W005MF thru W10MF

MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
W005MF THRU W10MF
VOLTAGE RANGE
CURRENT
FEATURES
l Low cost
l This series is UL recognized under component
index,file number E127707
l High forward surge current capability
l Ideal for printed circuit board
l High temperature soldering guaranteed:
260 oC/10 second, at 5 lbs. (2.3kg) tension.
50 to 1000 Volts
1.5 Amperes
.366(9.3)
.350(8.9)
.220(5.6)
.200(5.1)
1.0
(25.4)
MIN
1.1
(27.9)
MIN
MECHANICAL DATA
l Case: Molded plastic body
l Terminal: Lead solderable per MIL-STD-202E
method 208C.
l Polarity: Polarity symbols molded on case
l Mounting position: Any
l Weight:0.042ounce,1.2grams
.032(0.8)DIA
.028(0.7)TYP
POS
LEAD
~
+
.220(5.6)
.180(4.6)
~
.220(5.6)
.180(4.6)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%.
SYMBOLS W005MF W01MF W02MF W04MF W06MF
W08MF W10MF
UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
Volts
Maximum Average Forward
Rectified Output Current, at TA=25℃(Note1)
I(AV)
1.5
Amps
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
50
Amps
Ratings for Fusing (t<8.3ms)
I2T
10
A2 S
Maximum Instantaneous Forward Voltage at 1.0A
VF
1.3
Volts
Maximum DC Reverse Current at rated
DC blocking voltage per element
TA=25℃
IR
5.0
µAmps
10
TA=100℃
0.5
mAmps
25
PF
Typical Junction Capacitance(Note2)
CJ
Maximum reverse recovery time (Note 3) TJ =25℃
TRR
Operating Temperature Range
TJ
-55 to +150
℃
TSTG
-55 to +150
℃
Storage Temperature Range
150
250
500
nS
NOTES:
1.
Unit mounted on P.C. board with 0.22”×0.22”(5.5×5.5mm)copper pads,0.375”(9.5mm)lead length.
2.
Measured at 1.0MHz and applied reverse voltage of 4.0 volts.
3.
Reverse recovery test conditions: IF=0.5A, IR=1.0A, IRR=0.25A
Web Site: www.hkmic.com
1/2
MASTER INSTRUMENT CORPORATION
SINGLE-PHASE BRIDGE RECTIFIER
W005MF THRU W10MF
VOLTAGE RANGE
CURRENT
Web Site: www.hkmic.com
50 to 1000 Volts
1.5 Amperes
2/2