AGM0000CE36

Choke Coils
Power Choke Coil
Series:
PCC-F126F (N6)
Thin, compact and high power
■ Features
●
●
●
●
High power (Isat 20 A /100 °C)
Thin profile (5.7 mm height)/SMD
Low leakage flux
RoHS compliant
■ Recommended Applications
● DC-DC converter for driving PCs at high speed
● On-board power supply module for DC-DC converters
(10 to 40 W)
■ Standard Packing Quantity
● 500 pcs./Reel
■ Explanation of Part Numbers
1
2
3
4
&
5
2
1
Product code
5
6
7
8
9
10
11
12
Core
Packaging
Suffix
'
Classification Size
Winding
Inductance
■ Standard Parts
Parts No.
Type
Initial
inductance
at 25 °C
L0 (μH)
ETQP6F1R2HFA
ETQP6F2R0HFA
ETQP6F3R2HFA
ETQP6F4R6HFA
ETQP6F6R4HFA
ETQP6F8R2HFA
ETQP6F102HFA
ETQP6F1R0SFA
ETQP6F1R6SFA
ETQP6F2R5SFA
ETQP6F3R5SFA
ETQP6F0R8LFA
ETQP6F1R3LFA
ETQP6F2R0LFA
ETQP6F2R9LFA
ETQP6F4R1LFA
HL
SP
LB
2.3
3.5
4.8
6.6
8.3
10.4
12.5
1.9
2.8
3.6
4.9
1.8
2.5
3.1
4.1
5.0
Tol.
(%)
±30
±25
±30
±20
Inductance
at flat point
at 25 °C
L1 (μH)
1.2
2.0
3.2
4.6
6.4
8.2
10.2
1.0
1.6
2.5
3.5
0.8
1.3
2.0
2.9
4.1
Tol.
(%)
±30
±25
±30
±20
Saturation
current
at 25 °C
at 100 °C
I sat
I sat
(A)
(A)
min.
min.
14.3
11.7
10.7
8.7
8.6
7.1
7.3
6.0
6.2
5.2
6.0
5.0
4.7
4.0
19.4
15.4
14.9
12.2
11.3
9.3
9.5
8.0
25.2
20.0
18.6
15.8
15.1
12.1
12.0
10.0
10.8
8.7
Heat
DC resistance
current
at 20 °C
ΔT=40 °C
I 0 (A)
14.2
12.5
10.8
9.3
7.9
7.2
6.5
14.2
12.5
10.8
9.3
14.2
12.5
10.8
9.3
7.9
RDC
(mΩ)
max.
2.24
3.30
4.92
6.48
8.64
10.90
13.30
2.24
3.30
4.92
6.48
2.24
3.30
4.92
6.48
8.64
(Note1) Inductance is measured at 100 kHz
(Note2) For definitions of L0 & L1 please see the next page
(Note3) Saturation current (I sat) is the current value that inductance (L1) decreases
to 80 % of initial value.
(Note4) Heat current (I0) is the actual value of the current at which
the temperature rise of the coil becomes 40 dc from its initial (ambient temperature) value.
The case temperature of the power choke coil is determined by the ambient temperature plus the heat generated
by the operating current.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01
Oct. 2012
Choke Coils
■ Figure 1: L0,L1:Definition
DC Bias Characteristic
L0
L (μH)
L1
L0 : (Initial Inductance)
Inductance when Idc is zero
L1 : (Inductance at flat point)
point where the measured inductance is 80 % of its initial value
0
0
Idc (A)
■ Figure 2: Dimensions in mm (not to scale)
■ Recommended Land Pattern in mm (not to scale)
5.6
(6.0)
12.5±0.4
12.5±0.3
6
Date code
5.7 max.
MARKING
1.2±0.2
10.8
2.0
( ) : Reference value
0.05 min.: Clearance between
the Terminal surface
and the case surface
2.1 min.
8.0±0.2
5.0±0.1
8.0±0.2
0.6 min.
2.0
(10.0)
1.2±0.2
1.3±0.2
0.3 min.: Clearance between
the Terminal surface
and the surface of the molded resin case
■ Packaging Methods, Soldering Conditions and Safety Precautions (Power Choke Coils for Consumer use)
Please see Data Files
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01
Oct. 2012