146 RTI www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors Radial, High Temperature, Low Impedance FEATURES • Very long useful life: 2500 h to 6000 h at 125 °C • High stability, high reliability • Very low ESR • AEC-Q200 qualified • Excellent ripple current capability • Polarized aluminum electrolytic capacitors, non-solid electrolyte • Radial leads, cylindrical aluminum case with pressure relief, insulated with a blue PET sleeve • Charge and discharge proof • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 140 RTM lower Z longer life APPLICATIONS 150 RMI 125 °C • Power supplies (SMPS, DC/DC converters) for industrial, automotive, telecommunications and military • Smoothing, filtering and buffering 146 RTI MARKING QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at 125 °C Useful life at 125 °C Useful life at 40 °C, 1.8 x IR applied Shelf life at 0 V, 125 °C Based on sectional specification Climatic category IEC 60068 VALUE 10 x 12 to 18 x 35 68 μF to 6800 μF ± 20 % 16 V to 63 V -55 °C to +125 °C 2000 h to 5000 h 2500 h to 6000 h 400 000 h 1000 h IEC 60384-4 / EN130300 55/125/56 The capacitors are marked (where possible) with the following information: • Rated capacitance (in μF) • Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) • Rated voltage (in V) • Date code, in accordance with IEC 60062 • Code indicating factory of origin • Logo of manufacturer • Upper category temperature (125 °C) • Negative terminal identification • Series number (146) SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) CR (μF) 68 100 150 220 330 390 470 560 680 820 1000 Revision: 26-Apr-16 16 10 x 12 10 x 16 10 x 20 - 25 10 x 12 10 x 16 10 x 20 12.5 x 20 - UR (V) 35 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 - 50 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 18 x 20 16 x 25 63 10 x 20 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 18 x 20 16 x 25 18 x 25 16 x 31 16 x 35 18 x 31 - Document Number: 28401 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 146 RTI www.vishay.com Vishay BCcomponents SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) CR (μF) 16 12.5 x 20 12.5 x 25 16 x 20 18 x 20 16 x 25 18 x 25 16 x 31 16 x 35 18 x 31 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 UR (V) 35 16 x 20 18 x 20 16 x 25 18 x 25 16 x 31 16 x 35 18 x 31 18 x 35 - 25 12.5 x 25 16 x 20 18 x 20 16 x 25 16 x 31 18 x 25 16 x 35 18 x 31 18 x 35 - 50 18 x 25 16 x 31 16 x 35 18 x 31 18 x 35 - 63 18 x 35 - DIMENSIONS in millimeters AND AVAILABLE FORMS ØD 15 min. Ød 5 min. ØD Ød F F + L L Fig. 2 - Form CA: long leads 4 +1 0 Fig. 3 - Form CB: cut leads Fig. 4 - Form TFA: taped in box (ammopack) Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL CASE CODE Ød Ø Dmax. Lmax. F MASS (g) 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 25 16 x 31 16 x 35 18 x 20 18 x 25 18 x 31 18 x 35 14 15 16 17 18 19a 19 20 21 1820 1825 1831 22 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 10.5 10.5 10.5 13.0 13.0 16.5 16.5 16.5 16.5 18.5 18.5 18.5 18.5 13.5 17.5 22.0 22.0 27.0 22.0 27.0 33.5 37.5 22.0 27.0 33.5 37.5 5.0 ± 0.5 5.0 ± 0.5 5.0 ± 0.5 5.0 ± 0.5 5.0 ± 0.5 7.5 ± 0.5 7.5 ± 0.5 7.5 ± 0.5 7.5 ± 0.5 7.5 ± 0.5 7.5 ± 0.5 7.5 ± 0.5 7.5 ± 0.5 1.6 1.9 2.2 4.0 5.0 6.0 8.0 9.0 11.0 8.0 10.0 12.5 14.5 Revision: 26-Apr-16 PACKAGING QUANTITIES FORM FORM FORM CA CB TFA 1000 500 800 500 500 800 500 500 800 500 500 500 250 250 500 250 250 250 250 250 250 100 100 250 100 100 100 100 250 100 100 250 100 100 250 100 100 - Document Number: 28401 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 146 RTI www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL DESCRIPTION CR Rated capacitance at 100 Hz, tolerance ± 20 % IR Rated RMS ripple current at 100 kHz, 125 °C Max. leakage current after 2 min at UR IL2 tan Max. dissipation factor at 100 Hz Z Max. impedance at 100 kHz Note • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % Electrolytic capacitor 146 RTI series 470 μF / 25 V; ± 20 % Nominal case size: Ø 10 mm x 16 mm; Form TFA Ordering code: MAL214636471E3 Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 16 25 35 CR 100 Hz (μF) 470 680 1000 1500 2200 2700 3300 3900 4700 4700 5600 6800 330 470 680 1000 1500 1800 2700 2700 3300 3900 4700 4700 5600 220 330 470 680 1000 1200 1500 1800 2200 2200 2700 2700 3300 Revision: 26-Apr-16 NOMINAL CASE SIZE ØDxL (mm) IR 100 kHz 125 °C (mA) IL2 2 min (μA) 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 18 x 20 16 x 25 18 x 25 16 x 31 16 x 35 18 x 31 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 18 x 20 16 x 25 16 x 31 18 x 25 16 x 35 18 x 31 18 x 35 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 18 x 20 16 x 25 18 x 25 16 x 31 16 x 35 18 x 31 18 x 35 620 1100 1250 1600 2000 1900 2000 2500 2800 3000 3200 3100 620 1100 1250 1600 2000 1900 2000 2500 3000 2800 3200 3100 3100 620 1100 1250 1600 2000 1900 2000 2500 2800 3000 3200 3100 3100 78 112 163 243 355 435 531 627 755 755 899 1091 85 121 173 253 378 453 678 678 828 978 1178 1178 1403 80 119 168 241 353 423 528 633 773 773 948 948 1158 tan 100 Hz 0.16 0.16 0.16 0.16 0.18 0.18 0.20 0.20 0.22 0.22 0.24 0.24 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.16 0.18 0.18 0.20 0.20 0.22 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.14 0.14 0.16 Z 100 kHz +20 °C () Z 100 kHz -40 °C () 0.120 0.075 0.060 0.043 0.033 0.034 0.033 0.024 0.025 0.021 0.018 0.022 0.120 0.075 0.060 0.043 0.033 0.034 0.033 0.024 0.021 0.025 0.018 0.022 0.019 0.120 0.075 0.060 0.043 0.033 0.034 0.033 0.024 0.025 0.021 0.018 0.022 0.019 0.750 0.450 0.360 0.258 0.198 0.204 0.198 0.144 0.150 0.126 0.108 0.132 0.750 0.450 0.360 0.258 0.198 0.204 0.198 0.144 0.126 0.150 0.108 0.132 0.114 0.750 0.450 0.360 0.258 0.198 0.204 0.198 0.144 0.150 0.126 0.108 0.132 0.114 ORDERING CODE MAL2146....... BULK PACKAGING FORM CA 55471E3 55681E3 55102E3 55152E3 55222E3 55272E3 55332E3 55392E3 55472E3 95475E3 55562E3 55682E3 56331E3 56471E3 56681E3 56102E3 56152E3 56182E3 56272E3 96275E3 56332E3 56392E3 56472E3 96475E3 56562E3 50221E3 50331E3 50471E3 50681E3 50102E3 50122E3 50152E3 50182E3 50222E3 90225E3 50272E3 90275E3 50332E3 FORM CB 65471E3 65681E3 65102E3 65152E3 65222E3 65272E3 65332E3 65392E3 65472E3 95476E3 65562E3 65682E3 66331E3 66471E3 66681E3 66102E3 66152E3 66182E3 66272E3 96276E3 66332E3 66392E3 66472E3 96476E3 66562E3 60221E3 60331E3 60471E3 60681E3 60102E3 60122E3 60152E3 60182E3 60222E3 90226E3 60272E3 90276E3 60332E3 TAPED FORM TFA 35471E3 35681E3 35102E3 35152E3 35222E3 35272E3 35332E3 35392E3 35472E3 95473E3 35682E3 36331E3 36471E3 36681E3 36102E3 36152E3 36182E3 36272E3 96273E3 36332E3 36392E3 96473E3 30221E3 30331E3 30471E3 30681E3 30102E3 30122E3 30152E3 30182E3 30222E3 90223E3 90273E3 - Document Number: 28401 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 146 RTI www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 50 NOMINAL CASE SIZE ØDxL (mm) IR 100 kHz 125 °C (mA) Z 100 kHz +20 °C () Z 100 kHz -40 °C () 100 10 x 12 420 53 220 10 x 16 900 113 0.10 0.190 0.10 0.120 330 10 x 20 1000 168 0.10 470 12.5 x 20 680 12.5 x 25 1250 238 1700 343 820 16 x 20 1650 1000 18 x 20 1000 16 x 25 1200 CR 100 Hz (μF) IL2 2 min (μA) tan 100 Hz ORDERING CODE MAL2146....... BULK PACKAGING TAPED FORM CA FORM CB FORM TFA 1.330 51101E3 61101E3 31101E3 0.720 51221E3 61221E3 31221E3 0.090 0.540 51331E3 61331E3 31331E3 0.10 0.065 0.390 51471E3 61471E3 31471E3 0.10 0.050 0.300 51681E3 61681E3 31681E3 413 0.10 0.047 0.282 51821E3 61821E3 31821E3 1800 503 0.10 0.039 0.234 51102E3 61102E3 31102E3 2100 503 0.10 0.031 0.186 91105E3 91106E3 91103E3 18 x 25 2400 603 0.10 0.030 0.180 51122E3 61122E3 31122E3 1200 16 x 31 2550 603 0.10 0.027 0.162 91125E3 91126E3 91123E3 1500 16 x 35 2800 753 0.10 0.022 0.132 51152E3 61152E3 - 1800 18 x 31 2700 903 0.10 0.026 0.156 51182E3 61182E3 31182E3 2200 18 x 35 3000 1103 0.12 0.022 0.132 51222E3 61222E3 - 68 10 x 12 400 46 0.10 0.360 2.160 58689E3 68689E3 38689E3 100 10 x 16 600 66 0.10 0.220 1.320 58101E3 68101E3 38101E3 150 10 x 20 750 98 0.10 0.150 0.900 58151E3 68151E3 38151E3 220 12.5 x 20 1000 142 0.10 0.098 0.950 58221E3 68221E3 38221E3 330 12.5 x 25 1300 211 0.10 0.076 0.456 58331E3 68331E3 38331E3 390 16 x 20 1250 249 0.10 0.075 0.450 58391E3 68391E3 38391E3 470 18 x 20 1500 299 0.10 0.055 0.330 58471E3 68471E3 38471E3 560 16 x 25 1800 356 0.10 0.048 0.288 58561E3 68561E3 38561E3 680 18 x 25 2100 431 0.10 0.041 0.246 58681E3 68681E3 38681E3 680 16 x 31 2200 431 0.10 0.036 0.216 98685E3 98686E3 98683E3 820 16 x 35 2500 520 0.10 0.029 0.174 58821E3 68821E3 - 1000 18 x 31 2400 633 0.10 0.032 0.192 58102E3 68102E3 38102E3 1200 18 x 35 2600 759 0.10 0.029 0.174 58122E3 68122E3 - 63 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Us 1.15 x UR Surge voltage Urev 0.5 V Reverse voltage Current Leakage current After 2 min at UR IL2 0.01 CR x UR + 3 μA Inductance Equivalent series inductance (ESL) Case Ø D = 10 mm Typ. 16 nH Case Ø D 12.5 mm Typ. 18 nH Calculated from tan max. and CR (see Table 2) ESR = tan /2 f CR Resistance Equivalent series resistance (ESR) Revision: 26-Apr-16 Document Number: 28401 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 146 RTI www.vishay.com Vishay BCcomponents CAPACITANCE (C) 1.2 C C0 C C0 1.2 1.0 1.1 0.8 0.6 1.0 0.4 0.9 0.2 0.8 - 60 - 40 - 20 0.0 0 20 40 60 80 100 120 140 10 100 10 000 1000 T (°C) 100 000 f (Hz) Fig. 5 - Typical multiplier of capacitance at 100 Hz as a function of temperature (C0 = C at 20 °C) Fig. 6 - Typical multiplier of capacitance as a function of frequency at 20 °C (C0 = C at 100 Hz) EQUIVALENT SERIES RESISTANCE (ESR) 100 5 ESR ESR0 ESR ESR0 4 10 3 2 1 1 0.1 - 60 - 40 - 20 0 0 20 40 60 80 100 120 140 10 100 1000 100 000 10 000 T (°C) f (Hz) Fig. 7 - Typical multiplier of ESR at 100 Hz as a function of temperature (ESR0 = ESR at 20 °C) Fig. 8 - Typical multiplier of ESR at 20 °C as a function of frequency (ESR0 = ESR at 100 Hz) IMPEDANCE (Z) 100 100 Z Z0 Curve 1: Curve 2: Curve 3: Curve 4: Curve 5: Curve 6: Curve 7: Z (Ω) 10 1 10 1 220 µF, 35V, 10 x 12 330 µF, 35 V, 10 x 16 470 µF, 35 V, 10 x 20 680 µF, 35 V, 12.5 x 20 1000 µF, 35 V, 12.5 x 25 1800 µF, 35 V, 16 x 25 3300 µF, 35 V, 18 x 35 2 3 4 5 6 7 1 0.1 0.1 - 60 - 40 - 20 0 20 40 60 80 100 120 140 T (°C) Fig. 9 - Typical multiplier of impedance at 100 kHz as a function of temperature (Z0 = Z at 20 °C) Revision: 26-Apr-16 0.01 10 100 1000 10 000 100 000 f (Hz) Fig. 10 - Typical impedance Z at 20 °C as a function of frequency Document Number: 28401 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 146 RTI www.vishay.com Vishay BCcomponents 1000 Curve 1: Curve 2: Curve 3: Curve 4: Curve 5: Curve 6: Curve 7: Curve 8: Z (Ω) 100 1 2 3 4 5 6 7 8 10 1 68 µF, 63 V, 10 x 12 100 µF, 63 V, 10 x 16 150 µF, 63 V, 10 x 20 220 µF, 63 V, 12.5 x 20 330 µF, 63 V, 12.5 x 25 560 µF, 63 V, 16 x 25 680 µF, 63 V, 16 x 31 1000 µF, 63 V, 18 x 31 0.1 0.01 10 100 1000 10 000 100 000 f (Hz) Fig. 11 - Typical impedance Z at 20 °C as a function of frequency Table 3 ENDURANCE TEST DURATION AND USEFUL LIFE AS A FUNCTION OF CASE SIZE NOMINAL CASE SIZE ØDxL (mm) CASE CODE ENDURANCE AT 125 °C (h) USEFUL LIFE AT 125 °C (h) 10 x 12 14 2000 2500 10 x 16 15 2000 2500 10 x 20 16 2000 3000 12.5 x 20 17 2000 3000 12.5 x 25 18 3000 5000 16 x 20 19a 3000 4000 16 x 25 19 3000 5000 16 x 31 20 4000 6000 16 x 35 21 5000 6000 18 x 20 1820 3000 4000 18 x 25 1825 3000 5000 18 x 31 1831 4000 6000 18 x 35 22 5000 6000 Revision: 26-Apr-16 Document Number: 28401 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 146 RTI www.vishay.com Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE MBC242 IA 4.3 IR 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 Lifetime multiplier 2.8 0 1. 5 1. 2.6 0 2. 0 3. 0 4. 2.4 0 6. 0 8. 2.2 2.0 12 60 0 10 Useful life at 125 °C and IR applied; see Table 4 (1) 0 40 1.4 1.2 1.0 0.8 0.5 0.0 40 30 1.6 0 20 (1) 20 1.8 IA = Actual ripple current at 100 kHz IR = Rated ripple current at 100 kHz, 125 °C 50 60 70 80 90 100 110 120 130 Tamb (°C) Fig. 12 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 4 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) IR MULTIPLIER UR = 16 V to 25 V UR = 35 V UR = 50 V to 63 V 50 0.60 0.50 0.35 100 0.70 0.65 0.50 300 0.85 0.80 0.65 1000 0.90 0.85 0.80 3000 0.95 0.90 0.90 10 000 1.00 0.95 0.90 100 000 1.00 1.00 1.00 Revision: 26-Apr-16 Document Number: 28401 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 146 RTI www.vishay.com Vishay BCcomponents Table 5 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance REFERENCE IEC 60384-4 / EN130300 subclause 4.13 PROCEDURE (quick reference) REQUIREMENTS Tamb = 125 °C; UR applied; for test duration see Table 3 C/C: ± 15 % tan 1.3 x spec. limit Z 2 x spec. limit IL2 spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 125 °C; UR and IR applied; for test duration see Table 3 C/C: ± 30 % tan 3 x spec. limit Z 3 x spec. limit IL2 spec. limit no short or open circuit total failure percentage: 1 % Shelf life IEC 60384-4 / EN130300 subclause 4.17 Tamb = 125 °C; no voltage applied; 1000 h after test: UR to be applied for 30 min, 24 h o 48 h before measurement C/C: ± 15 % tan 1.3 x spec. limit Z 3 x spec. limit IL2 spec. limit Revision: 26-Apr-16 Document Number: 28401 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000