150Ω, because of the change in output current with DC level. Previously, good differential gain could only be achieved by running high idle currents through the output transistors (to reduce variations in output impedance.) These currents were typically comparable to the entire 4mA supply current of each EL5293 amplifier. Special circuitry has been incorporated in the EL5293 to reduce the variation of output impedance with current output. This results in dG and dP specifications of 0.03% and 0.04°, while driving 150Ω at a gain of 2. Video performance has also been measured with a 500Ω load at a gain of +1. Under these conditions, the EL5293 has dG and dP specifications of 0.03% and 0.04°. Output Drive Capability In spite of its low 4mA of supply current, the EL5293 is capable of providing a minimum of ±95mA of output current. With a minimum of ±95mA of output drive, the EL5293 is FN7193.3 July 26, 2007 EL5293, EL5293A capable of driving 50Ω loads to both rails, making it an excellent choice for driving isolation transformers in telecommunications applications. Driving Cables and Capacitive Loads When used as a cable driver, double termination is always recommended for reflection-free performance. For those applications, the back-termination series resistor will decouple the EL5293 from the cable and allow extensive capacitive drive. However, other applications may have high capacitive loads without a back-termination resistor. In these applications, a small series resistor (usually between 5Ω and 50Ω) can be placed in series with the output to eliminate most peaking. The gain resistor (RG) can then be chosen to make up for any gain loss which may be created by this additional resistor at the output. In many cases it is also possible to simply increase the value of the feedback resistor (RF) to reduce the peaking. Current Limiting The EL5293 has no internal current-limiting circuitry. If the output is shorted, it is possible to exceed the Absolute Maximum Rating for output current or power dissipation, potentially resulting in the destruction of the device. important to calculate the maximum junction temperature (TJMAX) for the application to determine if power supply voltages, load conditions, or package type need to be modified for the EL5293 to remain in the safe operating area. These parameters are calculated as follows: (EQ. 1) T JMAX = T MAX + ( θ JA × n × PD MAX ) where: TMAX = Maximum ambient temperature θJA = Thermal resistance of the package n = Number of amplifiers in the package PDMAX = Maximum power dissipation of each amplifier in the package PDMAX for each amplifier can be calculated as follows: V OUTMAX PD MAX = ( 2 × V S × I SMAX ) + ( V S - V OUTMAX ) × ---------------------------R L (EQ. 2) where: VS = Supply voltage Power Dissipation With the high output drive capability of the EL5293, it is possible to exceed the +125°C Absolute Maximum junction temperature under certain very high load current conditions. Generally speaking when RL falls below about 25Ω, it is 14 ISMAX = Maximum supply current of 1A VOUTMAX = Maximum output voltage (required) RL = Load resistance FN7193.3 July 26, 2007 EL5293, EL5293A Small Outline Package Family (SO) A D h X 45° (N/2)+1 N A PIN #1 I.D. MARK E1 E c SEE DETAIL “X” 1 (N/2) B L1 0.010 M C A B e H C A2 GAUGE PLANE SEATING PLANE A1 0.004 C 0.010 M C A B L b 0.010 4° ±4° DETAIL X MDP0027 SMALL OUTLINE PACKAGE FAMILY (SO) INCHES SYMBOL SO-14 SO16 (0.300”) (SOL-16) SO20 (SOL-20) SO24 (SOL-24) SO28 (SOL-28) TOLERANCE NOTES A 0.068 0.068 0.068 0.104 0.104 0.104 0.104 MAX - A1 0.006 0.006 0.006 0.007 0.007 0.007 0.007 ±0.003 - A2 0.057 0.057 0.057 0.092 0.092 0.092 0.092 ±0.002 - b 0.017 0.017 0.017 0.017 0.017 0.017 0.017 ±0.003 - c 0.009 0.009 0.009 0.011 0.011 0.011 0.011 ±0.001 - D 0.193 0.341 0.390 0.406 0.504 0.606 0.704 ±0.004 1, 3 E 0.236 0.236 0.236 0.406 0.406 0.406 0.406 ±0.008 - E1 0.154 0.154 0.154 0.295 0.295 0.295 0.295 ±0.004 2, 3 e 0.050 0.050 0.050 0.050 0.050 0.050 0.050 Basic - L 0.025 0.025 0.025 0.030 0.030 0.030 0.030 ±0.009 - L1 0.041 0.041 0.041 0.056 0.056 0.056 0.056 Basic - h 0.013 0.013 0.013 0.020 0.020 0.020 0.020 Reference - 16 20 24 28 Reference - N SO-8 SO16 (0.150”) 8 14 16 Rev. M 2/07 NOTES: 1. Plastic or metal protrusions of 0.006” maximum per side are not included. 2. Plastic interlead protrusions of 0.010” maximum per side are not included. 3. Dimensions “D” and “E1” are measured at Datum Plane “H”. 4. Dimensioning and tolerancing per ASME Y14.5M-1994 15 FN7193.3 July 26, 2007 EL5293, EL5293A Mini SO Package Family (MSOP) 0.25 M C A B D MINI SO PACKAGE FAMILY (N/2)+1 N E MDP0043 A E1 MILLIMETERS PIN #1 I.D. 1 B (N/2) e H C SEATING PLANE 0.10 C N LEADS SYMBOL MSOP8 MSOP10 TOLERANCE NOTES A 1.10 1.10 Max. - A1 0.10 0.10 ±0.05 - A2 0.86 0.86 ±0.09 - b 0.33 0.23 +0.07/-0.08 - c 0.18 0.18 ±0.05 - D 3.00 3.00 ±0.10 1, 3 E 4.90 4.90 ±0.15 - E1 3.00 3.00 ±0.10 2, 3 e 0.65 0.50 Basic - L 0.55 0.55 ±0.15 - L1 0.95 0.95 Basic - N 8 10 Reference - 0.08 M C A B b Rev. D 2/07 NOTES: 1. Plastic or metal protrusions of 0.15mm maximum per side are not included. L1 2. Plastic interlead protrusions of 0.25mm maximum per side are not included. A 3. Dimensions “D” and “E1” are measured at Datum Plane “H”. 4. Dimensioning and tolerancing per ASME Y14.5M-1994. c SEE DETAIL "X" A2 GAUGE PLANE L A1 0.25 3° ±3° DETAIL X All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 16 FN7193.3 July 26, 2007