156 PUM-SI www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors Power Ultra Miniature Snap-In FEATURES 056/057 PSM-SI miniaturized 156 PUM-SI high voltage 157 PUM-SI QUICK REFERENCE DATA VALUE Nominal case size (Ø D x L in mm) 1000 μF to 22 000 μF Tolerance on CR ± 20 % Rated voltage range, UR Category temperature range 10 V to 100 V -40 °C to +85 °C Endurance test at 85 °C 2000 h Useful life at 85 °C 5000 h Useful life at 40 °C and 1.4 x IR applied 90 000 h Shelf life at 0 V, 85 °C 500 h Based on sectional specification IEC 60384-4/EN130300 Climatic category IEC 60068 General purpose, industrial and audio/video systems Smoothing and filtering Standard and switched mode power supplies Energy storage in pulse systems MARKING 22 x 25 to 35 x 60 Rated capacitance range (E6 series), CR APPLICATIONS • • • • Fig. 1 DESCRIPTION • Long useful life: 5000 h at 85 °C • Low ESR • Polarized aluminum electrolytic capacitors, non-solid electrolyte • Large types, very small dimensions, cylindrical aluminum case, insulated with a blue sleeve • Charge and discharge proof • High ripple current capability • Keyed polarity version available • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 40/085/56 The capacitors are marked (where possible) with the following information: • Rated capacitance (in μF) • Tolerance code on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) • Rated voltage (in V) • Date code (YYMM) • Name of manufacturer • Code for factory of origin • “-” sign to identify the negative terminal, visible from the top and side of the capacitor • Code number • Climatic category in accordance with IEC 60068 SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) UR (V) CR (μF) 16 25 40 50 63 80 100 1000 - - - - - - 22 x 30 1200 - - - - - - 22 x 35 1500 - - - - 22 x 25 22 x 30 25 x 30 1800 - - - - 25 x 25 - - - - - 22 x 25 22 x 30 25 x 30 25 x 40 - - - - 25 x 25 - 30 x 30 - - 22 x 25 - 25 x 30 - 30 x 35 - - 22 x 30 22 x 30 25 x 35 25 x 40 30 x 40 - - 25 x 25 - - - 35 x 30 2200 2700 3300 3900 4700 Revision: 26-Apr-16 - - - 25 x 30 25 x 40 - - - - 25 x 30 25 x 35 22 x 50 30 x 40 30 x 50 - 22 x 25 - - 30 x 30 - 35 x 40 Document Number: 28337 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 156 PUM-SI www.vishay.com Vishay BCcomponents SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) UR (V) CR (μF) 16 25 40 50 63 80 5600 - 25 x 25 - 25 x 40 30 x 35 - - 6800 - - 25 x 40 30 x 30 30 x 40 30 x 50 35 x 50 100 8200 - - 30 x 30 30 x 35 30 x 50 - 35 x 60 10 000 25 x 30 22 x 40 30 x 35 30 x 40 35 x 40 35 x 50 - 12 000 15 000 - 25 x 40 30 x 40 30 x 50 35 x 50 - - 25 x 40 30 x 35 30 x 50 - 35 x 60 - - 30 x 30 - - - - - - 18 000 - 30 x 40 35 x 40 35 x 50 - - - 22 000 30 x 35 - 35 x 50 35 x 60 - - - 27 000 - 35 x 40 - - - - - 39 000 35 x 40 - - - - - - DIMENSIONS in millimeters AND AVAILABLE FORMS TWO TERMINAL SNAP-IN ØD + Terminal L L + 2 max. 10 ± 0.1 - Terminal 5.8 +- 10 mm Bottom view The minus terminal can be marked with a black dot or with an imprinted “-” sign. Fig. 2 - Two terminal snap-in Ø 2 ± 0.1 (2 x) Fig. 3 - Mounting hole diagram THREE TERMINAL SNAP-IN Ø 2 ± 0.1 (2 x) Ø 2.5 ± 0.1 ØD 10 ± 0.1 + Terminal L L + 2 max. - Terminal 3.3 ± 0.1 Minus pole marking Bottom view 4 ± 0.5 The negative terminal has TWO pins which are BOTH electrically connected. Fig. 4 - Three terminal snap-in Revision: 26-Apr-16 4.75 ± 0.1 The 10 mm spacing of the 2 pin snap-in is used as the base layout and a third hole is added. The third hole is closer to the negative primary hole so that polarization is always maintained, together with added mechanical stability. Fig. 5 - Mounting hole diagram Document Number: 28337 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 156 PUM-SI www.vishay.com Vishay BCcomponents Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL Ø Dmax. (mm) Lmax. (mm) 22 x 25 23 27 12 100 260 x 250 x 39 22 x 30 23 32 16 100 260 x 250 x 44 MASS (g) PACKAGING QUANTITIES (units per box) CARDBOARD BOX DIMENSIONS LxWxH 22 x 35 23 37 20 100 260 x 250 x 49 22 x 40 23 42 23 100 260 x 250 x 54 22 x 50 23 52 29 100 260 x 250 x 64 25 x 25 26 27 20 100 290 x 280 x 39 25 x 30 26 32 22 100 290 x 280 x 44 25 x 35 26 37 24 100 290 x 280 x 49 25 x 40 26 42 27 100 290 x 280 x 54 30 x 30 31 32 30 100 340 x 330 x 44 30 x 35 31 37 35 100 340 x 330 x 49 30 x 40 31 42 42 100 340 x 330 x 54 30 x 50 31 52 52 100 340 x 330 x 64 35 x 30 36 32 40 50 390 x 198 x 44 35 x 40 36 42 55 50 390 x 198 x 54 35 x 50 36 52 72 50 390 x 198 x 64 35 x 60 36 62 84 50 390 x 198 x 74 ORDERING EXAMPLE ELECTRICAL DATA SYMBOL CR Rated capacitance at 100 Hz IR Rated RMS ripple current at 100 Hz and 85 °C IL1 Max. leakage current after 1 min at UR ESR Z Electrolytic capacitor 156 series 1000 μF/25 V; ± 20 % Nominal case size: Ø 25 x 40 mm DESCRIPTION 2-terminal snap-in: Ordering code: MAL2 156 26123 E3 Former 12NC: 2222 156 26123 Max. equivalent series resistance at 100 Hz Max. impedance at 10 kHz Note • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % 3-terminal snap-in: Ordering code: MAL2 156 66123 E3 Former 12NC: 2222 156 66123 Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 16 25 CR 100 Hz (μF) NOMINAL CASE SIZE ØDxL (mm) IR 100 Hz 85 °C (A) IL5 5 min (μA) MAX. ESR 100 Hz (m) MAX. Z 10 kHz (m) 2-TERM. 3-TERM. 10 000 25 x 30 3.93 324 49 33 25103E3 65103E3 15 000 25 x 40 4.98 484 36 26 35153E3 75153E3 18 000 30 x 30 4.12 580 53 33 35183E3 75183E3 22 000 30 x 35 4.71 708 44 29 25223E3 65223E3 39 000 35 x 40 5.17 1252 45 26 25393E3 65393E3 4700 22 x 25 2.37 239 100 90 16472E3 56472E3 5600 25 x 25 3.03 284 74 46 26562E3 66562E3 10 000 22 x 40 4.40 504 41 27 16103E3 56103E3 12 000 25 x 40 4.73 604 40 27 26123E3 66123E3 15 000 30 x 35 4.55 754 47 31 26153E3 66153E3 18 000 30 x 40 5.06 904 41 27 16183E3 56183E3 27 000 35 x 40 5.04 1354 47 27 26273E3 66273E3 Revision: 26-Apr-16 ORDERING CODE MAL2156....... Document Number: 28337 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 156 PUM-SI www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 40 50 63 80 100 CR 100 Hz (μF) 2700 3300 3300 4700 6800 8200 10 000 12 000 15 000 18 000 22 000 2200 3300 3900 4700 5600 6800 8200 10 000 12 000 18 000 22 000 1500 1800 2200 2200 2700 3300 3900 4700 4700 5600 6800 6800 8200 10 000 12 000 15 000 1500 2200 3300 4700 6800 10 000 1000 1200 1500 2200 2200 2700 3300 3300 4700 4700 6800 8200 Revision: 26-Apr-16 NOMINAL CASE SIZE ØDxL (mm) 22 x 25 22 x 30 25 x 25 25 x 30 25 x 40 30 x 30 30 x 35 30 x 40 30 x 50 35 x 40 35 x 50 22 x 25 22 x 30 25 x 30 25 x 35 25 x 40 30 x 30 30 x 35 30 x 40 30 x 50 35 x 50 35 x 60 22 x 25 25 x 25 22 x 30 25 x 25 25 x 30 25 x 35 25 x 40 22 x 50 30 x 30 30 x 35 30 x 40 35 x 30 30 x 50 35 x 40 35 x 50 35 x 60 22 x 30 25 x 30 25 x 40 30 x 40 30 x 50 35 x 50 22 x 30 22 x 35 25 x 30 25 x 40 30 x 30 30 x 35 30 x 40 35 x 30 30 x 50 35 x 40 35 x 50 35 x 60 IR 100 Hz 85 °C (A) 2.47 2.98 2.69 3.32 4.26 3.49 4.02 4.49 5.39 4.39 5.34 2.34 2.92 3.17 3.64 4.09 3.35 3.88 4.32 5.23 5.18 5.97 2.13 2.37 2.66 2.42 2.95 3.39 3.81 4.26 3.25 3.75 4.19 3.28 5.05 4.23 5.15 5.89 1.83 2.23 2.92 3.44 4.18 4.51 1.72 1.98 2.12 2.77 2.55 2.94 3.32 2.84 4.04 3.67 4.39 5.21 ORDERING CODE MAL2156....... IL5 5 min (μA) MAX. ESR 100 Hz (m) MAX. Z 10 kHz (m) 2-TERM. 3-TERM. 220 268 268 380 548 660 804 964 1204 1444 1764 224 334 394 474 564 684 824 1004 1204 1804 2204 193 231 281 281 344 420 495 596 596 710 861 861 1037 1264 1516 1894 244 356 532 756 1092 1604 204 244 304 444 444 544 664 664 944 944 1364 1644 97 74 93 68 49 74 60 52 41 62 47 107 76 74 62 53 79 65 56 43 50 51 128 120 92 115 86 71 61 50 85 69 59 97 46 67 51 52 318 230 155 121 88 74 338 282 239 164 181 148 123 147 90 102 76 63 57 43 58 44 33 44 38 33 28 33 28 62 46 47 40 35 48 40 35 29 29 46 68 69 50 70 51 43 37 30 53 45 39 53 32 39 32 47 308 224 152 119 87 73 312 261 223 154 171 140 116 140 86 98 73 61 17272E3 27332E3 17332E3 27472E3 37682E3 37822E3 17103E3 17123E3 37153E3 17183E3 27223E3 11222E3 11332E3 21392E3 21472E3 21562E3 21682E3 21822E3 11103E3 11123E3 11183E3 11223E3 18152E3 18182E3 18222E3 28222E3 28272E3 28332E3 28392E3 18472E3 38472E3 28562E3 18682E3 28682E3 38822E3 18103E3 18123E3 18153E3 12152E3 22222E3 22332E3 12472E3 12682E3 12103E3 19102E3 29122E3 29152E3 29222E3 39222E3 29272E3 19332E3 29332E3 19472E3 29472E3 19682E3 19822E3 57272E3 67332E3 57332E3 67472E3 77682E3 77822E3 57103E3 57123E3 77153E3 57183E3 67223E3 51222E3 51332E3 61392E3 61472E3 61562E3 61682E3 61822E3 51103E3 51123E3 51183E3 51223E3 58152E3 58182E3 58222E3 68222E3 68272E3 68332E3 68392E3 58472E3 78472E3 68562E3 58682E3 68682E3 78822E3 58103E3 58123E3 58153E3 52152E3 62222E3 62332E3 52472E3 52682E3 52103E3 59102E3 59122E3 69152E3 69222E3 79222E3 69272E3 59332E3 69332E3 59472E3 69472E3 59682E3 59822E3 Document Number: 28337 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 156 PUM-SI www.vishay.com Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Surge voltage Us = 1.15 x UR Urev 1 V Reverse voltage Current Leakage current After 1 min at UR IL1 0.006 CR x UR + 4 μA After 5 min at UR IL5 0.002 CR x UR + 4 μA Inductance Equivalent series inductance (ESL) Typ. 19 nH All case sizes Max. 25 nH RIPPLE CURRENT AND USEFUL LIFE MGA453 2.4 2.3 IA IR 2.2 2.1 2.0 1.9 1.8 1 1.7 life multiplier 2 1. 5 1. 1.6 2 2. 1.5 5 3 4 1.4 5 1.3 8 10 1.2 15 20 1.1 0.8 45 60 IA = Actual ripple current at 100 Hz IR = Rated ripple current at 100 Hz and 85 °C (1) Useful life at 85 °C and IR applied: 5000 h (1) 30 1.0 0.5 0.0 40 50 60 70 80 90 Tamb (°C) Fig. 6 - Multiplier of useful life as a function of ambient temperature and ripple current load Revision: 26-Apr-16 Document Number: 28337 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 156 PUM-SI www.vishay.com Vishay BCcomponents Table 3 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY IR MULTIPLIER FREQUENCY (Hz) UR = 10 V TO 25 V UR = 40 V TO 100 V 50 0.93 0.91 100 1.00 1.00 200 1.04 1.05 400 1.07 1.09 1000 1.11 1.13 2000 1.13 1.15 4000 1.15 1.18 10 000 1.18 1.22 Table 4 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE PROCEDURE (quick reference) REQUIREMENTS C/C: ± 15 % Endurance IEC 60384-4 / EN130300 subclause 4.13 Tamb = 85 °C; UR applied: 2000 h ESR 1.3 x spec. limit Z 2 x spec. limit IL5 spec. limit C/C: ± 15 % ESR 3 x spec. limit Useful life CECC 30301 subclause 1.8.1 Z 3 x spec. limit Tamb = 85 °C; UR and IR applied: 5000 h IL5 spec. limit no short or open circuit, no visible damage total failure percentage: 1 % Shelf life (storage at high temperature) Revision: 26-Apr-16 IEC 60384-4 / EN130300 subclause 4.17 Tamb = 85 °C; no voltage applied; 500 h C/C: ± 10 % After test: UR to be applied for 30 min, 24 h to 48 h before measurement ESR 1.2 x spec. limit IL5 2 x spec. limit Document Number: 28337 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000