106 PED-ST www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors, Power Eurodin, Screw Terminals FEATURES 101/102 PHR-ST higher CV/volume 106 PED-ST APPLICATIONS Fig. 1 • • • • QUICK REFERENCE DATA DESCRIPTION Nominal case size (Ø D x L in mm) Rated capacitance range (E6 series), CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at 85 °C Useful life at 85 °C Shelf life at 0 V, 85 °C Based on sectional specification Climatic category IEC 60068 • Very long useful life: 20 000 h at 85 °C • Extremely low ESR and ESL allowing very high ripple current load • High resistance to shock and vibration • Polarized aluminum electrolytic capacitors, non-solid electrolyte • Large types, cylindrical aluminum case, insulated with a blue sleeve • Also available in bolt version (106 PED-STB) • Pressure relief in the sealing • Charge and discharge proof • High reliability • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 VALUE 35 x 60 to 90 x 220 1000 μF to 330 000 μF -10 % to +30 % 25 V to 100 V -40 °C to +85 °C 8000 h 20 000 h 500 h IEC 60384-4 / EN130300 40/085/56 Computer, telecommunications, and industrial systems Smoothing and filtering Standard and switched mode power supplies Energy storage in pulse systems MARKING The capacitors are marked with the following information: • Rated capacitance (in μF) • Tolerance on rated capacitance, code letter in accordance with IEC 60062 (Q for -10 %/+30 %) • Rated voltage (in V) • Date code (YYMM) • Name of manufacturer • Code for factory of origin • “-” sign to identify the negative terminal, visible from the top and side of the capacitor • Code number • Climatic category in accordance with IEC 60068 • “LL” for long life grade SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) CR (μF) 1000 1500 2200 3300 4700 6800 10 000 15 000 22 000 33 000 47 000 68 000 100 000 150 000 220 000 330 000 Revision: 26-Apr-16 UR (V) 25 35 x 60 35 x 60 35 x 80 35 x 105 50 x 80 50 x 105 65 x 105 65 x 105 76 x 105 76 x 146 76 x 220 90 x 146 90 x 220 40 35 x 60 35 x 60 35 x 80 35 x 105 50 x 80 50 x 105 65 x 105 65 x 105 76 x 105 76 x 146 76 x 220 90 x 146 90 x 220 - 63 35 x 60 35 x 60 35 x 80 35 x 105 50 x 80 50 x 105 65 x 105 65 x 105 76 x 105 76 x 146 76 x 220 90 x 220 - 100 35 x 60 35 x 60 35 x 80 35 x 105 50 x 80 50 x 105 65 x 105 65 x 105 76 x 105 76 x 146 76 x 220 90 x 220 - Document Number: 28384 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 106 PED-ST www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS Safety Vent Lt Thread M x S Mb L lb d1 D P A D B H T Fig. 2 A: standard M5 disc: Screw Terminal (ST) and Screw Terminal Bolt nut (STB) Safety Vent Lt Thread M x S Mb L lb d1 P B D D B H T Fig. 2 B: high current M6 disc: Screw Terminal (ST) and Screw Terminal Bolt nut (STB) Note • Maximum permissible torque which may be applied to the termination screws: 2 Nm for M5; 2.5 Nm for M6 For accessories refer to document “Mounting Accessories”, see www.vishay.com/doc?28348 The capacitors are delivered with screws and washers. Table 1 DIMENSIONS in millimeters AND MASS Lt ± 1 D ± 1 P ± 0.3 T ± 0.2 35.3 12.8 7.0 4.6 11.0 35.3 12.8 7.0 4.6 11.0 M S-0 Mb Ib ± 0.1 MASS (g) 7.9 M5 9.5 M8 12.0 75 7.9 M5 9.5 M8 12.0 95 DESIGN DRAWING L±1 H ± 0.3 B ± 0.3 d1 ± 0.1 35 x 60 2A 63.3 68.7 35 x 80 2A 81.3 86.7 35 x 105 2A 103.3 108.7 35.3 12.8 7.0 4.6 11.0 7.9 M5 9.5 M8 12.0 130 50 x 80 2A 82.8 88.8 51.0 22.2 7.1 4.8 11.0 7.9 M5 9.5 M12 16.0 200 50 x 105 2A 104.8 110.8 51.0 22.2 7.1 4.8 11.0 7.9 M5 9.5 M12 16.0 300 65 x 105 2A 104.8 110.7 65.0 28.5 7.0 4.6 11.9 7.9 M5 9.5 M12 16.0 480 65 x 105 HC 2B 104.8 109.2 65.0 28.5 5.5 3.5 18.0 13.0 M6 8.5 M12 16.0 480 76 x 105 2A 105.8 111.7 76.4 31.8 7.0 4.6 11.7 7.9 M5 9.5 M12 16.0 700 76 x 105 HC 2B 105.8 110.2 76.4 31.8 5.5 3.5 18.3 13.0 M6 8.5 M12 16.0 700 76 x 146 2A 145.8 151.7 76.4 31.8 7.0 4.6 11.7 7.9 M5 9.5 M12 16.0 1000 76 x 146 HC 2B 145.8 150.2 76.4 31.8 5.5 3.5 18.3 13.0 M6 8.5 M12 16.0 1000 76 x 220 2A 219.8 225.7 76.4 31.8 7.0 4.6 11.7 7.9 M5 9.5 M12 16.0 1500 76 x 220 HC 2B 219.8 224.2 76.4 31.8 5.5 3.5 18.3 13.0 M6 8.5 M12 16.0 1500 90 x 146 HC 2B 150.1 155.4 89.4 31.8 7.9 0.0 13.0 13.0 M6 10.0 M12 16.0 1300 90 x 220 HC 2B 218.1 223.4 89.4 31.8 7.9 0.0 13.0 13.0 M6 10.0 M12 16.0 2000 Note • For bolt version holds: L = L standard - 0.5 mm Lt = Lt standard - 0.5 mm Revision: 26-Apr-16 Document Number: 28384 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 106 PED-ST www.vishay.com Vishay BCcomponents PACKAGING QUANTITIES AND DIMENSIONS in millimeters DESIGN PACKAGING QUANTITIES (units per box) CARDBOX DIMENSIONS LxWxH 35 x 60 50 377 x 375 x 88 35 x 80 50 377 x 375 x 123 35 x 105 50 377 x 375 x 129 50 x 80 25 377 x 375 x 123 50 x 105 25 377 x 375 x 129 65 x 105 16 377 x 375 x 129 65 x 105 HC 16 377 x 375 x 129 76 x 105 12 377 x 375 x 129 76 x 105 HC 12 377 x 375 x 129 76 x 146 12 377 x 375 x 168 76 x 146 HC 12 377 x 375 x 168 76 x 220 18 520 x 270 x 280 76 x 220 HC 18 520 x 270 x 280 90 x 146 HC 8 377 x 375 x 168 90 x 220 HC 10 520 x 270 x 280 Note • For bolt version holds: H cardbox box: + 10 mm ORDERING EXAMPLE ELECTRICAL DATA SYMBOL DESCRIPTION CR Rated capacitance at 100 Hz, tolerance -10 % to +30 % IR Rated RMS ripple current at 100 Hz, 85 °C IL5 Max. leakage current after 5 min at UR ESR Z Max. equivalent series resistance at 100 Hz Max. impedance at 20 kHz Electrolytic capacitor 106 PED-ST series 10 000 μF/25 V; -10 %/+30 % Nominal case size: Ø 35 mm x 80 mm, ST version Ordering code: MAL2 10616103E3 Former 12NC: 2222 10616103 Note • Unless otherwise specified, all electrical values in Tables 2 and 3 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % Revision: 26-Apr-16 Document Number: 28384 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 106 PED-ST www.vishay.com Vishay BCcomponents Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) CR 100 Hz (μF) NOMINAL CASE SIZE ØDxL (mm) IR 100 Hz 85 °C (A) IL5 5 MIN. (mA) ESR MAX. 100 Hz (m) Z MAX. 20 kHz (m) 35 x 60 35 x 60 35 x 80 35 x 105 50 x 80 50 x 105 65 x 105 65 x 105 76 x 105 76 x 146 76 x 220 90 x 146 90 x 220 35 x 60 35 x 60 35 x 80 35 x 105 50 x 80 50 x 105 65 x 105 65 x 105 76 x 105 76 x 146 76 x 220 90 x 146 90 x 220 35 x 60 35 x 60 35 x 80 35 x 105 50 x 105 50 x 80 65 x 105 65 x 105 76 x 105 76 x 146 76 x 220 90 x 220 35 x 60 35 x 60 35 x 80 35 x 105 50 x 80 50 x 105 65 x 105 65 x 105 76 x 105 76 x 146 76 x 220 90 x 220 5.8 6.3 7.7 9.0 13.5 16.0 22.5 23.0 29.5 34.0 40.0 50.0 50.0 5.5 5.8 7.1 10.6 12.5 14.5 21.0 24.5 27.0 31.5 38.0 50.0 50.0 5.4 7.2 8.8 10.6 14.5 17.0 23.5 23.5 25.0 29.5 36.5 50.0 3.7 4.8 5.9 7.3 10.1 12.1 16.7 17.6 19.5 23.0 28.6 50.0 0.24 0.34 0.50 0.75 1.10 1.65 3.35 3.40 5.00 7.5 11.0 11.0 16.5 0.27 0.38 0.55 0.80 1.20 1.76 2.64 3.76 5.44 8.0 12.0 12.0 17.6 0.28 0.42 0.60 0.86 1.89 1.26 2.78 4.16 5.93 8.6 12.6 18.9 0.20 0.30 0.44 0.66 0.94 1.36 2.00 3.00 4.40 6.6 9.4 13.6 70 55 40 30 19 14 10 10 9 8 8 8 8 71 59 42 23 20 16 11 8 8 8 8 8 8 68 40 29 22 16 12 9 8 8 8 8 8 96 59 42 29 22 16 11 10 9 8 5 5 50 42 31 24 15 12 10 10 8 8 8 8 8 49 44 32 16 16 12 8 8 8 8 8 8 8 47 27 19 15 11 9 8 8 8 8 8 8 48 27 20 15 12 9 7 6 6 6 5 5 4700 6800 10 000 15 000 22 000 33 000 47 000 25 68 000 100 000 150 000 220 000 220 000 330 000 3300 4700 6800 10 000 15 000 22 000 33 000 40 47 000 68 000 100 000 150 000 150 000 220 000 2200 3300 4700 6800 15 000 10 000 63 22 000 33 000 47 000 68 000 100 000 150 000 1000 1500 2200 3300 4700 6800 100 10 000 15 000 22 000 33 000 47 000 68 000 Revision: 26-Apr-16 STANDARD HIGH POST M5 DISC ST ORDERING CODE MAL2106....... 16472E3 16682E3 16103E3 16153E3 16223E3 16333E3 16473E3 16683E3 16104E3 16154E3 16224E3 17332E3 17472E3 17682E3 17103E3 17153E3 17223E3 17333E3 17473E3 17683E3 17104E3 17154E3 18222E3 18332E3 18472E3 18682E3 18153E3 18103E3 18223E3 18333E3 18473E3 18683E3 18104E3 19102E3 19152E3 19222E3 19332E3 19472E3 19682E3 19103E3 19153E3 19223E3 19333E3 19473E3 - ST BOLT NUT ORDERING CODE MAL2106....... 56472E3 56682E3 56103E3 56153E3 56223E3 56333E3 56473E3 56683E3 56104E3 56154E3 56224E3 57332E3 57472E3 57682E3 57103E3 57153E3 57223E3 57333E3 57473E3 57683E3 57104E3 57154E3 58222E3 58332E3 58472E3 58682E3 58153E3 58103E3 58223E3 58333E3 58473E3 58683E3 58104E3 59102E3 59152E3 59222E3 59332E3 59472E3 59682E3 59103E3 59153E3 59223E3 59333E3 59473E3 - HIGH CURRENT M6 DISC ST BOLT NUT ST ORDERING ORDERING CODE CODE MAL2106....... MAL2106....... 36473E3 76473E3 36683E3 76683E3 36104E3 76104E3 36154E3 76154E3 36224E3 76224E3 46224E3 86224E3 46334E3 86334E3 37333E3 77333E3 37473E3 77473E3 37683E3 77683E3 37104E3 77104E3 37154E3 77154E3 47154E3 87154E3 47224E3 87224E3 38223E3 78223E3 38333E3 78333E3 38473E3 78473E3 38683E3 78683E3 38104E3 78104E3 48154E3 88154E3 39103E3 79103E3 39153E3 79153E3 39223E3 79223E3 39333E3 79333E3 39473E3 79473E3 49683E3 89683E3 Document Number: 28384 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 106 PED-ST www.vishay.com Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Surge voltage Us = 1.15 x UR Urev 1 V Reverse voltage Current Leakage current After 1 min at UR IL1 0.006 CR x UR + 4 μF After 5 min at UR IL5 0.002 CR x UR + 4 μF Case Ø D = 35 mm Typ. 13 nH Case Ø D = 50 mm Typ. 16 nH Case Ø D = 65 mm Typ. 19 nH (1) Case Ø D = 76 mm Typ. 20 nH (1) Case Ø D = 90 mm Typ. 21 nH (1) Inductance Equivalent series inductance (ESL) Note (1) Low ESL designs available on request RIPPLE CURRENT AND USEFUL LIFE CCC205-05 2.6 2.4 2.2 IA 2.0 IR 1.8 1.6 1.4 lifetime multiplier 1.2 (1) 0 1. 5 1. 0 2. 0 3. 0 4. 0 6. 10 20 0.8 30 1.0 40 IA = actual ripple current at 100 Hz IR = actual ripple current at 100 Hz and 85 °C With an absolute maximum of 50 A at 85 °C (1) Useful life at 85 °C and IR applied: 20 000 h 0.5 0.0 40 50 60 70 80 90 100 Tamb (°C) Fig. 3 - Multiplier of useful life as a function of ambient temperature and ripple current load Revision: 26-Apr-16 Document Number: 28384 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 106 PED-ST www.vishay.com Vishay BCcomponents Table 3 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) IR MULTIPLIER 50 0.83 100 1.00 200 1.10 400 1.15 1000 1.19 2000 1.20 Table 4 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance REFERENCE IEC 60384-4 / EN130300 subclause 4.13 PROCEDURE (quick reference) REQUIREMENTS Tamb = 85 °C; UR applied; 8000 h C/C: ± 15 % tan 1.3 x spec. limit Z 2 x spec. limit IL5 spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 85 °C; UR and IR applied; 20 000 h C/C: ± 45 % tan 3 x spec. limit Z 3 x spec. limit IL5 spec. limit no short or open circuit, no visible damage total failure percentage 1 % Shelf life (storage at high temperature) IEC 60384-4 / EN130300 subclause 4.17 Tamb = 85 °C; no voltage applied; 500 h after test: UR to be applied for 30 min, 24 h to 48 h before measurement C/C: ± 10 % tan 1.2 x spec. limit IL5 2 x spec. limit Revision: 26-Apr-16 Document Number: 28384 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000