Plastic Film Capacitors Stacked Metallized PPS Film Chip Capacitor Type : ECHU(X) Stacked metallized PPS film as dielectric with simple mold-less construction Features ● Small in size (Minimum size 1.6 mm × 0.8 ● 85 °C, 85 %RH, W.V. × 1.0 for 500 hours ● For reflow soldering ● RoHS directive compliant mm) Recommended applications ● Time-constant ● Filtering ● Oscillation and ● Audio circuit resonance Explanation of part number 1 2 3 4 E C H U Product code 5 6 7 8 9 10 11 12 X Dielectric & construction Rated voltage Capacitance 1C 16 V.DC G ±2 % 1H 50 V.DC J ±5 % Cap. Tol. Suffix Suffix Code Tape width Reel diameter ✽ Tape width 8 mm and diameter 8 mm f180 mm 5 f330 mm reel is 9 12 mm f330 mm prepared Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Dissipation factor (tan d) Withstand voltage Insulation resistance (IR) Soldering conditions – 55 °C to +125 °C 16 V.DC, 50 V.DC (50 V.DC : 0.12 μF or more : Derating or rated voltage by 1.25 % / °C at more than 105 °C) 0.00010 μF to 0.22 μF (E12) ±2 %(G), ±5 %(J) tan d < 0.6 % (20 °C, 1 kHz) Between terminals : Rated volt. (V.DC)×150 %, 60 s 16 V.DC : IR > 3000 MΩ (20 °C, 10 V.DC, 60 s) 50 V.DC : IR > 3000 MΩ (20 °C, 50 V.DC, 60 s) Reflow soldering : 260 °C max. and 95 sec max. at more than 220 °C (Temp. at capacitor surface) ✽ Please consult us for flow soldering ✽ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”. Construction Dimensions H±0.2 (±0.15) ✽ ✽ L±0.2 (±0.3) ✽ ✽ ✽ (±0.15) ✽ ✽ W±0.2 Element (Stacked) Outer electrode e±0.30 e±0.30 g (±0.25) ✽ (±0.25) ✽ (±0.20) ✽ ✽ (±0.20) ✽ ✽ ✽ ✽ To be applied only for size code J1, J2 ✽✽ To be applied only for size code K1 ✽✽✽ To be applied only for size code E1, E2, D1, D3, D4 Size code K1 J1 J2 H1 H2 H3 G1 G2 G3 E1 E2 D1 D3 D4 Unit : mm L W H e g 1.6 0.8 0.7 0.35 > 0.4 2.0 1.25 0.9 0.45 > 0.6 2.0 1.25 1.1 0.45 > 0.6 3.2 1.6 0.9 0.65 > 1.0 3.2 1.6 1.1 0.65 > 1.0 3.2 1.6 1.5 0.65 > 1.0 3.2 2.5 1.1 0.65 > 1.0 3.2 2.5 1.5 0.65 > 1.0 3.2 2.5 2.1 0.65 > 1.0 4.8 3.3 1.5 0.80 > 2.0 4.8 3.3 2.1 0.80 > 2.0 6.0 4.1 1.9 0.80 > 2.0 6.0 4.1 2.5 0.80 > 2.0 6.0 4.1 2.8 0.80 > 2.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2016 Plastic Film Capacitors Taping specification for automatic mounting Refer to the page of taping specifications Rating · Dimensions · Quantity ● Capacitance Capacitance (μF) 0.00010 0.00012 0.00015 0.00018 0.00022 0.00027 0.00033 0.00039 0.00047 0.00056 0.00068 0.00082 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 tolerance : ±2 %(G), ±5 %(J) Rated voltage 16 V.DC Dimensions (mm) Size Part No. Q'ty L W H code ECHU1C101◻X5 1.6 0.8 0.7 K1 ECHU1C121◻X5 1.6 0.8 0.7 K1 ECHU1C151◻X5 1.6 0.8 0.7 K1 ECHU1C181◻X5 1.6 0.8 0.7 K1 ECHU1C221◻X5 1.6 0.8 0.7 K1 ECHU1C271◻X5 1.6 0.8 0.7 K1 ECHU1C331◻X5 1.6 0.8 0.7 K1 ECHU1C391◻X5 1.6 0.8 0.7 K1 ECHU1C471◻X5 1.6 0.8 0.7 K1 4000 ECHU1C561◻X5 1.6 0.8 0.7 K1 ECHU1C681◻X5 1.6 0.8 0.7 K1 ECHU1C821◻X5 1.6 0.8 0.7 K1 ECHU1C102◻X5 1.6 0.8 0.7 K1 ECHU1C122◻X5 1.6 0.8 0.7 K1 ECHU1C152◻X5 1.6 0.8 0.7 K1 ECHU1C182◻X5 1.6 0.8 0.7 K1 ECHU1C222◻X5 1.6 0.8 0.7 K1 ECHU1C272◻X5 1.6 0.8 0.7 K1 ECHU1C332◻X5 2.0 1.25 0.9 J1 ECHU1C392◻X5 2.0 1.25 0.9 J1 ECHU1C472◻X5 2.0 1.25 0.9 J1 ECHU1C562◻X5 2.0 1.25 0.9 J1 ECHU1C682◻X5 2.0 1.25 0.9 J1 ECHU1C822◻X5 2.0 1.25 1.1 J2 ECHU1C103◻X5 2.0 1.25 1.1 J2 3000 ECHU1C123◻X5 3.2 1.6 0.9 H1 ECHU1C153◻X5 3.2 1.6 0.9 H1 ECHU1C183◻X5 3.2 1.6 0.9 H1 ECHU1C223◻X5 3.2 1.6 0.9 H1 ECHU1C273◻X5 3.2 1.6 1.1 H2 ECHU1C333◻X5 3.2 1.6 1.1 H2 ECHU1C393◻X5 3.2 1.6 1.5 H3 ECHU1C473◻X5 3.2 1.6 1.5 H3 ECHU1C563◻X5 3.2 2.5 1.5 G2 2000 ECHU1C683◻X5 3.2 2.5 1.5 G2 ECHU1C823◻X5 3.2 2.5 2.1 G3 ECHU1C104◻X5 3.2 2.5 2.1 G3 Rated voltage 50 V.DC Dimensions (mm) Size Part No. Q'ty L W H code ECHU1H101◻X5 2.0 1.25 0.9 J1 ECHU1H121◻X5 2.0 1.25 0.9 J1 ECHU1H151◻X5 2.0 1.25 0.9 J1 ECHU1H181◻X5 2.0 1.25 0.9 J1 ECHU1H221◻X5 2.0 1.25 0.9 J1 ECHU1H271◻X5 2.0 1.25 0.9 J1 ECHU1H331◻X5 2.0 1.25 0.9 J1 ECHU1H391◻X5 2.0 1.25 0.9 J1 ECHU1H471◻X5 2.0 1.25 0.9 J1 ECHU1H561◻X5 2.0 1.25 0.9 J1 ECHU1H681◻X5 2.0 1.25 0.9 J1 ECHU1H821◻X5 2.0 1.25 0.9 J1 ECHU1H102◻X5 2.0 1.25 0.9 J1 3000 ECHU1H122◻X5 2.0 1.25 0.9 J1 ECHU1H152◻X5 2.0 1.25 0.9 J1 ECHU1H182◻X5 2.0 1.25 0.9 J1 ECHU1H222◻X5 2.0 1.25 0.9 J1 ECHU1H272◻X5 2.0 1.25 0.9 J1 ECHU1H332◻X5 3.2 1.6 0.9 H1 ECHU1H392◻X5 3.2 1.6 0.9 H1 3.2 1.6 0.9 H1 ECHU1H472◻X5 ECHU1H562◻X5 3.2 1.6 0.9 H1 ECHU1H682◻X5 3.2 1.6 0.9 H1 ECHU1H822◻X5 3.2 1.6 1.1 H2 ECHU1H103◻X5 3.2 1.6 1.1 H2 ECHU1H123◻X5 3.2 2.5 1.1 G1 ECHU1H153◻X5 3.2 2.5 1.1 G1 ECHU1H183◻X5 3.2 2.5 1.5 G2 ECHU1H223◻X5 3.2 2.5 1.5 G2 2000 ECHU1H273◻X5 3.2 2.5 1.5 G2 ECHU1H333◻X5 3.2 2.5 2.1 G3 3.2 2.5 2.1 G3 ECHU1H393◻X5 ECHU1H473◻X9 4.8 3.3 1.5 E1 ECHU1H563◻X9 4.8 3.3 1.5 E1 ECHU1H683◻X9 4.8 3.3 1.5 E1 ECHU1H823◻X9 4.8 3.3 2.1 E2 3000 ECHU1H104◻X9 4.8 3.3 2.1 E2 ECHU1H124◻X9 6.0 4.1 1.9 D1 ECHU1H154◻X9 6.0 4.1 1.9 D1 ECHU1H184◻X9 6.0 4.1 2.5 D3 2000 ECHU1H224◻X9 6.0 4.1 2.8 D4 ✽ ◻ : Capacitance tolerance code Recommended for land dimensions Unit : mm Electrode Size code C Land A B K1 J1, J2 H1, H2, H3 G1, G2, G3 E1, E2 D1, D3, D4 Land dimensions Reflow soldering A B C 0.6 2.0 0.7 0.8 2.4 1.1 1.8 3.6 1.4 1.8 3.6 2.3 3.0 5.6 3.0 4.0 7.0 3.8 ✽ lt is not warrantable that you can mount the capacitor without trouble under all the mounting condition when “Recommender for Land dimensions” is adopted. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Feb. 2016