SCHOTTKY BARRIER RECTIFIER SRF3020C THRU SRF30200C VOLTAGE RANGE 20 to 200 Volts CURRENT 30.0 Amperes FEATURES • • • • • • Plastic package has Underwriters Laboratory Flammability classification 94V-O utilizing Flame Retardant Epoxy Molding Compound Exceeds environmental standards of MILS-19500/228 Low power loss,high efficiency Low forward voltage, high current capability High surge capacity For use in low voltage, high frequency inverters. Free wheeling, and polarity protection applications ITO-220AB MECHANICAL DATA • • • • • Case: ITO-220AB full molded Plastic package Terminals: lead solderable per MIL-STD-202, Method 208 Polarity: as marked Mounting position: Any Weight: 0.08ounce, 2.24 grams Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current At Tc=90℃ Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 15.0A per element Maximum DC Reverse Current at rated DC Blocking Voltage per element TC = 25℃ TC = 100℃ Typical Junction Capacitance(Note2) Typical Thermal Resistance (Note 1) Operating and Storage Temperature Range SRF3 SYMBOLS SRF SRF SRF SRF SRF SRF SRF SRF SRF3 SRF3 3020C 3030C 3035C 3040C 3045C 3050C 3060C 3080C 0100C 0150C 00200 C VRRM VRMS VDC 20 14 20 30 21 30 35 25 35 40 28 40 45 32 45 50 35 50 60 42 60 80 56 80 100 70 100 150 105 150 200 140 200 UNIT Volts Volts Volts I(AV) 30.0 Amps IFSM 200 Amps VF 0.65 IR CJ RθJC TJ TSTG Notes: 1. Thermal Resistance Junction to Ambient 2. Measured at VR=4v and f=1MHz Web Site: www.hkmic.com 0.72 0.75 1.0 100 500 2.0 (-55 to +150) 0.85 Volts mA pF ℃/W ℃ SCHOTTKY BARRIER RECTIFIER SRF3020C THRU SRF30200C VOLTAGE RANGE 20 to 200 Volts CURRENT 30.0 Ampere RATING AND CHRACTERISTIC CURVES SRF3020C THRU SRF30200C FIG.3-TYPICAL INSTANTANEOUS FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 12 6 50 100 150 CASE TEMPERATRUE (℃) 20 10 8 6 4 AMPERES 18 0 20,30V INSTNTANCEOUS FORW ARD CURRENT, AMPERES AVERAGE FORWARD CURRENT, 24 0 FORWARD CHARACTERSTIC 40 30 80-200V 35,40.45V 2 50,60V 1.0 0.8 0.6 Tj =25℃ Pulse Width=200μs 0.4 0.2 0.1 0.4 0.5 0.6 0.7 0.8 0.9 1.1 1.0 INSTANTANEOUS FORWART VOLTAGE,VOLTS FIG.4-MAXIMUM NON-REPETITIVE SURGE CURRENT 200 FIG.2-TYPICAL REVERSE CHARACTERISTICS 8.3ms Single Half Sine-Wave JEDEC Method 100 10 100 50 TC=75℃ 0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60 Hz 1.0 FIG.5-TYPICAL JUNCTION CAPACITANCE TC=25℃ 400 0.1 CAPACITANCE,pF INSTANTANEOUS REVERSE CURRENT, MILIAMPERES TC=100℃ CURRENT,AMPERES PEAK FORWARD SURGE 150 350 300 250 TJ =25℃ 200 0.01 0 100 120 200 300 150 REVERSE VOLTAGE VOLTS 1 2 5 10 20 50 100 REVERSE VOLTAGE,VOLTS Web Site: www.hkmic.com 200 500