ABD0000C174

Plastic Film Capacitors
Stacked Metallized PPS Film
Chip Capacitor
Type : ECHU(C)
Stacked metallized PPS film as dielectric with simple
mold-less construction
Features
● Small
in size
loss and excellent frequency characteristics
● For reflow soldering
● RoHS directive compliant
● Low
Recommended applications
● Time-constant
● Filtering
● Oscillation
and resonance
circuit for LCD backlight inverter unit
● Resonance
Explanation of part number
1
2
3
4
5
E
C
H
U
1
Product code
Dielectric &
construction
6
8
9
10
11
C
Rated voltage
1
7
Capacitance
100 V.DC
Cap. Tol.
G
±2 %
J
±5 %
Suffix
Suffix
Code Tape width
9
12 mm
V
16 mm
Specifications
Category temp. range
(Including temperature-rise on unit surface)
Rated voltage
Capacitance range
– 55 °C to +105 °C
100 V.DC
0.010 µF to 0.22 µF (E12)
Capacitance tolerance
±2 %(G), ±5 %(J)
Dissipation factor (tan d)
tan d < 0.6 % (20 °C, 1 kHz)
Withstand voltage
Between terminals : Rated volt. (V.DC)×150 %, 60 s
Insulation resistance (IR)
IR > 3000 MΩ (20 °C, 100 V.DC, 60 s)
Reflow soldering : 260 °C max. and 95 sec max. at more than 220 °C
(Temp. at capacitor surface)
Soldering conditions
✽ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Feb. 2016
Plastic Film Capacitors
Construction
Dimensions
Unit : mm
(±0.4) ✽
W±0.3
H±0.2
(±0.3) ✽
(±0.4) ✽
L±0.2
Size
code
E1
E2
E3a
E3
D1
D2
D3
D4
D5
Z
Y
Outer
electrode
Element
(Stacked)
0.35±0.20
0.35±0.20
✽ To be applied only for size code Z, Y
L
W
H
4.8
4.8
4.8
4.8
6.0
6.0
6.0
6.0
6.0
7.1
7.1
3.3
3.3
3.3
3.3
4.1
4.1
4.1
4.1
4.1
5.0
6.3
1.4
2.0
2.4
2.8
1.8
2.0
2.4
2.8
3.2
✽
✽
✽ Refer to the column
“ Rating, Dimensions&Quantity”
Taping specification for automatic mounting
Refer to the page of taping specifications
Rating · Dimensions · Quantity
● Capacitance
tolerance : ±2 %(G), ±5 %(J)
Capacitance
(µF)
Part No.
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
0.12
0.15
0.18
0.22
ECHU1103◻C9
ECHU1123◻C9
ECHU1153◻C9
ECHU1183◻C9
ECHU1223◻C9
ECHU1273◻C9
ECHU1333◻C9
ECHU1393◻C9
ECHU1473◻C9
ECHU1563◻C9
ECHU1683◻C9
ECHU1823◻C9
ECHU1104◻C9
ECHU1124◻C9
ECHU1154◻CV
ECHU1184◻CV
ECHU1224◻CV
Rated voltage 100 V.DC
Dimensions (mm)
L
W
H
4.8
3.3
1.4
4.8
3.3
1.4
4.8
3.3
2.0
4.8
3.3
2.0
4.8
3.3
2.4
4.8
3.3
2.8
6.0
4.1
1.8
6.0
4.1
2.0
6.0
4.1
2.4
6.0
4.1
2.8
6.0
4.1
3.2
7.1
5.0
2.8
7.1
5.0
3.0
7.1
5.0
3.4
7.1
6.3
3.4
7.1
6.3
4.0
7.1
6.3
4.8
Size
code
E1
E1
E2
E2
E3a
E3
D1
D2
D3
D4
D5
Z
Z
Z
Y
Y
Y
Q'ty
3000
2000
3000
2000
1500
1000
✽ ◻ : Capacitance tolerance code
Recommended for land dimensions
Unit : mm
Electrode
Size code
C
Land
A
B
E1, E2, E3a, E3
D1, D2, D3, D4, D5
Z
Y
Land dimensions
Reflow soldering
A
B
C
2.6
6.6
3.0
3.8
7.8
3.8
4.5
9.0
4.6
4.5
9.0
5.7
✽ lt is not warrantable that you can mount the capacitor without trouble under all the mounting condition when “Recommender for Land dimensions” is adopted.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Feb. 2016