Electric Double Layer Capacitors (Gold Capacitor) Stacked Coin Type Series : SD Low temperature assured product Features ● Endurance : +70 °C 1000 h temperature range : –40 °C to +70 °C ● RoHS compliant ● Category Recommended applications ● Memory back-up for video and audio equipment, cameras, telephones, printers, data terminals, rice cookers, intelligent remote controls Specifications Category temp. range Maximum operating voltage Nominal cap.range Characteristics at low temperature Endurance Shelf life –40 °C to +70 °C 5.5 V.DC 0.22 F, 0.33 F Capacitance change ±30 % of initial measured value at +20 °C (at –40 °C) Internal resistance < 7 times of initial measured value at +20 °C (at –40 °C) After 1000 hours application of 5.5 V.DC at +70 °C, the capacitor shall meet the following limits. Capacitance change ±30 % of initial measured value Internal resistance < 4 times of initial specified value After 1000 hours storage at +70 °C without load, the capacitor shall meet the specified limits for Endurance. Dimensions in mm(not to scale) Terminal: V Terminal: H f10.5 max. Sleeve B max. 11.5 max. 10.5 max. 0.8±0.05 (1.7) 3.0±0.5 0.2±0.05 5.0±0.8 0.2±0.05 + 10.0±0.5 – (Unit : mm) Cap. (F) 0.22 0.33 B 5.0 5.5 Cap. (F) 0.22 0.33 3.0±0.5 A max. 11.5 max. 0.8±0.05 (1.7) (Unit : mm) A 6.0 6.5 Characteristics list Maximum operating Capacitance (F) voltage (V.DC) 0.22 5.5 0.33 0.176 to 0.396 < 75 300 or less Min. Mass packaging Parts number (Reference value) q'ty (g) (pcs) EECS0HD224( )N 1.0 200 0.264 to 0.594 < 75 300 or less EECS0HD334( )N Capacitance tolerance (F) Internal resistance Recommended (Initial specified value) discharge current (Ω) at 1 kHz (µA) 1.1 200 ( ) Please use V or H, to indicate the terminal style. Note : Do not use reflow soldering. (IR, Atmosphere heating methods, etc.) Please refer to the page of “Application guidelines”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Jan. 2016