LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only ROUND TYPE LED LAMPS Pb Lead-Free Parts LSBI2643/T5/A DATA SHEET DOC. NO : QW0905- LSBI2643/T5/A REV. : A DATE : 20 - Jan. - 2016 發行 立碁電子 DCC LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSBI2643/T5/A Page 1/7 Package Dimensions 2.9 3.3 3.1 4.3 1.5MAX 25.0MIN □0.5 TYP 1.0MIN 2.54TYP + - Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. Directivity Radiation 0° -30° 30° -60° 100% 75% 50% 60° 25% 0 25% 50% 75% 100% LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSBI2643/T5/A Page 2/7 Absolute Maximum Ratings at Ta=25 ℃ Ratings Symbol Parameter UNIT SBI Forward Current IF 30 mA Peak Forward Current Duty 1/10@10KHz IFP 70 mA Power Dissipation PD 120 mW Ir 50 μA Electrostatic Discharge( * ) ESD 500 V Operating Temperature Topr -20 ~ +80 ℃ Storage Temperature Tstg -30 ~ +100 ℃ Reverse Current @5V Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic * glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. Typical Electrical & Optical Characteristics (Ta=25 ℃) COLOR PART NO LSBI2643/T5/A MATERIAL InGaN/SiC Emitted Lens Blue Water Clear Forward Peak Dominant Spectral voltage wave wave halfwidth length length △λ nm @20mA(V) λPnm λDnm Luminous intensity @5mA(mcd) Viewing angle 2θ 1/2 (deg) Typ. Max. Min. Typ. 430 465 65 3.8 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. 4.7 15 28 36 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/7 PART NO. LSBI2643/T5/A Bin Code SBI CHIP Group Luminous Intensity(mcd) at 5 mA Min. Max. A6 15 21 A7 21 28 A8 28 38 A9 38 50 A10 50 65 A11 65 90 Color Code SBI CHIP Group Wave length(nm) at 5 mA Min. Max. 0F 459 462 0E 462 465 0D 465 468 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSBI2643/T5/A Page 4/7 Typical Electro-Optical Characteristics Curve SBI CHIP Fig.2 Relative Intensity vs. Wavelength 30 1.0 Relative Intensity(%) Forward Current(mA DC) Fig.1 Forward current vs. Forward Voltage 25 20 15 10 5 0 1 2 3 4 0.5 0 380 5 Forward Voltage(V) 100 Relative Intensity Relative Intensity(%) 580 630 680 10 75 50 25 0 5 10 15 20 25 30 35 40 45 Fig.5 Forward Current vs. Ambient Temperature 40 30 20 10 0 25 50 75 Ambient Temperature ( ℃) 1 0 0 25 50 75 Lead Temperature ( ℃) Forward Current (mA DC) Forward Current (mA DC) 530 Fig.4 Relative Intensity vs. Lead Temperature 125 0 480 Wavelength (nm) Fig.3 Relative Intensity vs. Forward Current 0 430 100 100 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LSBI2643/T5/A Page 5/7 Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350°C Max Soldering Time:3 Seconds Max(One Time) Distance:2mm Min(From solder joint to body) 2.Wave Soldering Profile Dip Soldering Preheat: 120°C Max Preheat time: 60seconds Max Ramp-up 2° C/sec(max) Ramp-Down:-5° C/sec(max) Solder Bath:260°C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to body) Temp(° C) 260° C3sec Max 260° 5° /sec max 120° 25° 0° 0 2° /sec max Preheat 60 Seconds Max 50 100 150 Time(sec) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 6/7 PART NO. LSBI2643/T5/A Reliability Test: Test Item Test Condition Description Reference Standard Operating Life Test 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=105 ℃±5 ℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of high temperature for hours. MIL-STD-883:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. High Temperature High Humidity Test 1.Ta=65 ℃±5℃ 2.RH=90 %~95% 3.t=240hrs ±2hrs The purpose of this test is the resistance of the device under tropical for hours. 1.Ta=105 ℃±5℃&-40 ℃±5℃ (10min) (10min) 2.total 10 cycles The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 Solder Resistance Test 1.T.Sol=260 ℃±5 ℃ 2.Dwell time= 10 ±1sec. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 Solderability Test 1.T.Sol=230 ℃±5 ℃ 2.Dwell time=5 ±1sec This test intended to see soldering well performed or not. MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 Thermal Shock Test JIS C 7021: B-12 MIL-STD-202:103B JIS C 7021: B-11 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 7/7 PACKING SPECIFICATION 1. 1000PCS / BAG 2. 8 BAG / INNER BOX SIZE : L X W X H 33cm X 19cm X 8cm L W H 3. 12 INNER BOXES / CARTON SIZE : L X W X H 58cm X 34cm X 34cm L W C/NO: MADE IN CHINA . NO M IT E Y : Q'T ,: W : N, , W G, S PC s g k s kg H