link

Analog Power
AM2372N
N-Channel 100-V (D-S) MOSFET
Key Features:
• Low rDS(on) trench technology
• Low thermal impedance
• Fast switching speed
VDS (V)
100
Typical Applications:
• LED Inverter Circuits
• DC/DC Conversion Circuits
• Motor drives
PRODUCT SUMMARY
rDS(on) (mΩ)
2000 @ VGS = 10V
2200 @ VGS = 5.5V
SOT-23
ABSOLUTE MAXIMUM RATINGS (TA = 25°C UNLESS OTHERWISE NOTED)
Parameter
Symbol
Limit
VDS
Drain-Source Voltage
100
VGS
Gate-Source Voltage
±20
TA=25°C
0.66
ID
Continuous Drain Current a
TA=70°C
0.52
b
IDM
Pulsed Drain Current
3
a
I
0.66
Continuous Source Current (Diode Conduction)
S
T
=25°C
1.3
A
PD
Power Dissipation a
TA=70°C
0.8
TJ, Tstg -55 to 150
Operating Junction and Storage Temperature Range
Maximum Junction-to-Ambient a
ID (A)
0.66
0.63
THERMAL RESISTANCE RATINGS
Parameter
t <= 10 sec
Steady State
Symbol Maximum
100
RθJA
166
Units
V
A
A
W
°C
Units
°C/W
Notes
a.
Surface Mounted on 1” x 1” FR4 Board.
b.
Pulse width limited by maximum junction temperature
© Preliminary
1
Publication Order Number:
DS_AM2372N_1A
Analog Power
AM2372N
Electrical Characteristics
Parameter
Symbol
Gate-Source Threshold Voltage
Gate-Body Leakage
VGS(th)
IGSS
Zero Gate Voltage Drain Current
IDSS
On-State Drain Current a
ID(on)
Drain-Source On-Resistance a
rDS(on)
Forward Transconductance a
Diode Forward Voltage a
gfs
VSD
Test Conditions
Static
VDS = VGS, ID = 250 uA
VDS = 0 V, VGS = ±20 V
VDS = 80 V, VGS = 0 V
VDS = 80 V, VGS = 0 V, TJ = 55°C
VDS = 5 V, VGS = 10 V
VGS = 10 V, ID = 0.5 A
VGS = 5.5 V, ID = 0.4 A
VDS = 15 V, ID = 0.5 A
IS = 0.33 A, VGS = 0 V
Min
Typ
Max
1
±10
1
10
1
Unit
V
uA
uA
A
2000
2200
4
0.79
mΩ
S
V
Dynamic b
Total Gate Charge
Gate-Source Charge
Gate-Drain Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
Ciss
Coss
Crss
VDS = 50 V, VGS = 4.5 V,
ID = 0.5 A
VDS = 50 V, RL = 100 Ω,
ID = 0.5 A,
VGEN = 10 V, RGEN = 6 Ω
VDS = 15 V, VGS = 0 V, f = 1 Mhz
1.2
0.2
0.8
2
4
12
5
61
19
9
nC
ns
pF
Notes
a. Pulse test: PW <= 300us duty cycle <= 2%.
b. Guaranteed by design, not subject to production testing.
Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty,
representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out
of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special,
consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary
in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL
products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation
where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application,
Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs,
damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated
with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part.
APL is an Equal Opportunity/Affirmative Action Employer.
© Preliminary
2
Publication Order Number:
DS_AM2372N_1A
Analog Power
AM2372N
Typical Electrical Characteristics
4
0.5
0.4
3
ID - Drain Current (A)
RDS(on) - On-Resistance(Ω)
TJ = 25°C
3.5V
2
4V
1
4.5V,5V,5.5V,6V,8V,10V
0.3
0.2
0.1
0
0
0
0.2
0.4
0.6
0.8
0
1
ID-Drain Current (A)
3
4
5
2. Transfer Characteristics
4
1
TJ = 25°C
ID = 0.5A
TJ = 25°C
3
IS - Source Current (A)
RDS(on) - On-Resistance(Ω)
2
VGS - Gate-to-Source Voltage (V)
1. On-Resistance vs. Drain Current
2
1
0
0.1
0.01
0
2
4
6
8
10
0.2
0.4
0.6
0.8
1
1.2
VSD - Source-to-Drain Voltage (V)
VGS - Gate-to-Source Voltage (V)
3. On-Resistance vs. Gate-to-Source Voltage
4. Drain-to-Source Forward Voltage
1
120
F = 1MHz
10V,8V,6V,
5.5V,5V,4.5V
0.8
100
4V
Capacitance (pf)
ID - Drain Current (A)
1
0.6
3.5V
0.4
80
Ciss
60
40
Coss
0.2
20
0
Crss
0
0
0.5
1
1.5
2
2.5
3
0
10
15
20
VDS-Drain-to-Source Voltage (V)
VDS - Drain-to-Source Voltage (V)
5. Output Characteristics
© Preliminary
5
6. Capacitance
3
Publication Order Number:
DS_AM2372N_1A
Analog Power
AM2372N
Typical Electrical Characteristics
2.5
VDS = 50V
ID = 0.5A
RDS(on) - On-Resistance(Ω)
(Normalized)
VGS-Gate-to-Source Voltage (V)
10
8
6
4
2
0
2
1.5
1
0.5
0
1
2
3
-50
-25
Qg - Total Gate Charge (nC)
25
50
75
100
125
150
TJ -JunctionTemperature(°C)
7. Gate Charge
8. Normalized On-Resistance Vs
Junction Temperature
10
PEAK TRANSIENT POWER (W)
15
10 uS
100 uS
ID Current (A)
0
1 mS
1
10 mS
100 mS
1 SEC
10 SEC
0.1
100 SEC
DC
1
Idm limit
10
5
Limited by
RDS
0.01
0.1
1
10
100
0
0.001
1000
0.01
0.1
1
10
100
1000
VDS Drain to Source Voltage (V)
t1 TIME (SEC)
9. Safe Operating Area
10. Single Pulse Maximum Power Dissipation
1
D = 0.5
RθJA(t) = r(t) + RθJA
RθJA = 166 °C /W
0.2
0.1
0.1
P(pk)
0.05
0.02
Single Pulse
t1
t2
TJ - TA = P * RθJA(t)
Duty Cycle, D = t1 / t2
0.01
0.0001
0.001
0.01
0.1
1
10
100
1000
t1 TIME (sec)
11. Normalized Thermal Transient Junction to Ambient
© Preliminary
4
Publication Order Number:
DS_AM2372N_1A
Analog Power
AM2372N
Package Information
Symbol
A
A1
A2
b
c
D
E
E1
e
e1
L
θ1
MILLIMETERS
MIN
MAX
0.8
1.2
0
0.1
0.7
1.1
0.3
0.5
0.1
0.2
2.7
3.1
2.6
3
1.4
1.8
0.95 BSC
1.9 BSC
0.3
0.6
7° NOM
Recommended Pad Layout
Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty,
representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out
of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special,
consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary
in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL
products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation
where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application,
Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs,
damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated
with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part.
APL is an Equal Opportunity/Affirmative Action Employer.
© Preliminary
5
Publication Order Number:
DS_AM2372N_1A