Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : HA Type : V Hight-temperature assuranceize HA ↑ S Features ● Endurance : 105 °C 1000 ● Vibration-proof product is ● RoHS compliant h available upon request. (08 mm and larger) Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –40 °C to +105 °C 6.3 V.DC to 100 V.DC 1 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 63 100 (Impedance ratio at 120 Hz) Z(–25 °C)/Z(+20 °C) 4 3 2 2 2 2 3 3 Z(–40 °C)/Z(+20 °C) 8 6 4 4 3 3 4 4 After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±20 % of the initial value (6.3 V.DC of miniature : ±30 %) < 200 % of the initial limit tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 50, 60 120 1k 10 k to Correction factor 0.70 1.00 1.30 1.70 Capacitance (µF) 22 j HA Mark for Lead-Free products (Black dot) 25 35 50 C E V H W (I) ( ) Reference size (Unit : mm) Rated voltage code 16 + Pressure Relief (010 and larger) Series identification Lot number R. Voltage 6.3 10 (V.DC) Code j A L A±0.2 (P) Negative polarity marking (–) – H 0D±0.5 0.3 max. (I) Example : 6.3 V.DC 22 µF Marking color : BLACK K Dimensions B±0.2 Marking 63 100 J 2A Size L A, B H code 0D 4.3 5.5 max. B 4.0 5.4 +- 0.1 0.2 C 5.0 5.4 +- 0.1 5.3 6.5 max. 0.2 D 6.3 5.4 +- 0.1 6.6 7.8 max. 0.2 D8 6.3 7.7±0.3 6.6 7.8 max. E 8.0 6.2±0.3 8.3 9.5 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P K 1.0 0.35 +- 0.15 0.20 1.5 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 1.8 0.35 +- 0.15 0.20 2.2 0.35 +- 0.15 0.20 3.1 0.70±0.20 4.6 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 1000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 22 33 47 100 6.3 220 330 470 1000 1500 22 33 47 10 100 220 470 1000 10 22 33 47 100 16 220 330 470 680 ✽ 0D L Size code 4 4 4 5 5 6.3 6.3 6.3 8 8 8 10 10 4 4 5 5 6.3 8 6.3 8 8 10 10 4 4 5 5 5 6.3 6.3 6.3 8 10 8 10 8 10 10 5.4 5.4 5.4 5.4 5.4 5.4 5.4 7.7 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 6.2 7.7 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 5.4 7.7 10.2 10.2 10.2 10.2 10.2 10.2 10.2 B (B) (B) C (C) D (D) D8 F (F) (F) G G (B) (B) C (C) (D) E D8 F (F) G G B (B) C (C) (C) D (D) D8 (F) G (F) G (F) G G Specification Ripple tan d current (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 29 0.30 29 0.35 36 0.35 46 0.30 47 0.35 71 0.30 74 0.35 105 0.30 230 0.35 300 0.35 300 0.35 400 0.35 480 0.35 28 0.30 29 0.30 43 0.22 43 0.30 71 0.30 110 0.26 105 0.22 160 0.26 200 0.26 270 0.26 400 0.26 28 0.16 28 0.26 39 0.16 35 0.26 39 0.26 70 0.16 70 0.26 105 0.16 150 0.20 210 0.20 170 0.20 230 0.20 340 0.20 340 0.20 380 0.20 Min. Packaging Q'ty Part No. EEEHA0J220R EEEHA0J330WR EEEHA0J470WR EEEHA0J470R EEEHA0J101WR EEEHA0J101P EEEHA0J221WP EEEHA0J331XP EEEHA0J331P EEEHA0J471UP EEEHA0J102UP EEEHA0J102P EEEHA0J152P EEEHA1A220WR EEEHA1A330WR EEEHA1A330R EEEHA1A470WR EEEHA1A101WP EEEHA1A101P EEEHA1A221XP EEEHA1A221P EEEHA1A471UP EEEHA1A471P EEEHA1A102P EEEHA1C100R EEEHA1C220WR EEEHA1C220R EEEHA1C330WR EEEHA1C470WR EEEHA1C470P EEEHA1C101WP EEEHA1C221XP EEEHA1C221UP EEEHA1C221P EEEHA1C331UP EEEHA1C331P EEEHA1C471UP EEEHA1C471P EEEHA1C681P Reflow Taping (pcs) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (2) (1) (2) (2) (2) (2) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (2) (2) 2000 2000 2000 1000 1000 1000 1000 900 500 500 500 500 500 2000 2000 1000 1000 1000 1000 900 500 500 500 500 2000 2000 1000 1000 1000 1000 1000 900 500 500 500 500 500 500 500 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 1000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 4.7 10 22 33 25 47 100 220 330 470 4.7 10 22 33 35 47 100 220 330 1 2.2 3.3 4.7 10 22 50 33 47 100 220 ✽ 0D L Size code 4 4 5 5 6.3 5 6.3 6.3 8 6.3 8 8 8 10 8 10 10 4 4 5 5 6.3 6.3 8 8 8 6.3 8 10 8 10 10 4 4 4 5 6.3 8 6.3 8 8 6.3 8 10 8 10 10 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 7.7 6.2 10.2 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 6.2 6.2 10.2 7.7 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 6.2 7.7 6.2 10.2 7.7 10.2 10.2 10.2 10.2 10.2 B (B) C (C) D (C) D (D) E D8 (E) F (F) G (F) G G B (B) C (C) D (D) E (E) F D8 (F) G (F) G G B B B C D E D8 (E) F D8 (F) G (F) G G Specification Ripple tan d current (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 22 0.14 22 0.20 28 0.14 35 0.20 55 0.14 45 0.20 65 0.14 70 0.20 91 0.16 91 0.14 91 0.16 130 0.16 160 0.16 190 0.16 180 0.16 340 0.16 360 0.16 22 0.12 22 0.16 30 0.12 35 0.16 60 0.12 42 0.16 84 0.14 84 0.14 98 0.14 84 0.12 120 0.14 160 0.14 170 0.14 210 0.14 250 0.14 10 0.12 16 0.12 16 0.12 23 0.12 35 0.12 70 0.12 70 0.12 70 0.12 91 0.12 63 0.12 95 0.12 100 0.12 110 0.12 120 0.12 150 0.12 Min. Packaging Q'ty Part No. EEEHA1E4R7R EEEHA1E100WR EEEHA1E100R EEEHA1E220WR EEEHA1E220P EEEHA1E330WR EEEHA1E330P EEEHA1E470WP EEEHA1E470P EEEHA1E101XP EEEHA1E101UP EEEHA1E101P EEEHA1E221UP EEEHA1E221P EEEHA1E331UP EEEHA1E331P EEEHA1E471P EEEHA1V4R7R EEEHA1V100WR EEEHA1V100R EEEHA1V220WR EEEHA1V220P EEEHA1V330WP EEEHA1V330P EEEHA1V470UP EEEHA1V470P EEEHA1V101XP EEEHA1V101UP EEEHA1V101P EEEHA1V221UP EEEHA1V221P EEEHA1V331P EEEHA1H1R0R EEEHA1H2R2R EEEHA1H3R3R EEEHA1H4R7R EEEHA1H100P EEEHA1H220P EEEHA1H330XP EEEHA1H330UP EEEHA1H330P EEEHA1H470XP EEEHA1H470UP EEEHA1H470P EEEHA1H101UP EEEHA1H101P EEEHA1H221P Reflow Taping (pcs) (1) (1) (1) (1) (1) (1) (1) (1) (2) (1) (2) (2) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (1) (2) (2) (2) (1) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (2) (1) (2) (2) (1) (2) (2) (2) (2) (2) 2000 2000 1000 1000 1000 1000 1000 1000 1000 900 1000 500 500 500 500 500 500 2000 2000 1000 1000 1000 1000 1000 1000 500 900 500 500 500 500 500 2000 2000 2000 1000 1000 1000 900 1000 500 900 500 500 500 500 500 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 1000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 10 22 63 33 47 4.7 10 100 22 33 47 ✽ 0D L Size code 8 8 8 10 8 10 8 8 8 10 10 10 6.2 6.2 10.2 10.2 10.2 10.2 6.2 10.2 10.2 10.2 10.2 10.2 E (E) F G (F) G (E) F (F) G G (G) Specification Ripple tan d current (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 25 0.18 25 0.18 30 0.18 45 0.18 45 0.18 50 0.18 30 0.18 55 0.18 55 0.18 60 0.18 65 0.18 65 0.18 Min. Packaging Q'ty Part No. EEEHA1J100P EEEHA1J220UP EEEHA1J220P EEEHA1J330P EEEHA1J470UP EEEHA1J470P EEEHA2A4R7UP EEEHA2A100P EEEHA2A220UP EEEHA2A220P EEEHA2A330P EEEHA2A470UP Reflow Taping (pcs) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) 1000 1000 500 500 500 500 1000 500 500 500 500 500 ✽ Size code( ) : Miniaturization product · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016