MMBZ5225 to MMBZ5267 www.vishay.com Vishay Semiconductors Small Signal Zener Diodes FEATURES • Silicon planar power Zener diodes 3 • Standard Zener voltage tolerance is ± 5 % with a “B” suffix (e.g.: MMBZ5225B), suffix “C” is ± 2 % tolerance. 1 2 • High temperature soldering guaranteed: 260 °C/4 x 10 s at terminals • AEC-Q101 qualified • ESD capability according to AEC-Q101: Human body model > 8 kV Machine model > 800 V PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT VZ range nom. 3 to 75 V Test current IZT 1.7 to 20 mA VZ specification Thermal equilibrium Int. construction Single • Base P/N-E3 - RoHS-compliant, commercial grade • Base P/N-HE3 - RoHS-compliant, AEC-Q101 qualified • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY 3000 (8 mm tape on 7" reel) 15 000/box 10 000 (8 mm tape on 13" reel) 10 000/box MMBZ5225B-E3-08 to MMBZ5267B-E3-08 MMBZ5225C-E3-08 to MMBZ5267C-E3-08 MMBZ5225B-HE3-08 to MMBZ5267B-HE3-08 MMBZ5225 to MMBZ5267 MMBZ5225C-HE3-08 to MMBZ5267C-HE3-08 MMBZ5225B-E3-18 to MMBZ5267B-E3-18 MMBZ5225C-E3-18 to MMBZ5267C-E3-18 MMBZ5225B-HE3-18 to MMBZ5267B-HE3-18 MMBZ5225C-HE3-18 to MMBZ5267C-HE3-18 PACKAGE PACKAGE NAME SOT-23 WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS 8.8 mg UL 94 V-0 MSL level 1 (according J-STD-020) 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE On FR - 5 board using recommended solder pad layout Ptot 225 mW On alumina substrate Ptot 300 mW RthJA 556 K/W Tj 150 °C Storage temperature range Tstg - 65 to + 150 °C Operating temperature range Top - 55 to + 150 °C Power dissipation Zener current Thermal resistance, junction to ambient air Junction temperature Rev. 1.7, 11-Feb-13 UNIT See table “Electrical Characteristics” On FR - 5 board using recommended solder pad layout Document Number: 85772 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MMBZ5225 to MMBZ5267 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE (1) PART NUMBER MARKING CODE VZ at IZT1 V NOM. TEST CURRENT IZT1 REVERSE LEAKAGE CURRENT IZT2 mA IR at VR μA MAX. DYNAMIC RESISTANCE (2) ZZ at IZT1 ZZK at IZT2 V MAX. TEMPERATURE COEFFICIENT VZ %/°C MAX. TYP. MMBZ5225 18E 3 20 0.25 50 1 30 1600 - 0.075 MMBZ5226 8A 3.3 20 0.25 25 1 28 1600 - 0.07 MMBZ5227 8B 3.6 20 0.25 15 1 24 1700 - 0.065 MMBZ5228 8C 3.9 20 0.25 10 1 23 1900 - 0.06 MMBZ5229 8D 4.3 20 0.25 5 1 22 2000 - 0.055 MMBZ5230 8E 4.7 20 0.25 5 2 19 1900 ± 0.030 MMBZ5231 8F 5.1 20 0.25 5 2 17 1600 ± 0.030 MMBZ5232 8G 5.6 20 0.25 5 3 11 1600 0.038 MMBZ5233 8H 6 20 0.25 5 3.5 7 1600 0.038 MMBZ5234 8J 6.2 20 0.25 5 4 7 1000 0.045 MMBZ5235 8K 6.8 20 0.25 3 5 5 750 0.05 MMBZ5236 8L 7.5 20 0.25 3 6 6 500 0.058 MMBZ5237 8M 8.2 20 0.25 3 6.5 8 500 0.062 MMBZ5238 8N 8.7 20 0.25 3 6.5 8 600 0.065 MMBZ5239 8P 9.1 20 0.25 3 7 10 600 0.068 MMBZ5240 8Q 10 20 0.25 3 8 17 600 0.075 MMBZ5241 8R 11 20 0.25 2 8.4 22 600 0.076 MMBZ5242 8S 12 20 0.25 1 9.1 30 600 0.077 MMBZ5243 8T 13 9.5 0.25 0.5 9.9 13 600 0.079 MMBZ5244 8U 14 9 0.25 0.1 10 15 600 0.082 MMBZ5245 8V 15 8.5 0.25 0.1 11 16 600 0.082 MMBZ5246 8W 16 7.8 0.25 0.1 12 17 600 0.083 MMBZ5247 8X 17 7.4 0.25 0.1 13 19 600 0.084 MMBZ5248 8Y 18 7 0.25 0.1 14 21 600 0.085 MMBZ5249 8Z 19 6.6 0.25 0.1 14 23 600 0.086 MMBZ5250 81A 20 6.2 0.25 0.1 15 25 600 0.086 MMBZ5251 81B 22 5.6 0.25 0.1 17 29 600 0.087 MMBZ5252 81C 24 5.2 0.25 0.1 18 33 600 0.087 MMBZ5253 81D 25 5 0.25 0.1 19 35 600 0.089 MMBZ5254 81E 27 4.6 0.25 0.1 21 41 600 0.09 MMBZ5255 81F 28 4.5 0.25 0.1 21 44 600 0.091 MMBZ5256 81G 30 4.2 0.25 0.1 23 49 600 0.091 MMBZ5257 81H 33 3.8 0.25 0.1 25 58 700 0.092 MMBZ5258 81J 36 3.4 0.25 0.1 27 70 700 0.093 MMBZ5259 81K 39 3.2 0.25 0.1 30 80 800 0.094 MMBZ5260 18F 43 3 0.25 0.1 33 93 900 0.095 MMBZ5261 81M 47 2.7 0.25 0.1 36 105 1000 0.095 MMBZ5262 81N 51 2.5 0.25 0.1 39 125 1100 0.096 MMBZ5263 81P 56 2.2 0.25 0.1 43 150 1300 0.096 MMBZ5264 81Q 60 2.1 0.25 0.1 46 170 1400 0.097 MMBZ5265 81R 62 2 0.25 0.1 47 185 1400 0.097 MMBZ5266 81S 68 1.8 0.25 0.1 52 230 1600 0.097 MMBZ5267 81T 75 1.7 0.25 0.1 56 270 1700 0.098 Notes • Maximum VF = 0.9 V, at IF = 10 mA (1) Measured at thermal equilibrium (2) The Zener impedance is derived from the 1 kHz AC voltage which results when an AC current having an RMS value equal to 10 % of the Zener current (IZT1 or IZT2) is superimposed on IZT1 or IZT2. Zener Impedance is measured at two points to insure a sharp knee on the breakdown curve and to eliminate unstable units Rev. 1.7, 11-Feb-13 Document Number: 85772 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MMBZ5225 to MMBZ5267 www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) mA 103 mW 250 102 IF Ptot 10 200 TJ = 100 °C 1 150 10-1 TJ = 25 °C 100 10-2 10-3 50 10-4 10-5 0 0 0.2 0.4 0.6 0.8 1V VF 18114 0 100 Fig. 1 - Forward Characteristics 200 °C Tamb 18672 Fig. 2 - Admissible Power Dissipation vs. Ambient Temperature PACKAGE DIMENSIONS in millimeters (inches): SOT-23 1.15 (0.045) o8 ° 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.1 (0.004) max. 0.550 ref. (0.022 ref.) 0.9 (0.035) 3.1 (0.122) 2.8 (0.110) 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0° t 0.5 (0.020) 0.45 (0.018) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) Foot print recommendation: 1 (0.039) 0.9 (0.035) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 Rev. 1.7, 11-Feb-13 0.9 (0.035) 0.7 (0.028) 2 (0.079) 1.43 (0.056) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 1 (0.039) 0.9 (0.035) 0.95 (0.037) 0.95 (0.037) Document Number: 85772 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000